Page 1 of 1
Finder Pro 2 won´t start after disconnecting battery.
Posted: Sun Jan 28, 2024 8:49 pm
by CC-Army
Hi,
I got the GT Media V8 Finder Pro 2 and everything was fine, even after updating the firmware.
The f connector got loose and the inner conductor broke off. After resoldering the device wont turn on anymore.
When connecting the charger the charging light switches on and thats it.
Re: Finder Pro 2 won´t start after disconnecting battery.
Posted: Tue Jan 30, 2024 10:54 pm
by salah
The worst thing about this device tuner= Bad type, easy to break
Re: Finder Pro 2 won´t start after disconnecting battery.
Posted: Wed Jan 31, 2024 7:25 pm
by Feralkiwi
CC-Army wrote: ↑Sun Jan 28, 2024 8:49 pm
Hi,
I got the GT Media V8 Finder Pro 2 and everything was fine, even after updating the firmware.
The f connector got loose and the inner conductor broke off. After resoldering the device wont turn on anymore.
When connecting the charger the charging light switches on and thats it.
Check the F connector for a short.
Check the battery cable and the cable to the video board.
You could also try a forced USB recovery.
Owen
Re: Finder Pro 2 won´t start after disconnecting battery.
Posted: Mon Feb 12, 2024 10:45 pm
by maxx1
Feralkiwi wrote: ↑Wed Jan 31, 2024 7:25 pm
CC-Army wrote: ↑Sun Jan 28, 2024 8:49 pm
Hi,
I got the GT Media V8 Finder Pro 2 and everything was fine, even after updating the firmware.
The f connector got loose and the inner conductor broke off. After resoldering the device wont turn on anymore.
When connecting the charger the charging light switches on and thats it.
Check the F connector for a short.
Check the battery cable and the cable to the video board.
You could also try a forced USB recovery.
Owen
How do you do forced USB recovery on V8 Finder Pro2?
Re: Finder Pro 2 won´t start after disconnecting battery.
Posted: Mon Feb 12, 2024 11:04 pm
by Feralkiwi
Try a different charger, one that offers 9 and 12v type C.
I found my pro 1 did not charge on a 5 volt only, but did on a c type car charger.
If the battery does not see charge it will not allow turn on.
Owen
recovery here
viewtopic.php?f=67&t=14431
Re: Finder Pro 2 won´t start after disconnecting battery.
Posted: Mon Apr 08, 2024 5:22 pm
by Amin nasab
Feralkiwi wrote: ↑Mon Feb 12, 2024 11:04 pm
Try a different charger, one that offers 9 and 12v type C.
I found my pro 1 did not charge on a 5 volt only, but did on a c type car charger.
If the battery does not see charge it will not allow turn on.
Owen
recovery here
viewtopic.php?f=67&t=14431
Greetings from the engineers of GTMEDIA company, since the arrival of this finder and the products of this company, unfortunately I have not seen any correct calibration on the V8 PRO V2. I have a history of working with the X Cruiser company. I fixed it and shared all the problems with the company and within 70 days all the problems were solved and this finder fix set was finalized. I don't see any specialist from GTMEDIA here to cooperate. If there is, please reply so that we can fix the V2 series at least. , Thanks