Firmware V 231

Paese italiano, discussione sul prodotto GTMEDIA

Moderators: admin, GTMedia Team

Post Reply
Welfir
Posts: 1
Joined: Tue Dec 08, 2020 12:01 am

Firmware V 231

Post by Welfir »

Scusate
Vi chiedo gentilmente una dritta su come salvare le impostazioni di modifica date in precedenza al GTMedia V8UHD tipo Favoriti, numerazione canali, ecc ecc in occasione del nuovo Firmware V 231.in quanto la procedura fatta in quello precedente non è andata a buon fine e ho perso e rifatto tutto
Grazie in anticipo x la risposta

User avatar
Tom.w
网站管理员
Posts: 1786
Joined: Mon Jul 27, 2020 3:58 am

Re: Firmware V 231

Post by Tom.w »

Ciao
prima di aggiornare il nuovo firmware, eseguire il backup del database. Dopo aver aggiornato il nuovo firmware, aggiornare il file di base

hello
before upgrade the new firmware,please backup the database.after you upgrade the new firmware,pleae upgrade the basebase file

leman60
Posts: 1
Joined: Fri Oct 01, 2021 8:02 pm

Re: Firmware V 231

Post by leman60 »

ho installato la nuova versione del firmware 231 e EXTREAM no mi decodifica i canali iptv. praticamente vedo i canali sulla lista VOD, la lista VIVERE mi fa vedere l'elenco canali ma non li decodifica. ho provato a portare il firmware alla versione precedente 228 ma non lo fa fare .
qualqcno sa qualcosa in merito?

c'e' un sistema per tornare al firmware precedente ?

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Firmware V 231

Post by Feralkiwi »

leman60 wrote:
Fri Oct 01, 2021 8:18 pm
ho installato la nuova versione del firmware 231 e EXTREAM no mi decodifica i canali iptv. praticamente vedo i canali sulla lista VOD, la lista VIVERE mi fa vedere l'elenco canali ma non li decodifica. ho provato a portare il firmware alla versione precedente 228 ma non lo fa fare .
qualqcno sa qualcosa in merito?

c'e' un sistema per tornare al firmware precedente ?
you can do a forced recovery to force older software to return.

Here are my notes on flash.bin.

flash.bin recovery is done like this.

Place a copy of the unpacked software (the .bin file) on a USB stick and rename it "flash.bin"
With the USB in the unit, power on while repeat pressing "Menu" on the remote.
The unit should reload the software.

Also other users say that you must use a USB stick, not a card holder etc and that stick must be 32Gb or under.
Use the rear USB port on units that have two ports.

I have had units that will not recover.
Try using the same software as was in the unit when it crashed, not the new update software.
You must use the correct software, ie that for the V7HD for the V7HD etc, not software for any other freesat units.

Try even older software as the file for flash.bin.

Look at the LED in the USB stick. When the TV shows the message "USB Upgrade, do not turn off" you should see the LED on the USB flash as the file is loaded.
The USB LED should also flash a few times as the unit first powers on and looks at it.
Also users have said to use the rear USB port for this on V8 units.

New information: Users are reporting that naming the file "Flash.bin" with a capital has worked where "flash.bin" has not. This is with the Nova units mostly.

Edited 24 Aug 2021
I found that a USB stick with a lot (more than 30+) .bin files on it, my UHD unit would not show the new software file in the menus.
This suggests that having too many .bin files on the USB stick can also be a problem.
I moved most of the file into a folder and it then showed the file.
Keep only one or two files in the main directory.

Edited 21 Sept 2021
From the PDF file for the V7 V8.
6. V7 V8 USB forced upgrade:::
6.1. Connect the power, and press “MENU” continuously with the remote control.
Note: Press the button continuously.
This should read repeatedly"

6.2.Digital tube shows UP9,,,After releasing the MENU button, enter the upgrade mode

Good luck

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

Post Reply

Return to “Italia”