ABERTIS on 30W: a question to programmers

GTMEDIA X8/GTMEDIA_X8COMBO

Moderators: admin, GTMedia Team

Post Reply
ddleite
Posts: 117
Joined: Fri Jun 30, 2017 5:01 pm
Location: porto, portugal

ABERTIS on 30W: a question to programmers

Post by ddleite »

I have an enigma2 box and a 60cm disc and Abertis works without scratches
X8 and V7pro with 120cm disc have (NOT ALWAYS) scratches. WHY?

STRETCH
Posts: 3641
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: ABERTIS on 30W: a question to programmers

Post by STRETCH »

Maybe the sensitivity of the turners within the receivers, could be one of the issues, is your 120cm dish on a motor or stand alone, the bigger the dish the more accurate you have to be in setting up the dish, here in the UK on the said satellite, with a 100cm dish on a motor, i can receive the Abertis channels with S95 / Q85 with a V7 Pro, and on another receiver i get the same readings but on another 100cm dish of my aerial farm with a V8X.

Den

agudahlucky
Posts: 43
Joined: Mon Nov 09, 2020 10:16 pm

Re: ABERTIS on 30W: a question to programmers

Post by agudahlucky »

I think the issue now will be the Albertis signal reception on X8 combo .
There's a problem.

bellodankatsina
Posts: 12
Joined: Fri Oct 02, 2020 9:46 am

Re: ABERTIS on 30W: a question to programmers

Post by bellodankatsina »

I think the problem is tuner sensitivity. Afterall, he is in same location, same satellite.

User avatar
gyver
Posts: 106
Joined: Thu Apr 20, 2017 10:28 am
Location: Madrid

Re: ABERTIS on 30W: a question to programmers

Post by gyver »

From November 1st TV Canaria left Abertis package but now new channels from Catalonia are on this Abertis frequency.(11347H at 30°W).
It would be possible to add this new channels parameters to the softcam file in order to receive them on future firmware updates?.
Also on this frequency you can review CyL7 becáis from the beginning there is something wrong. The receiver show this channel when you do a search on this frequency but it never keep it on the list once you save and exit from the tuning menu.
Madrid(Spain).V8 UHD,V8 pro2 & V8x.Disecq 16x1.
Hellas 39°E-Astra 28.2°E-Badr 26°E 1.2m
Astra 19.2°E & 23.5ºE-Hotbird 13°E 80cm
Thor/Intelsat 0.8-1°W - Eutelsat 5ºW & 9E - Bulgariasat 1.9ºE - 80cm
Hispasat 30°W 80cm
Telstar 15°W 60cm

User avatar
cpr43
网站管理员
Posts: 7046
Joined: Thu Aug 11, 2016 1:41 pm

Re: ABERTIS on 30W: a question to programmers

Post by cpr43 »

gyver wrote:
Mon Nov 08, 2021 3:26 pm
From November 1st TV Canaria left Abertis package but now new channels from Catalonia are on this Abertis frequency.(11347H at 30°W).
It would be possible to add this new channels parameters to the softcam file in order to receive them on future firmware updates?.
Also on this frequency you can review CyL7 becáis from the beginning there is something wrong. The receiver show this channel when you do a search on this frequency but it never keep it on the list once you save and exit from the tuning menu.
Thanks for the updated. Message sent for evaluation and future updated.

STRETCH
Posts: 3641
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: ABERTIS on 30W: a question to programmers

Post by STRETCH »

I can also confirm that the same issue with the V8X receiver.
You scan the said transponder, 11347h 20857, you find five channels, TVG-SAT / TV3 / A7 / CANAL EXTREMADUR / CYL7, when you SAVE & EXIT, the said channel (CYL7), Does NOT save to the channel list.
Will put a post in the V8X section as well.

Den

Delirium
Posts: 663
Joined: Sat Mar 02, 2019 6:39 am
Location: Italy

Re: ABERTIS on 30W: a question to programmers

Post by Delirium »

gyver wrote:
Mon Nov 08, 2021 3:26 pm
From November 1st TV Canaria left Abertis package but now new channels from Catalonia are on this Abertis frequency.(11347H at 30°W).
It would be possible to add this new channels parameters to the softcam file in order to receive them on future firmware updates?.
Also on this frequency you can review CyL7 becáis from the beginning there is something wrong. The receiver show this channel when you do a search on this frequency but it never keep it on the list once you save and exit from the tuning menu.
The Team is already working on it :)

Image Image
GTX Combo - V8 UHD - GT combo - V8 Finder Pro - V7 Pro - V8X - V8 Turbo - X8 - X8 combo - V8 Pro 2 - D2 DAB+

STRETCH
Posts: 3641
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

MISSING CHANNEL (ABERTIS) 11347H 20857

Post by STRETCH »

Thanks to (gyver) for the update with the (X8) receiver missing a channel from the channel list after a scan.
Carried out a scan of the said transponder on the V8X model, found five channels, TVG TDT-SAT / TV3 / A7 / CANAL EXTREMADUR / CYL7, when you (save and exit), the said channel (CYL7) does not save to the channel list.
Will update this post, after i have checked the other receivers that i have (V7 PRO) (V8UHD) (V8 Turbo).
After checking the other receivers, the only one with the same issue is the V8 Turbo.

Den

User avatar
gyver
Posts: 106
Joined: Thu Apr 20, 2017 10:28 am
Location: Madrid

Re: ABERTIS on 30W: a question to programmers

Post by gyver »

Now I was testing this on a V8 pro2, but it’s more less the same issue with the V8x and CyL channel on this frequency.
Madrid(Spain).V8 UHD,V8 pro2 & V8x.Disecq 16x1.
Hellas 39°E-Astra 28.2°E-Badr 26°E 1.2m
Astra 19.2°E & 23.5ºE-Hotbird 13°E 80cm
Thor/Intelsat 0.8-1°W - Eutelsat 5ºW & 9E - Bulgariasat 1.9ºE - 80cm
Hispasat 30°W 80cm
Telstar 15°W 60cm

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: MISSING CHANNEL (ABERTIS) 11347H 20857

Post by Feralkiwi »

STRETCH wrote:
Mon Nov 08, 2021 4:14 pm
Thanks to (gyver) for the update with the (X8) receiver missing a channel from the channel list after a scan.
Carried out a scan of the said transponder on the V8X model, found five channels, TVG TDT-SAT / TV3 / A7 / CANAL EXTREMADUR / CYL7, when you (save and exit), the said channel (CYL7) does not save to the channel list.
Will update this post, after i have checked the other receivers that i have (V7 PRO) (V8UHD) (V8 Turbo).
After checking the other receivers, the only one with the same issue is the V8 Turbo.

Den
Can you make changes on the editor and reload?
Maybe start with another TP / channel set and change the freq, sr, sid's etc over.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

User avatar
gyver
Posts: 106
Joined: Thu Apr 20, 2017 10:28 am
Location: Madrid

Re: ABERTIS on 30W: a question to programmers

Post by gyver »

I tested this option on a V8x and if you use an edited channel list Abertis channels will not work, and you will need to retune them again.
Madrid(Spain).V8 UHD,V8 pro2 & V8x.Disecq 16x1.
Hellas 39°E-Astra 28.2°E-Badr 26°E 1.2m
Astra 19.2°E & 23.5ºE-Hotbird 13°E 80cm
Thor/Intelsat 0.8-1°W - Eutelsat 5ºW & 9E - Bulgariasat 1.9ºE - 80cm
Hispasat 30°W 80cm
Telstar 15°W 60cm

STRETCH
Posts: 3641
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: ABERTIS on 30W: a question to programmers

Post by STRETCH »

Can confirm what (gyver) has said, took the details from the (V7Pro)/(V8UHD), down loaded the channel list details, added the said info, put the information back into the receivers, all that i got was a (black) screen, that is on the V8X and the V8Turbo, all other channels cleared as before, just this one channel,

Den

User avatar
Tom.w
网站管理员
Posts: 1786
Joined: Mon Jul 27, 2020 3:58 am

Re: ABERTIS on 30W: a question to programmers

Post by Tom.w »

STRETCH wrote:
Tue Nov 09, 2021 10:43 am
Can confirm what (gyver) has said, took the details from the (V7Pro)/(V8UHD), down loaded the channel list details, added the said info, put the information back into the receivers, all that i got was a (black) screen, that is on the V8X and the V8Turbo, all other channels cleared as before, just this one channel,

Den
hello Stretch
Please send the channel database of v7pro and v8x after you scan the 11347h 20857, we will analyze the reason for the disappearance of this program in v8x

STRETCH
Posts: 3641
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: ABERTIS on 30W: a question to programmers

Post by STRETCH »

Have sent the required information, as requested, sent working db info for V7 Pro / V8UHD, also sent db info for the receivers that do not work as they should V8X / V8 Turbo.
GTMedia are looking towards fixing the said issue.

Den

Holzsat
Posts: 51
Joined: Sat Mar 09, 2019 1:24 pm
Location: Berlin

Re: ABERTIS on 30W: a question to programmers

Post by Holzsat »

Did Lin or someone from GT Media fix the problem? I just played the version GTMedia_V8X_Release_V319_20220519 on my box and my old settings for Abertis 30 West don't work. I did a new blind scan and now it works. I'll keep an eye on things too....Greetings Holzsat

notme13040
Posts: 1
Joined: Tue Sep 20, 2022 6:10 am

Re: ABERTIS on 30W: a question to programmers

Post by notme13040 »

From November 1st TV Canaria left Abertis package but now new channels from Catalonia are on this Abertis frequency.(11347H at 30°W).
It would be possible to add this new channels parameters to the softcam file in order to receive them on future firmware updates?.

STRETCH
Posts: 3641
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: ABERTIS on 30W: a question to programmers

Post by STRETCH »

On the V8X model, have scanned the said transponder, all channels found and clear, this is with (Mars) software.
Will check with my other receivers and give a update.

Den

Cluster.One
Posts: 172
Joined: Tue Jul 30, 2019 3:30 pm
Location: Italy

Re: ABERTIS on 30W: a question to programmers

Post by Cluster.One »

STRETCH wrote:
Sat Jan 21, 2023 9:07 am
On the V8X model, have scanned the said transponder, all channels found and clear, this is with (Mars) software.
Will check with my other receivers and give a update.

Den
If it could be useful, on the said transponder all channels found and clear even in no Mars version (GTMedia V8X Release V319 2022-05-19)

STRETCH
Posts: 3641
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: ABERTIS on 30W: a question to programmers

Post by STRETCH »

The said channels clears with the following receivers V8 Turbo / V7 Pro / V8UHD / V7S2X.
@ notme13040
Have you added the said transponder to your receiver and carried out a scan to bring in the said channels.

Den

Post Reply

Return to “GTMEDIA X8 SERIES”