V8UHD MORTO

Paese italiano, discussione sul prodotto GTMEDIA

Moderators: admin, GTMedia Team

Post Reply
alexv8uhd
Posts: 3
Joined: Tue Sep 21, 2021 8:36 pm

V8UHD MORTO

Post by alexv8uhd »

Buonasera,ho acquistato un V8UHD a maggio da un venditore su eBay arrivato dalla Cina,2 giorni fa il decoder ha smesso di funzionare,mentre stavo guardando la Tv con Tivùsat sono comparse a video delle macchie verdi e si è spento e non si è più acceso :| non credo che sia un problema di alimentazione,è completamente morto! Sono un po’ amareggiato perché l’ho acquistato da meno di 4 mesi e già non funziona più!il venditore non mi risponde su eBay e voglio capire se è possibile inviarlo in garanzia o chiedere direttamente la sostituzione!spero che qualcuno possa aiutarmi.

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: V8UHD MORTO

Post by Feralkiwi »

Does the unit have a single green LED on the front panel?

If so you can do a forced recovery.

Here are my notes on flash.bin.

flash.bin recovery is done like this.

Place a copy of the unpacked software (the .bin file) on a USB stick and rename it "flash.bin"
With the USB in the unit, power on while repeat pressing "Menu" on the remote.
The unit should reload the software.

Also other users say that you must use a USB stick, not a card holder etc and that stick must be 32Gb or under.
Use the rear USB port on units that have two ports.

I have had units that will not recover.
Try using the same software as was in the unit when it crashed, not the new update software.
You must use the correct software, ie that for the V7HD for the V7HD etc, not software for any other freesat units.

Try even older software as the file for flash.bin.

Look at the LED in the USB stick. When the TV shows the message "USB Upgrade, do not turn off" you should see the LED on the USB flash as the file is loaded.
The USB LED should also flash a few times as the unit first powers on and looks at it.
Also users have said to use the rear USB port for this on V8 units.

New information: Users are reporting that naming the file "Flash.bin" with a capital has worked where "flash.bin" has not. This is with the Nova units mostly.

Edited 24 Aug 2021
I found that a USB stick with a lot (more than 30+) .bin files on it, my UHD unit would not show the new software file in the menus.
This suggests that having too many .bin files on the USB stick can also be a problem.
I moved most of the file into a folder and it then showed the file.
Keep only one or two files in the main directory.

Edited 21 Sept 2021
From the PDF file for the V7 V8.
6. V7 V8 USB forced upgrade:::
6.1. Connect the power, and press “MENU” continuously with the remote control.
Note: Press the button continuously.
This should read repeatedly"

6.2.Digital tube shows UP9,,,After releasing the MENU button, enter the upgrade mode

Good luck

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

alexv8uhd
Posts: 3
Joined: Tue Sep 21, 2021 8:36 pm

Re: V8UHD MORTO

Post by alexv8uhd »

Non compare alcun led,è come se fosse completamente morto.Durante l’utilizzo si è spento e non accende più,provo a vedere se con un altro alimentatore con lo stesso amperaggio e tensione lo faccia ripartire.ma non credo che sia un problema di alimentazione,è completamente morto

yesesta
Posts: 66
Joined: Mon Sep 07, 2020 3:36 am

Re: V8UHD MORTO

Post by yesesta »

alexv8uhd wrote:
Thu Sep 23, 2021 1:51 pm
Buonasera,ho acquistato un V8UHD a maggio da un venditore su eBay arrivato dalla Cina,2 giorni fa il decoder ha smesso di funzionare,mentre stavo guardando la Tv con Tivùsat sono comparse a video delle macchie verdi e si è spento e non si è più acceso :| non credo che sia un problema di alimentazione,è completamente morto! Sono un po’ amareggiato perché l’ho acquistato da meno di 4 mesi e già non funziona più!il venditore non mi risponde su eBay e voglio capire se è possibile inviarlo in garanzia o chiedere direttamente la sostituzione!spero che qualcuno possa aiutarmi.
If you bought on Ebay then you must have paid with PayPal. Make a claim with Paypal and they will wake up the vendor or get you a refund. Don't play with the box as you may loose any guarantee you have.

satirico
Posts: 4
Joined: Wed Oct 20, 2021 4:40 pm

Re: V8UHD MORTO

Post by satirico »

Stesso problema ha iniziato con riavvio e err1 up9 ho provato aggiornamento tramite USB nulla se non quello che resta con led verde senza nessun immagine di TV, sto provando tramite rs232a continua a darmi un errore quando provo a caricare il file bin mi dice il tools Memory error non so come procedere consigli grazie

User avatar
Tom.w
网站管理员
Posts: 1786
Joined: Mon Jul 27, 2020 3:58 am

Re: V8UHD MORTO

Post by Tom.w »

se provi a eseguire l'aggiornamento forzato, ma non riesci a risolvere il problema, prova a contattare il venditore.
if you try to do the force upgrade, but can not slove your issue,please try to cotact the seller.

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: V8UHD MORTO

Post by Feralkiwi »

satirico wrote:
Wed Nov 03, 2021 12:46 pm
Stesso problema ha iniziato con riavvio e err1 up9 ho provato aggiornamento tramite USB nulla se non quello che resta con led verde senza nessun immagine di TV, sto provando tramite rs232a continua a darmi un errore quando provo a caricare il file bin mi dice il tools Memory error non so come procedere consigli grazie
Hi

I posted this about using the UP9 screen blind.

Also regard RS232 check you have the correct port set in the tool for your port number on your PC.
I made a edit to my post on rs232 here. at the bottom fo the post.
Also my own posts when I first tied and failed here.
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

satirico
Posts: 4
Joined: Wed Oct 20, 2021 4:40 pm

Re: V8UHD MORTO

Post by satirico »

Provato mi dà sempre stb ememoru error grazie potrebbe essere il file.bin non adatto al gtmedia v8uhd? Sto usando l'ultimo aggiornamento ,e altri file sul sito ma la risposta è sempre Memory error

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: V8UHD MORTO

Post by Feralkiwi »

I will add you to the list for Tom.w to check.

He is working with UP9 issues and sending test software to fix to the users.

Please can you post a image of the UP9 screen you see on your TV.
You can attach it using the attachment button below the post window.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

Post Reply

Return to “Italia”