x8 combo remote control problem

GTMEDIA X8/GTMEDIA_X8COMBO

Moderators: admin, GTMedia Team

Post Reply
arrrer
Posts: 2
Joined: Sun Feb 27, 2022 10:50 am

x8 combo remote control problem

Post by arrrer »

hi, does anyone have problem with remote control on x8 combo? remote control works (checked on different reciever), but on my reciever it work occasionally - one time for a week - and rest of time not (just afer purchase it was ok).

STRETCH
Posts: 3641
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: x8 combo remote control problem

Post by STRETCH »

May be the receiver is not seeing the signal from the remote.

Den

arrrer
Posts: 2
Joined: Sun Feb 27, 2022 10:50 am

Re: x8 combo remote control problem

Post by arrrer »

but is it just hardware problem? I have updated software and it is still the same condition. How it can not see the signal if remote control is next to it? Where is the IR reciver insine located?)

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: x8 combo remote control problem

Post by Feralkiwi »

Look at the IR LED in the end of the remote through a digital camera.
You should see it flashing brightly as you press buttons.
Compare that to other remotes to see if it is fully bright.

If it is weak, check the batteries, the battery terminals etc.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

Post Reply

Return to “GTMEDIA X8 SERIES”