Hola!
Tengo antena colectiva a Astra 19.2E.
Anteriormente tenía un GtMedia v8x y ahora he adquirido un X8.
Pues con el X8 nuevo no recibo calidad en Astra 19.2E, en cambio la recibo en Astra 23.5E, He probado poniendole el firmware que trae el menú Oro y exactamente igual.
Creo que es imposible que teniendo la antena en Astra 19.2E, me coja calidad en 23.5E.
A alguien más le ha pasado esto?
Será simplemente un fallo en la ordenación del menú o algo así? Y están nombradas alrevés?
Se puede corregir este menú? He visto que con otros firmwares no se corrige.
X8 sin señal en Astra 19.2E
Moderators: admin, GTMedia Team
Re: X8 sin señal en Astra 19.2E
If you have just one satellite dish, then if you scan any satellite on the list in the menu it will only give channels for the same one dish / satellite.
Check that you have the correct antenna settings for the satellite you want.
LNB frequency etc.
If you are not sure, try 9750/10600 and do a blind scan as that will find the frequencies / channels that are there, while a "Auto" scan only uses the frequencies listed in the unit at factory start.
Owen
Check that you have the correct antenna settings for the satellite you want.
LNB frequency etc.
If you are not sure, try 9750/10600 and do a blind scan as that will find the frequencies / channels that are there, while a "Auto" scan only uses the frequencies listed in the unit at factory start.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: X8 sin señal en Astra 19.2E
Tengo una sola antena.
Lo tengo todo configurado tal y como lo tenía en el v8x.
Hago una búsqueda de canales seleccionando Astra 23.5E en 9750/10600 y me encuentra los mismos canales que tenía antes en Astra 19.2E, es decir, todos los de España de M+ y compañía.
Es por eso que sospecho que cuando me indica Astra 23.5E, creo que en realidad es 19.2E y está mal nombrado.
Lo raro es que a nadie más le haya pasado esto. No me fío de dejarlo así y que con el tiempo me de cuenta de que me falla algún canal.
Lo tengo todo configurado tal y como lo tenía en el v8x.
Hago una búsqueda de canales seleccionando Astra 23.5E en 9750/10600 y me encuentra los mismos canales que tenía antes en Astra 19.2E, es decir, todos los de España de M+ y compañía.
Es por eso que sospecho que cuando me indica Astra 23.5E, creo que en realidad es 19.2E y está mal nombrado.
Lo raro es que a nadie más le haya pasado esto. No me fío de dejarlo así y que con el tiempo me de cuenta de que me falla algún canal.
Re: X8 sin señal en Astra 19.2E
As you have said yourself, you are receiving channels from 19e, with your dish set at 19e.
But you have selected 23e in the receiver to scan, were you should select 19e then carry out a blind scan of the said satellite, then with the remote delete the channels that you do not require.
If 19e is not within the X8 receiver, you could add it to the data base then blind scan.
Den
But you have selected 23e in the receiver to scan, were you should select 19e then carry out a blind scan of the said satellite, then with the remote delete the channels that you do not require.
If 19e is not within the X8 receiver, you could add it to the data base then blind scan.
Den
Re: X8 sin señal en Astra 19.2E
He hecho un reset factory y he realizado una búsqueda ciega seleccionando Astra 19.2E (indicando 0% de calidad).
Al hacer la búsqueda, me ha encontrado todos los canales como si hubiera señal correcta. Y tras terminar la búsqueda ya me indica señal y calidad correcta en 19.2E.
Thank you, so much!!
Al hacer la búsqueda, me ha encontrado todos los canales como si hubiera señal correcta. Y tras terminar la búsqueda ya me indica señal y calidad correcta en 19.2E.
Thank you, so much!!
Re: X8 sin señal en Astra 19.2E
Glad to hear that you are sorted.
It could be that the first transponder within the data base of the receiver for 19e , is no longer been used, that may be why you got (No Signal).
Den
It could be that the first transponder within the data base of the receiver for 19e , is no longer been used, that may be why you got (No Signal).
Den
Re: X8 sin señal en Astra 19.2E
In the Astra 19.2E spectrum, the frequencies 10714H, 10862H and 10406V have no signal
Re: X8 sin señal en Astra 19.2E
These freq. are empty, see _https://flysat.com/en/satellite/position/19-2-e
I think 10406 V was 11406 V.
GTX Combo - V8 UHD - GT combo - V8 Finder Pro - V7 Pro - V8X - V8 Turbo - X8 - X8 combo - V8 Pro 2 - D2 DAB+
Re: X8 sin señal en Astra 19.2E
Acuérdate de que ya no puedes hacer otra búsqueda a ciegas si no querés que 8 canales de Astra 19.2 no pierdan ésa señal, si necesitas agregar un canal mejor por TPSanty992 wrote: ↑Mon Mar 28, 2022 8:48 pmHe hecho un reset factory y he realizado una búsqueda ciega seleccionando Astra 19.2E (indicando 0% de calidad).
Al hacer la búsqueda, me ha encontrado todos los canales como si hubiera señal correcta. Y tras terminar la búsqueda ya me indica señal y calidad correcta en 19.2E.
Thank you, so much!!