GT COMBO feedback, problema numeri canali, e un paio di problemi minori

Paese italiano, discussione sul prodotto GTMEDIA

Moderators: admin, GTMedia Team

Post Reply
xandr271
Posts: 6
Joined: Sun Mar 13, 2022 11:21 pm

GT COMBO feedback, problema numeri canali, e un paio di problemi minori

Post by xandr271 »

Buongiorno,

ho acquistato di recente un gt combo per vedere digitale terrestre e satellite, non uso card, lo uso solo per canali tv e gratuiti, si è aggiornato senza problemi all'ultima versione di firmware.

L'hardware del box è molto interessante, compatto, mi sembra scaldare poco niente, la qualità audio/video mi sembra accettabile/buona (lo uso con un vecchio tv hdready), ho fatto qualche prova anche con youtube e in wifi funziona bene (devo ancora provare amazon prime e non ho provato a installare altre applicazioni android per ora).
Ho provato ad attaccagli un mouse wifi usb e funziona, utile con il browser (invece non ho ancora provato ma immagino che funziona anche la tastiera).
Ho notato che quando uso una penna usb per importare/esportare i canali dopo qualche minuto la penna scalda un po' (porta usb3).
Ho provato il play dell'esportazione m3u con vlc da pc e funziona (funzione interessante, anche se non mi è chiaro perché in alcune occasioni sembra non partire il server del box, il box risponde al ping ma vlc non si connette, quando uso questa funzione lascio il box acceso ma la tv la voglio spenta).
Ho provato l'applicazione GT-share per android su un tablet e purtroppo ha qualche problema di performance nel playback, non credo dipenda dal wifi visto che con vlc da pc funziona bene, e non credo dipenda dalla tablet, la uso quotidianamente per il playback di video hd.

Mi sembra un bel box, l'unico grosso problema che ho visto è la gestione della numerazione dei canali:
questa cosa mi ha fatto impazzire per una settimana o più, ho letto di altri utenti nel forum con lo stesso problema, ma non ho visto soluzioni.
Ho visto che si parla di LCN attivo/disattivo, ho visto che c'è un opzione nella scansione satellitare "LCN italia" (non mi è chiaro cosa fa, sembra fare una scansione ma esce subito), ho letto che non è possibile spostare i canali se LCN è attivo (come da errore visualizzato dal box).
- primo problema è che non vedo opzioni per disattivare LCN, in particolare per il digitale terrestre, posso spostare i canali per il satellitare, non quelli terrestri.
- secondo problema è che cambiando canale con il telecomando sù/giù non mi sembra rispettare i numeri lcn, visualizza il numero lcn ma salta secondo la numerazione interna (channel_number nell'export dvbchannel.xml), l'effetto percepito è che salta da un canale all'altro in modo casuale.
- terzo problema è che la numerazione è assurda, faccio prima la scansione terrestre a cui vengono assegnati i canali a partire da 1000, poi quella satellitare che finiscono in 4000. Per fortuna l'ordine è decente, in 1001, 1002, 1003 ... 1051 mi trovo quello che normalmente in Italia trovo in 1, 2, 3 ... 51, però non posso usare sù/giù nel telecomando (problema channel_number) e per ogni canale invece di una pressione ne devo fare quattro (per canali che ho usato per almeno 40 anni sempre come 1,2,3 ...), inoltre digitando i numeri per cambiare canale spesso mi compare il dialogo "applicazione bloccata: chiudi/attendi"

Per fortuna c'è l'esportazione/importazione dei canali come xml, la soluzione che ho trovato per il momento è: scaricare export xml, "ordinare" i canali per lcn, quindi rinumerare lcn e channel_number uguali 1:1 (in modo che il telecomando cambia correttamente) partendo da 1 (almeno i primi del digitale terrestre finiscono nella posizione giusta).

Altri problemi minori:
- l'applicazione dvb riparte sempre dal canale 1 e non dall'ultimo usato (ma ho letto che sarà fixato nel prossimo firmware)
- spesso quando accendo il box e cambio ingresso hdmi sulla tv lo schermo rimane nero, devo cambiare porta hdmi e poi tornare su quella del box (magari funziona anche spegnendo e riaccendendo la tv non ho provato). Mi sembra un problema di tempistica hdmi, magari usando sempre quella uscita hdmi e il box il problema sparisce, ma fino ad ora per via dell problema della numerazione dei canali non ho potuto, la tv è usata anche da una persona anziana che ha difficoltà con numerazioni strane.

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: GT COMBO feedback, problema numeri canali, e un paio di problemi minori

Post by Feralkiwi »

The channels numbering from 1000 is due to LCN being on.
Try with LCN in the DVT menu "OFF"

The start on channel one is known and is due for a fix in the next software update.

The HDMI.
I find if I power on my TV late this problem happens.
Pressing OK twice seems to clear mine and make the two units talk and set up HDMI.

The PG up down buttons are a Page not a program.
Use the up and down arrows by the OK button.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

xandr271
Posts: 6
Joined: Sun Mar 13, 2022 11:21 pm

Re: GT COMBO feedback, problema numeri canali, e un paio di problemi minori

Post by xandr271 »

Grazie Owen,
Feralkiwi wrote:
Mon Mar 14, 2022 2:19 am
The channels numbering from 1000 is due to LCN being on.
Try with LCN in the DVT menu "OFF"
Non vedo opzioni LCN nel menu DVT, sto guardando il menu sbagliato?
photo_2022-03-14_19-25-35.jpg
photo_2022-03-14_19-25-35.jpg (102.33 KiB) Viewed 2152 times
Feralkiwi wrote:
Mon Mar 14, 2022 2:19 am
The start on channel one is known and is due for a fix in the next software update.
Ottimo a sapersi grazie, looking forward to the next update.
Feralkiwi wrote:
Mon Mar 14, 2022 2:19 am
The HDMI.
I find if I power on my TV late this problem happens.
Pressing OK twice seems to clear mine and make the two units talk and set up HDMI.
Doppio OK sembrerebbe funzionare anche con la mia tv ma ho potuto provarlo solo una volta, farò qualche altra prova, grazie per il suggerimento.
Rimane un "problema" perché mi costringe a usare il telecomando della tv, ma se funziona spegnendo/accendendo la tv potrebbe essere abbastanza comodo (tutti questi workaround non sono un gran problema per me, ma per persone con una certa età sì)
Feralkiwi wrote:
Mon Mar 14, 2022 2:19 am
The PG up down buttons are a Page not a program.
Use the up and down arrows by the OK button.
Non sto usando il tasto PG, ho notato che salta più canali, sto usando le frecce su/giù, e confermo che nelle prove che ho fatto mi sembra usare l'ordine interno (channel_number) e non lcn (quello visualizzato), dando l'impressione che cambia canale casualmente.

A proposito del tasto PG, per ragioni di abitudine di anni, suggerirei se possibile di aggiungere un opzione, per poterlo *utilizzare come CH+1/CH-1. Magari invertire CH+1 con PG+1 e CH-1 con PG-1, in modo da avere comunque entrambe le funzioni.

STRETCH
Posts: 3641
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: GT COMBO feedback, problema numeri canali, e un paio di problemi minori

Post by STRETCH »

For turning LCN (on/off), should be Menu - TV Setting -Turn LCN.

Den

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: GT COMBO feedback, problema numeri canali, e un paio di problemi minori

Post by Feralkiwi »

I had not noticed the the only LCN function is the Italian LCN scan.

GT Media Please add LCN ON / OFF function to the DVB app.

You can program the buttons at the top as a power on off for your TV.
There are learning instructions here.
(V8 series)How to copy remote buttons2019.1.23.zip
You can learn any IR remote command on any button.
If I remember the GT Combo remote needs to be unpaired in the android menus to "Learn".
After it has learnt only three buttons will work in paired mode, power, v+ and V-.

There is the .xml editor that works at present. The editor need to be fixed after they added more entries in the .xml file in the last update.
You could use the .xml editor to remove the LNC numbers, so the Combo does not use them.
After scanning the satellite again these would be restored.
Removing those should stop the channel change based on the LCN.
If you like you could attach here, or by email, a copy of your user DB and I would look at it for you.
If you would like to do it by email, I will now PM you my email.
This must be something with the Italian LCN as there was this post on LCN order, but with the V8 units.

I would think GT Media is due to release a new version of software soon for this GT Combo.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: GT COMBO feedback, problema numeri canali, e un paio di problemi minori

Post by Feralkiwi »

I now know exactly what you see!!!

While I was looking for the LCN ON OFF menu I had clicked on Italian LCN scan.
It did not offer any further menus and started a scan.
I clicked exit, but the damage was done.

My channel numbers are a mess!!!
In the list the channel number shown is for when you scanned it, the oldest scanned channel has the highest number.
As you click up channel you see the channel number the unit thinks you should see for Italian LCN.

I did think there was no way to recover this.
But as STRETCH said the LCN option is in Menu / TV Settings, top of the list.
I missed this when I lookled through for the LCN.

Edited again:
If you do set LCN to ON (or press ok on Italian LCN Search) and then set LCN back to OFF, your favorites lists will still be a mess, but the numbers will go back to normal.
The channels will be in a different order.

Owen

Edited after I found LCN with help from STRETCH and xandr271
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

xandr271
Posts: 6
Joined: Sun Mar 13, 2022 11:21 pm

Re: GT COMBO feedback, problema numeri canali, e un paio di problemi minori

Post by xandr271 »

STRETCH wrote:
Mon Mar 14, 2022 8:06 pm
For turning LCN (on/off), should be Menu - TV Setting -Turn LCN.

Den
Grazie Den!
Trovata, funziona, ora mi lascia spostare i canali del terrestre, devo fare qualche prova per vedere come si comporta con il telecomando.

xandr271
Posts: 6
Joined: Sun Mar 13, 2022 11:21 pm

Re: GT COMBO feedback, problema numeri canali, e un paio di problemi minori

Post by xandr271 »

Feralkiwi wrote:
Mon Mar 14, 2022 8:16 pm
I had not noticed the the only LCN function is the Italian LCN scan.

GT Media Please add LCN ON / OFF function to the DVB app.
Ho trovato LCN ON/OFF nel menu Tv Settings come suggerito da Den, è la prima voce in alto ed era parzialmente fuori quadro mi è sfuggita, però temo che anche potendo riordinare i canali terrestri non risolvo i problemi della numerazione.
Feralkiwi wrote:
Mon Mar 14, 2022 8:16 pm
You can program the buttons at the top as a power on off for your TV.
There are learning instructions here.
(V8 series)How to copy remote buttons2019.1.23.zip
You can learn any IR remote command on any button.
If I remember the GT Combo remote needs to be unpaired in the android menus to "Learn".
After it has learnt only three buttons will work in paired mode, power, v+ and V-.
Grazie Owen, i tasti della tv sono riuscito a configurarli tutti con un paio di tentativi. Quello che intendevo è che nella applicazione DVB sarebbe comodo avere un opzione per cambiare il comportamento di PG+1 PG-1 in canale+1 canale-1, per una semplice questione di abitudine, in tutti i telecomandi che ho usato da anni, quello che nel vostro (GTMEDIA) telecomando è page+1 page-1, negli altri è program+1 program-1.
Feralkiwi wrote:
Mon Mar 14, 2022 8:16 pm
There is the .xml editor that works at present. The editor need to be fixed after they added more entries in the .xml file in the last update.
You could use the .xml editor to remove the LNC numbers, so the Combo does not use them.
After scanning the satellite again these would be restored.
Removing those should stop the channel change based on the LCN.
If you like you could attach here, or by email, a copy of your user DB and I would look at it for you.
If you would like to do it by email, I will now PM you my email.
This must be something with the Italian LCN as there was this post on LCN order, but with the V8 units.

I would think GT Media is due to release a new version of software soon for this GT Combo.
Grazie per il supporto, scarico l'editor e lo provo, per ora sembra che la soluzione che avevo trovato di ordinare per lcn e rinumerare stia funzionando decentemente (ho creato questo per riordinarli: https://svelte.dev/repl/be7e0dfcadcd45f ... ion=3.46.4, ma è ancora WIP, dovrò aggiungere un modo per ordinarli comodamente a mano)

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: GT COMBO feedback, problema numeri canali, e un paio di problemi minori

Post by Feralkiwi »

Thanks I will look at that TV settings menu.

I tried clearing the user data, that did not turn off the LCN
I loaded another user DB file, that did not clear the LCN.

I did a factory reset of the android system and started again.

Yes I see the usefulness of the page up down being a program up down as most remotes are.
GT Media please can you consider add an option to change the function of the up down Page buttons so a user can change a menu option to make them up down program like other remotes are.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

User avatar
Tom.w
网站管理员
Posts: 1786
Joined: Mon Jul 27, 2020 3:58 am

Re: GT COMBO feedback, problema numeri canali, e un paio di problemi minori

Post by Tom.w »

Grazie mille per il tuo feedback sul test.
Riguardo all'opzione lcn, dovrebbe essere più ragionevole configurarla nel menu di installazione.
sulla funzione "Scansione lcn Italia", quando la selezioni, eseguirà la ricerca dei canali tramite lcn su di default, e puoi trovare l'elenco dei canali come hxxps://canalisat.altervista.org/tivusat.php, è una speciale funzione di scansione veloce solo per l'elenco dei canali tivusat.
sulla Pagina+/- o CH+/-, confermeremo la necessità di aggiungere questa funzione

Thank you very much for your test feedback.
About the lcn option,It should be more reasonable to configure it on the installation menu.
about the "Italy lcn scan" function, when you select it, it will do search channels by lcn on as default,and you can find out the channel list the same as hxxps://canalisat.altervista.org/tivusat.php,it is a special fast scan function only for tivusat channel list.
about the Page+/- or CH+/-,we will confirm the necessity of adding this feature

User avatar
Tom.w
网站管理员
Posts: 1786
Joined: Mon Jul 27, 2020 3:58 am

Re: GT COMBO feedback, problema numeri canali, e un paio di problemi minori

Post by Tom.w »

Feralkiwi wrote:
Tue Mar 15, 2022 3:32 am
Thanks I will look at that TV settings menu.

I tried clearing the user data, that did not turn off the LCN
I loaded another user DB file, that did not clear the LCN.

I did a factory reset of the android system and started again.

Yes I see the usefulness of the page up down being a program up down as most remotes are.
GT Media please can you consider add an option to change the function of the up down Page buttons so a user can change a menu option to make them up down program like other remotes are.

Owen
hello owen
please send your database xml to me, i will check the italy lcn function issue.

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: GT COMBO feedback, problema numeri canali, e un paio di problemi minori

Post by Feralkiwi »

Tom.w wrote:
Tue Mar 15, 2022 8:08 am
hello owen
please send your database xml to me, i will check the italy lcn function issue.
Yes I will email you my .xml

I sent one by email to 孙李宁 <sw03@ yesterday along with a register dump.

I did find the LCN menu, but if I have clicked on the Italian LCN Search and then turn off LCN in the menu the favorites lists are still a mess.
I expected to find the LCN menu option in the DVB-T menu, so missed it in the TV Settings menu.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

xandr271
Posts: 6
Joined: Sun Mar 13, 2022 11:21 pm

Re: GT COMBO feedback, problema numeri canali, e un paio di problemi minori

Post by xandr271 »

Ora che utilizziamo il box più spesso e per lungo tempo sto notando un problema con il wifi, mi è già capitato due volte in giorni diversi che passando alla applicazione youtube il wifi non risulta acceso e non funziona neanche riprovando, andando nella gestione delle reti non ne trova nessuna, riprende a funzionare normalmente solo dopo aver riavviato il box.

Tra le altre, l'opzione per riavviare è un po scomoda: settings -> impostazioni -> informazioni -> riavvia -> sì/no ... esiste qualche shortcut/hotkey?

Grazie

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: GT COMBO feedback, problema numeri canali, e un paio di problemi minori

Post by Feralkiwi »

xandr271 wrote:
Sun Mar 20, 2022 3:19 pm
Ora che utilizziamo il box più spesso e per lungo tempo sto notando un problema con il wifi, mi è già capitato due volte in giorni diversi che passando alla applicazione youtube il wifi non risulta acceso e non funziona neanche riprovando, andando nella gestione delle reti non ne trova nessuna, riprende a funzionare normalmente solo dopo aver riavviato il box.

Tra le altre, l'opzione per riavviare è un po scomoda: settings -> impostazioni -> informazioni -> riavvia -> sì/no ... esiste qualche shortcut/hotkey?

Grazie
If you press and hold the power on off key it will offer a list that has restart and screen shot.
Screen shot is saved in local memory and who knows how to get a picture from there?

I have found that if I import a user DB list the wifi say "saved" and I too needed to click on it to make it connect.
I fixed that by doing a forget and then select the wifi network again and enter the code.
Clicking the wifi on off button at the top of the network menu also restarts the wifi connection.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

xandr271
Posts: 6
Joined: Sun Mar 13, 2022 11:21 pm

Re: GT COMBO feedback, problema numeri canali, e un paio di problemi minori

Post by xandr271 »

Grazie Owen, il tasto per riavviare è abbastanza comodo.

Recentemente il box mi ha notificato un aggiornamento disponibile, l'ho aggiornato senza problemi (ho notato che ora memorizza l'ultimo canale, ho fatto poche prove ma mi sembra che memorizza il penultimo invece dell'ultimo...?)

Nelle ultime due settimane abbiamo iniziato ad utilizzarlo per diverse ore durante la giornata e ho notato qualche problema che vi segnalo:

- un problema abbastanza fastidioso è che spesso, accendendo tv e box, il video occupa solo la parte in alto a sinistra dello schermo (meno di 1/4), il resto dello schermo è nero, per farlo tornare normale devo uscire dall'applicazione DVB e tornare al menu principale, quindi tornare in DVB (cambiando solo canale non risolve).

- lasciandolo acceso per diverse ore sullo stesso canale audio e video vanno in desync, per risolvere devo cambiare canale e tornare a quello che stavo guardando.

- raramente, mi è capitato solo un paio di volte, accendendo box e tv il video non compare proprio, schermo nero (non ricordo se mi è bastato tornare al menu o se ho dovuto riavviare).

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: GT COMBO feedback, problema numeri canali, e un paio di problemi minori

Post by Feralkiwi »

I too have had the small picture on the TV.

This is due to the TV being turned on after the GT Combo looks to see what resolution the TV can take.

If you turn on the TV first it should work OK.
Maybe your TV has a setting that It turns on when it sees something on the HDMI cable and that is too late to set resolution with the GT Combo.
Look through the menu of your TV for a HDMI power on setting.

When that happened I pressed OK twice, bring the list up and the picture corrects.
Check your HDMI cable as well.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

Post Reply

Return to “Italia”