ABERTIS on 30W: a question to programmers
Moderators: admin, GTMedia Team
ABERTIS on 30W: a question to programmers
I have an enigma2 box and a 60cm disc and Abertis works without scratches
X8 and V7pro with 120cm disc have (NOT ALWAYS) scratches. WHY?
X8 and V7pro with 120cm disc have (NOT ALWAYS) scratches. WHY?
Re: ABERTIS on 30W: a question to programmers
Maybe the sensitivity of the turners within the receivers, could be one of the issues, is your 120cm dish on a motor or stand alone, the bigger the dish the more accurate you have to be in setting up the dish, here in the UK on the said satellite, with a 100cm dish on a motor, i can receive the Abertis channels with S95 / Q85 with a V7 Pro, and on another receiver i get the same readings but on another 100cm dish of my aerial farm with a V8X.
Den
Den
-
- Posts: 43
- Joined: Mon Nov 09, 2020 10:16 pm
Re: ABERTIS on 30W: a question to programmers
I think the issue now will be the Albertis signal reception on X8 combo .
There's a problem.
There's a problem.
-
- Posts: 12
- Joined: Fri Oct 02, 2020 9:46 am
Re: ABERTIS on 30W: a question to programmers
I think the problem is tuner sensitivity. Afterall, he is in same location, same satellite.
Re: ABERTIS on 30W: a question to programmers
From November 1st TV Canaria left Abertis package but now new channels from Catalonia are on this Abertis frequency.(11347H at 30°W).
It would be possible to add this new channels parameters to the softcam file in order to receive them on future firmware updates?.
Also on this frequency you can review CyL7 becáis from the beginning there is something wrong. The receiver show this channel when you do a search on this frequency but it never keep it on the list once you save and exit from the tuning menu.
It would be possible to add this new channels parameters to the softcam file in order to receive them on future firmware updates?.
Also on this frequency you can review CyL7 becáis from the beginning there is something wrong. The receiver show this channel when you do a search on this frequency but it never keep it on the list once you save and exit from the tuning menu.
Madrid(Spain).V8 UHD,V8 pro2 & V8x.Disecq 16x1.
Hellas 39°E-Astra 28.2°E-Badr 26°E 1.2m
Astra 19.2°E & 23.5ºE-Hotbird 13°E 80cm
Thor/Intelsat 0.8-1°W - Eutelsat 5ºW & 9E - Bulgariasat 1.9ºE - 80cm
Hispasat 30°W 80cm
Telstar 15°W 60cm
Hellas 39°E-Astra 28.2°E-Badr 26°E 1.2m
Astra 19.2°E & 23.5ºE-Hotbird 13°E 80cm
Thor/Intelsat 0.8-1°W - Eutelsat 5ºW & 9E - Bulgariasat 1.9ºE - 80cm
Hispasat 30°W 80cm
Telstar 15°W 60cm
Re: ABERTIS on 30W: a question to programmers
Thanks for the updated. Message sent for evaluation and future updated.gyver wrote: ↑Mon Nov 08, 2021 3:26 pmFrom November 1st TV Canaria left Abertis package but now new channels from Catalonia are on this Abertis frequency.(11347H at 30°W).
It would be possible to add this new channels parameters to the softcam file in order to receive them on future firmware updates?.
Also on this frequency you can review CyL7 becáis from the beginning there is something wrong. The receiver show this channel when you do a search on this frequency but it never keep it on the list once you save and exit from the tuning menu.
Re: ABERTIS on 30W: a question to programmers
I can also confirm that the same issue with the V8X receiver.
You scan the said transponder, 11347h 20857, you find five channels, TVG-SAT / TV3 / A7 / CANAL EXTREMADUR / CYL7, when you SAVE & EXIT, the said channel (CYL7), Does NOT save to the channel list.
Will put a post in the V8X section as well.
Den
You scan the said transponder, 11347h 20857, you find five channels, TVG-SAT / TV3 / A7 / CANAL EXTREMADUR / CYL7, when you SAVE & EXIT, the said channel (CYL7), Does NOT save to the channel list.
Will put a post in the V8X section as well.
Den
Re: ABERTIS on 30W: a question to programmers
The Team is already working on itgyver wrote: ↑Mon Nov 08, 2021 3:26 pmFrom November 1st TV Canaria left Abertis package but now new channels from Catalonia are on this Abertis frequency.(11347H at 30°W).
It would be possible to add this new channels parameters to the softcam file in order to receive them on future firmware updates?.
Also on this frequency you can review CyL7 becáis from the beginning there is something wrong. The receiver show this channel when you do a search on this frequency but it never keep it on the list once you save and exit from the tuning menu.
GTX Combo - V8 UHD - GT combo - V8 Finder Pro - V7 Pro - V8X - V8 Turbo - X8 - X8 combo - V8 Pro 2 - D2 DAB+
MISSING CHANNEL (ABERTIS) 11347H 20857
Thanks to (gyver) for the update with the (X8) receiver missing a channel from the channel list after a scan.
Carried out a scan of the said transponder on the V8X model, found five channels, TVG TDT-SAT / TV3 / A7 / CANAL EXTREMADUR / CYL7, when you (save and exit), the said channel (CYL7) does not save to the channel list.
Will update this post, after i have checked the other receivers that i have (V7 PRO) (V8UHD) (V8 Turbo).
After checking the other receivers, the only one with the same issue is the V8 Turbo.
Den
Carried out a scan of the said transponder on the V8X model, found five channels, TVG TDT-SAT / TV3 / A7 / CANAL EXTREMADUR / CYL7, when you (save and exit), the said channel (CYL7) does not save to the channel list.
Will update this post, after i have checked the other receivers that i have (V7 PRO) (V8UHD) (V8 Turbo).
After checking the other receivers, the only one with the same issue is the V8 Turbo.
Den
Re: ABERTIS on 30W: a question to programmers
Now I was testing this on a V8 pro2, but it’s more less the same issue with the V8x and CyL channel on this frequency.
Madrid(Spain).V8 UHD,V8 pro2 & V8x.Disecq 16x1.
Hellas 39°E-Astra 28.2°E-Badr 26°E 1.2m
Astra 19.2°E & 23.5ºE-Hotbird 13°E 80cm
Thor/Intelsat 0.8-1°W - Eutelsat 5ºW & 9E - Bulgariasat 1.9ºE - 80cm
Hispasat 30°W 80cm
Telstar 15°W 60cm
Hellas 39°E-Astra 28.2°E-Badr 26°E 1.2m
Astra 19.2°E & 23.5ºE-Hotbird 13°E 80cm
Thor/Intelsat 0.8-1°W - Eutelsat 5ºW & 9E - Bulgariasat 1.9ºE - 80cm
Hispasat 30°W 80cm
Telstar 15°W 60cm
Re: MISSING CHANNEL (ABERTIS) 11347H 20857
Can you make changes on the editor and reload?STRETCH wrote: ↑Mon Nov 08, 2021 4:14 pmThanks to (gyver) for the update with the (X8) receiver missing a channel from the channel list after a scan.
Carried out a scan of the said transponder on the V8X model, found five channels, TVG TDT-SAT / TV3 / A7 / CANAL EXTREMADUR / CYL7, when you (save and exit), the said channel (CYL7) does not save to the channel list.
Will update this post, after i have checked the other receivers that i have (V7 PRO) (V8UHD) (V8 Turbo).
After checking the other receivers, the only one with the same issue is the V8 Turbo.
Den
Maybe start with another TP / channel set and change the freq, sr, sid's etc over.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: ABERTIS on 30W: a question to programmers
I tested this option on a V8x and if you use an edited channel list Abertis channels will not work, and you will need to retune them again.
Madrid(Spain).V8 UHD,V8 pro2 & V8x.Disecq 16x1.
Hellas 39°E-Astra 28.2°E-Badr 26°E 1.2m
Astra 19.2°E & 23.5ºE-Hotbird 13°E 80cm
Thor/Intelsat 0.8-1°W - Eutelsat 5ºW & 9E - Bulgariasat 1.9ºE - 80cm
Hispasat 30°W 80cm
Telstar 15°W 60cm
Hellas 39°E-Astra 28.2°E-Badr 26°E 1.2m
Astra 19.2°E & 23.5ºE-Hotbird 13°E 80cm
Thor/Intelsat 0.8-1°W - Eutelsat 5ºW & 9E - Bulgariasat 1.9ºE - 80cm
Hispasat 30°W 80cm
Telstar 15°W 60cm
Re: ABERTIS on 30W: a question to programmers
Can confirm what (gyver) has said, took the details from the (V7Pro)/(V8UHD), down loaded the channel list details, added the said info, put the information back into the receivers, all that i got was a (black) screen, that is on the V8X and the V8Turbo, all other channels cleared as before, just this one channel,
Den
Den
Re: ABERTIS on 30W: a question to programmers
hello StretchSTRETCH wrote: ↑Tue Nov 09, 2021 10:43 amCan confirm what (gyver) has said, took the details from the (V7Pro)/(V8UHD), down loaded the channel list details, added the said info, put the information back into the receivers, all that i got was a (black) screen, that is on the V8X and the V8Turbo, all other channels cleared as before, just this one channel,
Den
Please send the channel database of v7pro and v8x after you scan the 11347h 20857, we will analyze the reason for the disappearance of this program in v8x
Re: ABERTIS on 30W: a question to programmers
Have sent the required information, as requested, sent working db info for V7 Pro / V8UHD, also sent db info for the receivers that do not work as they should V8X / V8 Turbo.
GTMedia are looking towards fixing the said issue.
Den
GTMedia are looking towards fixing the said issue.
Den
Re: ABERTIS on 30W: a question to programmers
Did Lin or someone from GT Media fix the problem? I just played the version GTMedia_V8X_Release_V319_20220519 on my box and my old settings for Abertis 30 West don't work. I did a new blind scan and now it works. I'll keep an eye on things too....Greetings Holzsat
-
- Posts: 1
- Joined: Tue Sep 20, 2022 6:10 am
Re: ABERTIS on 30W: a question to programmers
From November 1st TV Canaria left Abertis package but now new channels from Catalonia are on this Abertis frequency.(11347H at 30°W).
It would be possible to add this new channels parameters to the softcam file in order to receive them on future firmware updates?.
It would be possible to add this new channels parameters to the softcam file in order to receive them on future firmware updates?.
Re: ABERTIS on 30W: a question to programmers
On the V8X model, have scanned the said transponder, all channels found and clear, this is with (Mars) software.
Will check with my other receivers and give a update.
Den
Will check with my other receivers and give a update.
Den
-
- Posts: 173
- Joined: Tue Jul 30, 2019 3:30 pm
- Location: Italy
Re: ABERTIS on 30W: a question to programmers
If it could be useful, on the said transponder all channels found and clear even in no Mars version (GTMedia V8X Release V319 2022-05-19)
Re: ABERTIS on 30W: a question to programmers
The said channels clears with the following receivers V8 Turbo / V7 Pro / V8UHD / V7S2X.
@ notme13040
Have you added the said transponder to your receiver and carried out a scan to bring in the said channels.
Den
@ notme13040
Have you added the said transponder to your receiver and carried out a scan to bring in the said channels.
Den