Biss autoroll key lost on reboot

GTMEDIA X8/GTMEDIA_X8COMBO

Moderators: admin, GTMedia Team

Post Reply
User avatar
Rishirajpoot
Posts: 83
Joined: Wed Jun 13, 2018 11:33 am
Location: INDIA

Biss autoroll key lost on reboot

Post by Rishirajpoot »

Dear Gt media team i am expecting that in new update you will solve the issue of temporary retention of biss keys so that once key is autorolled then it will stored in receiver permanently and not lost on reboot but i am disappointed.....kindly incorporate this feature soon, it will be very useful
Receiving>0.8W,3e,7e,9e,10e,13e,16e,21e,26e,36e,39e,40e,42e,45e,49e,52.5e,53e, 57e,58e,66e,68e,70e,75e,76.5e,78e,83e,85e,88e,91e,93.5e,95e,97.5e,98e,100.5e,105e,110e,115e,119e,128e,134e,138e & many more...

STRETCH
Posts: 3642
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: Biss autoroll key lost on reboot

Post by STRETCH »

That is the reason why you should put your keys onto a usb before you update to the latest software.

Den

User avatar
Tom.w
网站管理员
Posts: 1786
Joined: Mon Jul 27, 2020 3:58 am

Re: Biss autoroll key lost on reboot

Post by Tom.w »

hello
about the biss autoroll key, you need to keep the box connected to the internet.
then it will work directly.

User avatar
Rishirajpoot
Posts: 83
Joined: Wed Jun 13, 2018 11:33 am
Location: INDIA

Re: Biss autoroll key lost on reboot

Post by Rishirajpoot »

Dear can you adapt the firmware so the key need to be downloaded only when there is a change or upgrade otherwise stored key is used
Receiving>0.8W,3e,7e,9e,10e,13e,16e,21e,26e,36e,39e,40e,42e,45e,49e,52.5e,53e, 57e,58e,66e,68e,70e,75e,76.5e,78e,83e,85e,88e,91e,93.5e,95e,97.5e,98e,100.5e,105e,110e,115e,119e,128e,134e,138e & many more...

User avatar
Feralkiwi
网站管理员
Posts: 8340
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Biss autoroll key lost on reboot

Post by Feralkiwi »

Rishirajpoot wrote:
Sun May 09, 2021 12:14 pm
Dear can you adapt the firmware so the key need to be downloaded only when there is a change or upgrade otherwise stored key is used
The rolled keys are kept in the MGBISS section.
If you "Export" your softcam.key file you can see these keys on your PC using notepad.

These stored keys are used, but the unit wants to check via the net for updates each time you power on, so to use the keys in MGBISS you must have the net connected.
If you need to run with no net, you can copy each key over to the normal BISS section and add the TP info needed.
You will need to add a line in the softcam.key file (or add a key for in the menus) for each channel on the TP.
These line need to be in the correct format for the normal BISS section.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

User avatar
Rishirajpoot
Posts: 83
Joined: Wed Jun 13, 2018 11:33 am
Location: INDIA

Re: Biss autoroll key lost on reboot

Post by Rishirajpoot »

ok thanks dear
Receiving>0.8W,3e,7e,9e,10e,13e,16e,21e,26e,36e,39e,40e,42e,45e,49e,52.5e,53e, 57e,58e,66e,68e,70e,75e,76.5e,78e,83e,85e,88e,91e,93.5e,95e,97.5e,98e,100.5e,105e,110e,115e,119e,128e,134e,138e & many more...

Matthieu Kilongwe
Posts: 4
Joined: Mon Dec 20, 2021 9:54 am

Re: Biss autoroll key lost on reboot

Post by Matthieu Kilongwe »

Bonjour la grande famille, s'il-vous-plaît aidez-moi, j'ai un problème avec mon Gtmedia X8 combo, c'est depuis que j'avais acheté c'est trucs là, je n'ai pas encore sentir même la valeur, j'avais fais la mise à jour et me connecter sur internet , aucune chaînes n'a été ouvrir, alors je ne sais pas si j'ai mal installer, alors je vous demande de m'aider, s'il-vous-plaît, j'avais beaucoup visé le 3, 5, 7, 9, 10, 16, 28, 36 degré, mais rien, il ya seulement le FTA, que puis-je faire ?

STRETCH
Posts: 3642
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: Biss autoroll key lost on reboot

Post by STRETCH »

Most of the channels on those satellites are not supported by the said receiver, apart from 3e were there are some Biss channels that clear with keys, or keys found when connected to the net.
The other channels could be cleared by other means , which i am not into, so cannot help there.

Den

lambro
Posts: 4
Joined: Tue Nov 09, 2021 9:25 pm

Re: Biss autoroll key lost on reboot

Post by lambro »

Hi to all, I have done the same error, I bought the decoder and updated the firmware without saving the softcam.key.

There is a guide to explane how the auto biss works.

Best regards,

Lambro

User avatar
Feralkiwi
网站管理员
Posts: 8340
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Biss autoroll key lost on reboot

Post by Feralkiwi »

For auto BISS you need the internet connected and then wait on the channel for it to find the key.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

lambro
Posts: 4
Joined: Tue Nov 09, 2021 9:25 pm

Re: Biss autoroll key lost on reboot

Post by lambro »

Dear Ower,

thank you for prompt reply,

I have a GTMEADIA V8 UHD and is conneced to internet because I can see the youtube videos.

Has been connected to the internet for about 6 hours.

Best regards,

Lambro

User avatar
Feralkiwi
网站管理员
Posts: 8340
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Biss autoroll key lost on reboot

Post by Feralkiwi »

Some new BISS feeds use BISS 2 that does not auto roll.

You can only make the unit roll the key via the internet once with the UHD.
After that it will not try again to save the server being over worked.
Once it is powered off / on it will try to roll again.
If you leave the channel while it is rolling, it will stop the roll.
Most rolls take only a few minutes. If it is taking much longer (greater than 5 minutes) then it is unlikely to roll or the server is busy.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

lambro
Posts: 4
Joined: Tue Nov 09, 2021 9:25 pm

Re: Biss autoroll key lost on reboot

Post by lambro »

Hi Owen, thank you again,

I added a picture, can be usefull ?

CA System is ND or N.

Do I have to configure the server?

Lambro
Attachments
IMG_1058.jpg
IMG_1058.jpg (148.79 KiB) Viewed 2618 times

User avatar
Feralkiwi
网站管理员
Posts: 8340
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Biss autoroll key lost on reboot

Post by Feralkiwi »

Auto roll only works for BISS 1.
N and NC do not hack, the only way is to buy a Ccam account or have a paytv card.

Powervu also rolls from keys in the software, but does not need the internet. Only powervu rolls, not the newer powervu+ that most channels now are.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

lambro
Posts: 4
Joined: Tue Nov 09, 2021 9:25 pm

Re: Biss autoroll key lost on reboot

Post by lambro »

Dear Owen,

thank you for your time,

but I'm a dummy user, I thought it was enough to insert some codes in the files and upload files to the device. I realized that I don't know anything about biss, biss 1, PowerVu, Powervu +, Softcam and all the rest.
I try to read up a bit on the forum to understand what results I can get. Thank you for you support.

Best regards,

Lambro

Post Reply

Return to “GTMEDIA X8 SERIES”