GT8MEDIA finder pro

V8 FINDER PRO2 /V8 FINDER2 / BT03 /BT05

Moderators: admin, GTMedia Team

Post Reply
thierry95
Posts: 1
Joined: Fri Apr 07, 2023 8:35 pm

GT8MEDIA finder pro

Post by thierry95 »

Bonjour, petit problème sur mon gtmedia V8 finder pro je n'ai plus la tension de 13 et 18V à la sortie antenne sat lnb je n'ai que 6,75v donc cela ne fonctionne pas quand je mets un bias te pour alimenter la tete la ca fonctionne comment faire surement un fusible ou un composant hs qui possède les schémas électroniques ou un réparateur pour ce matériel merci de vos reponses

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: GT8MEDIA finder pro

Post by Feralkiwi »

Check the menu.
There is an option for LNB power on off.
If that is off that may be the issue.

Testing with no load can also give a false reading as the switch mode supply may pulse.

Also I have seen the over current protection turn on off on off and this results in a low voltage being detected.

There were issues with earlier software with regard to overcurrent protection / LNB short being reported on screen with some units.
Are you using the latest software?

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

Post Reply

Return to “GTMEDIA FINDER SERIES”