Biss autoroll key lost on reboot
Moderators: admin, GTMedia Team
- Rishirajpoot
- Posts: 83
- Joined: Wed Jun 13, 2018 11:33 am
- Location: INDIA
Biss autoroll key lost on reboot
Dear Gt media team i am expecting that in new update you will solve the issue of temporary retention of biss keys so that once key is autorolled then it will stored in receiver permanently and not lost on reboot but i am disappointed.....kindly incorporate this feature soon, it will be very useful
Receiving>0.8W,3e,7e,9e,10e,13e,16e,21e,26e,36e,39e,40e,42e,45e,49e,52.5e,53e, 57e,58e,66e,68e,70e,75e,76.5e,78e,83e,85e,88e,91e,93.5e,95e,97.5e,98e,100.5e,105e,110e,115e,119e,128e,134e,138e & many more...
Re: Biss autoroll key lost on reboot
That is the reason why you should put your keys onto a usb before you update to the latest software.
Den
Den
Re: Biss autoroll key lost on reboot
hello
about the biss autoroll key, you need to keep the box connected to the internet.
then it will work directly.
about the biss autoroll key, you need to keep the box connected to the internet.
then it will work directly.
- Rishirajpoot
- Posts: 83
- Joined: Wed Jun 13, 2018 11:33 am
- Location: INDIA
Re: Biss autoroll key lost on reboot
Dear can you adapt the firmware so the key need to be downloaded only when there is a change or upgrade otherwise stored key is used
Receiving>0.8W,3e,7e,9e,10e,13e,16e,21e,26e,36e,39e,40e,42e,45e,49e,52.5e,53e, 57e,58e,66e,68e,70e,75e,76.5e,78e,83e,85e,88e,91e,93.5e,95e,97.5e,98e,100.5e,105e,110e,115e,119e,128e,134e,138e & many more...
Re: Biss autoroll key lost on reboot
The rolled keys are kept in the MGBISS section.Rishirajpoot wrote: ↑Sun May 09, 2021 12:14 pmDear can you adapt the firmware so the key need to be downloaded only when there is a change or upgrade otherwise stored key is used
If you "Export" your softcam.key file you can see these keys on your PC using notepad.
These stored keys are used, but the unit wants to check via the net for updates each time you power on, so to use the keys in MGBISS you must have the net connected.
If you need to run with no net, you can copy each key over to the normal BISS section and add the TP info needed.
You will need to add a line in the softcam.key file (or add a key for in the menus) for each channel on the TP.
These line need to be in the correct format for the normal BISS section.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
- Rishirajpoot
- Posts: 83
- Joined: Wed Jun 13, 2018 11:33 am
- Location: INDIA
Re: Biss autoroll key lost on reboot
ok thanks dear
Receiving>0.8W,3e,7e,9e,10e,13e,16e,21e,26e,36e,39e,40e,42e,45e,49e,52.5e,53e, 57e,58e,66e,68e,70e,75e,76.5e,78e,83e,85e,88e,91e,93.5e,95e,97.5e,98e,100.5e,105e,110e,115e,119e,128e,134e,138e & many more...
-
- Posts: 4
- Joined: Mon Dec 20, 2021 9:54 am
Re: Biss autoroll key lost on reboot
Bonjour la grande famille, s'il-vous-plaît aidez-moi, j'ai un problème avec mon Gtmedia X8 combo, c'est depuis que j'avais acheté c'est trucs là, je n'ai pas encore sentir même la valeur, j'avais fais la mise à jour et me connecter sur internet , aucune chaînes n'a été ouvrir, alors je ne sais pas si j'ai mal installer, alors je vous demande de m'aider, s'il-vous-plaît, j'avais beaucoup visé le 3, 5, 7, 9, 10, 16, 28, 36 degré, mais rien, il ya seulement le FTA, que puis-je faire ?
Re: Biss autoroll key lost on reboot
Most of the channels on those satellites are not supported by the said receiver, apart from 3e were there are some Biss channels that clear with keys, or keys found when connected to the net.
The other channels could be cleared by other means , which i am not into, so cannot help there.
Den
The other channels could be cleared by other means , which i am not into, so cannot help there.
Den
Re: Biss autoroll key lost on reboot
Hi to all, I have done the same error, I bought the decoder and updated the firmware without saving the softcam.key.
There is a guide to explane how the auto biss works.
Best regards,
Lambro
There is a guide to explane how the auto biss works.
Best regards,
Lambro
Re: Biss autoroll key lost on reboot
For auto BISS you need the internet connected and then wait on the channel for it to find the key.
Owen
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Biss autoroll key lost on reboot
Dear Ower,
thank you for prompt reply,
I have a GTMEADIA V8 UHD and is conneced to internet because I can see the youtube videos.
Has been connected to the internet for about 6 hours.
Best regards,
Lambro
thank you for prompt reply,
I have a GTMEADIA V8 UHD and is conneced to internet because I can see the youtube videos.
Has been connected to the internet for about 6 hours.
Best regards,
Lambro
Re: Biss autoroll key lost on reboot
Some new BISS feeds use BISS 2 that does not auto roll.
You can only make the unit roll the key via the internet once with the UHD.
After that it will not try again to save the server being over worked.
Once it is powered off / on it will try to roll again.
If you leave the channel while it is rolling, it will stop the roll.
Most rolls take only a few minutes. If it is taking much longer (greater than 5 minutes) then it is unlikely to roll or the server is busy.
Owen
You can only make the unit roll the key via the internet once with the UHD.
After that it will not try again to save the server being over worked.
Once it is powered off / on it will try to roll again.
If you leave the channel while it is rolling, it will stop the roll.
Most rolls take only a few minutes. If it is taking much longer (greater than 5 minutes) then it is unlikely to roll or the server is busy.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Biss autoroll key lost on reboot
Hi Owen, thank you again,
I added a picture, can be usefull ?
CA System is ND or N.
Do I have to configure the server?
Lambro
I added a picture, can be usefull ?
CA System is ND or N.
Do I have to configure the server?
Lambro
- Attachments
-
- IMG_1058.jpg (148.79 KiB) Viewed 2741 times
Re: Biss autoroll key lost on reboot
Auto roll only works for BISS 1.
N and NC do not hack, the only way is to buy a Ccam account or have a paytv card.
Powervu also rolls from keys in the software, but does not need the internet. Only powervu rolls, not the newer powervu+ that most channels now are.
Owen
N and NC do not hack, the only way is to buy a Ccam account or have a paytv card.
Powervu also rolls from keys in the software, but does not need the internet. Only powervu rolls, not the newer powervu+ that most channels now are.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Biss autoroll key lost on reboot
Dear Owen,
thank you for your time,
but I'm a dummy user, I thought it was enough to insert some codes in the files and upload files to the device. I realized that I don't know anything about biss, biss 1, PowerVu, Powervu +, Softcam and all the rest.
I try to read up a bit on the forum to understand what results I can get. Thank you for you support.
Best regards,
Lambro
thank you for your time,
but I'm a dummy user, I thought it was enough to insert some codes in the files and upload files to the device. I realized that I don't know anything about biss, biss 1, PowerVu, Powervu +, Softcam and all the rest.
I try to read up a bit on the forum to understand what results I can get. Thank you for you support.
Best regards,
Lambro