GT MEDIA V7 pro bloccato dopo aggiornamento

Paese italiano, discussione sul prodotto GTMEDIA

Moderators: admin, GTMedia Team

Billi73
Posts: 20
Joined: Fri Sep 02, 2022 4:14 pm

GT MEDIA V7 pro bloccato dopo aggiornamento

Post by Billi73 »

Salve! a tutti ho fatto qualche manovra sbagliata durante l'aggiornamento !
il decoder si accende ma rimane bloccato su una schermata di test e non riesco a fare altro , vi allego una foto Grazie!
Attachments
v7pro.jpg
v7pro.jpg (2.66 MiB) Viewed 3828 times

Delirium
Posts: 663
Joined: Sat Mar 02, 2019 6:39 am
Location: Italy

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by Delirium »

Vedi se riesci a risolvere con questa procedura

viewtopic.php?f=67&t=14431
GTX Combo - V8 UHD - GT combo - V8 Finder Pro - V7 Pro - V8X - V8 Turbo - X8 - X8 combo - V8 Pro 2 - D2 DAB+

Billi73
Posts: 20
Joined: Fri Sep 02, 2022 4:14 pm

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by Billi73 »

Grazie! ma ho gia provato questa procedura ma senza risolvere!

Delirium
Posts: 663
Joined: Sat Mar 02, 2019 6:39 am
Location: Italy

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by Delirium »

Ed allora devi fare quella hard, ma devi avere il cavo adatto

viewtopic.php?f=51&t=7535
GTX Combo - V8 UHD - GT combo - V8 Finder Pro - V7 Pro - V8X - V8 Turbo - X8 - X8 combo - V8 Pro 2 - D2 DAB+

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by Feralkiwi »

I see in your picture that your serial number is gone, xxxxxxx

There is this post on other boxes by Lining and note 4 at the bottom applies to your box.

You may need to contact GT Media / Lining with your serial number so they can make a recovery software version to recover your serial number.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

Billi73
Posts: 20
Joined: Fri Sep 02, 2022 4:14 pm

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by Billi73 »

Delirium wrote:
Fri Sep 02, 2022 5:00 pm
Ed allora devi fare quella hard, ma devi avere il cavo adatto

viewtopic.php?f=51&t=7535
il cavetto c'è l'ho ma la procedura non funziona!
percaso qualcuno sa che sigla ha la memoria flash US2,potrei provare con il programmatore di memorie!

Billi73
Posts: 20
Joined: Fri Sep 02, 2022 4:14 pm

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by Billi73 »

Billi73 wrote:
Sat Sep 03, 2022 9:31 am
Delirium wrote:
Fri Sep 02, 2022 5:00 pm
Ed allora devi fare quella hard, ma devi avere il cavo adatto

viewtopic.php?f=51&t=7535
il cavetto c'è l'ho ma la procedura non funziona!
percaso qualcuno sa che sigla ha la memoria flash US2,potrei provare con il programmatore di memorie!
Mi rispondo da solo,fatta la prova con il programmatore universale, ma il decoder rimane sempre con la stessa schermata! boh adsesso mando una mail con il numero di serie vediamo se si riesce a fare qualcosa

Billi73
Posts: 20
Joined: Fri Sep 02, 2022 4:14 pm

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by Billi73 »

Feralkiwi wrote:
Fri Sep 02, 2022 9:11 pm
I see in your picture that your serial number is gone, xxxxxxx

There is this post on other boxes by Lining and note 4 at the bottom applies to your box.

You may need to contact GT Media / Lining with your serial number so they can make a recovery software version to recover your serial number.

Owen
Non capisco come possa influire il numero di serie,e come sia possibile che dopo l'aggiornamento, fatto già altre volte sia successo questo .
Il decoder comunque fa il boot e poi rimane con questa schermata come mai?

User avatar
CAJE
网站管理员
Posts: 2262
Joined: Sun Dec 06, 2020 8:00 pm

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by CAJE »

Devi provare diverse versioni di firmware e rinominare una per una in flash.bin, verrà il momento in cui una funzionerà, con quattro tentativi di FW diverso di solito si ottiene

Billi73
Posts: 20
Joined: Fri Sep 02, 2022 4:14 pm

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by Billi73 »

CAJE wrote:
Sun Sep 04, 2022 11:44 am
Devi provare diverse versioni di firmware e rinominare una per una in flash.bin, verrà il momento in cui una funzionerà, con quattro tentativi di FW diverso di solito si ottiene


Ok! Ma bisogna mettere su una chiavetta USB il file bin e poi richiamare lo stesso file con il programma dal PC?

Billi73
Posts: 20
Joined: Fri Sep 02, 2022 4:14 pm

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by Billi73 »

OK! sono riuscito a far partire il programma, ora si connette con il decoder, ma rimane bloccato con una scritta "invalid boot" e non fa altro!
ho provato diverse versioni dalla 266 -275- 285-311 ma niente
Attachments
freesat.jpg
freesat.jpg (3.17 MiB) Viewed 3710 times

User avatar
CAJE
网站管理员
Posts: 2262
Joined: Sun Dec 06, 2020 8:00 pm

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by CAJE »

Billi73 wrote:
Sun Sep 04, 2022 5:27 pm
OK! sono riuscito a far partire il programma, ora si connette con il decoder, ma rimane bloccato con una scritta "invalid boot" e non fa altro!
ho provato diverse versioni dalla 266 -275- 285-311 ma niente
Il dispositivo USB in uso è difettoso

Billi73
Posts: 20
Joined: Fri Sep 02, 2022 4:14 pm

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by Billi73 »

CAJE wrote:
Sun Sep 04, 2022 6:50 pm
Billi73 wrote:
Sun Sep 04, 2022 5:27 pm
OK! sono riuscito a far partire il programma, ora si connette con il decoder, ma rimane bloccato con una scritta "invalid boot" e non fa altro!
ho provato diverse versioni dalla 266 -275- 285-311 ma niente
Il dispositivo USB in uso è difettoso
Ho cambiato chiavetta USB e ho completato il caricamento... Grazie!
Ma adesso ho un altro problema,il decoder funziona e si vede perfettamente per 1 Min poi si blocca l'immagine e anche se cambio canale rimane con la stessa immagine ...dopo spengo e accendo con il telecomando e riparte per poi bloccarsi di nuovo dopo 1 minuto esatto
Può essere un problema legato al numero di serie?
Attachments
20220904_201230.jpg
20220904_201230.jpg (2.94 MiB) Viewed 3691 times

User avatar
CAJE
网站管理员
Posts: 2262
Joined: Sun Dec 06, 2020 8:00 pm

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by CAJE »

Potrebbe provenire dall'adattatore WiFi, controlla la sua temperatura

Billi73
Posts: 20
Joined: Fri Sep 02, 2022 4:14 pm

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by Billi73 »

CAJE wrote:
Sun Sep 04, 2022 7:59 pm
Potrebbe provenire dall'adattatore WiFi, controlla la sua temperatura
Non uso il wifi! sto parlando di freez immagine dopo un 1 minuto esatto,e riguarda tutti i canali criptati e fta ! veramente strano come problema!

Billi73
Posts: 20
Joined: Fri Sep 02, 2022 4:14 pm

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by Billi73 »

Vi aggiorno la situazione! visto il difetto che faceva il decoder ho pensato di aggiornarlo via usb con una vecchia versione la 266, procedura andata a buon fine, ma quando il decoder si è riavviato e tornata la schermata del primo post e di nuovo punto e a capo!
Come posso risolvere?
@ lining ti allego la foto con il seriale
Attachments
seriale.jpg
seriale.jpg (2.62 MiB) Viewed 3644 times

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by Feralkiwi »

Billi73 wrote:
Sun Sep 04, 2022 10:51 am
Feralkiwi wrote:
Fri Sep 02, 2022 9:11 pm
I see in your picture that your serial number is gone, xxxxxxx

There is this post on other boxes by Lining and note 4 at the bottom applies to your box.

You may need to contact GT Media / Lining with your serial number so they can make a recovery software version to recover your serial number.

Owen
Non capisco come possa influire il numero di serie,e come sia possibile che dopo l'aggiornamento, fatto già altre volte sia successo questo .
Il decoder comunque fa il boot e poi rimane con questa schermata come mai?
It does look like your unit has forgotten its serial number in its memory.
Maybe some crash of the software over wrote that memory location.

Yes the fail after one minute does look like the serial number issue.

I will PM Lining as well with reference to this topic.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

User avatar
Lining
网站管理员
Posts: 1169
Joined: Thu Aug 11, 2016 11:14 am

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by Lining »

Billi73 wrote:
Fri Sep 02, 2022 4:22 pm
Salve! a tutti ho fatto qualche manovra sbagliata durante l'aggiornamento !
il decoder si accende ma rimane bloccato su una schermata di test e non riesco a fare altro , vi allego una foto Grazie!
Your machine is currently in that state. You press the info button twice on the factory interface, and you will enter the upgrade interface. Take a look and I will contact you by private message.
FREESAT brand change GT MEDlA

Billi73
Posts: 20
Joined: Fri Sep 02, 2022 4:14 pm

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by Billi73 »

Lining wrote:
Tue Sep 06, 2022 10:07 am
Billi73 wrote:
Fri Sep 02, 2022 4:22 pm
Salve! a tutti ho fatto qualche manovra sbagliata durante l'aggiornamento !
il decoder si accende ma rimane bloccato su una schermata di test e non riesco a fare altro , vi allego una foto Grazie!
Your machine is currently in that state. You press the info button twice on the factory interface, and you will enter the upgrade interface. Take a look and I will contact you by private message.
Provato a preme due volte info ma non succede nulla...
Come faccio a ripristinare il numero seriale?

STRETCH
Posts: 3641
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by STRETCH »

Have you checked your (pm's), Lining said he would contact you.

Den

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by Feralkiwi »

If you are seeing this picture, the factory interface, that is when you should press info twice as Lining asked.
I see also that there is a "Reset" button on that screen. Try moving to that button and click OK as well.

I may be that you need a software version from Lining to restore your serial number.

Owen
.
.
Image
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

User avatar
Lining
网站管理员
Posts: 1169
Joined: Thu Aug 11, 2016 11:14 am

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by Lining »

Billi73 wrote:
Fri Sep 02, 2022 4:22 pm
Salve! a tutti ho fatto qualche manovra sbagliata durante l'aggiornamento !
il decoder si accende ma rimane bloccato su una schermata di test e non riesco a fare altro , vi allego una foto Grazie!
1. You are in the factory interface, how to exit to the user interface?
2. Press blue and yellow 80 in the factory interface to upgrade the latest version or other versions.
FREESAT brand change GT MEDlA

Lulli2
Posts: 10
Joined: Mon Oct 12, 2020 7:17 pm

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by Lulli2 »

Ma che significa non va lo stesso.

Billi73
Posts: 20
Joined: Fri Sep 02, 2022 4:14 pm

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by Billi73 »

Aiutooo! non c'è nessuno che mi può aiutare a sistemare il decoder? lo devo proprio buttare?

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by Feralkiwi »

I think Lining says to press blue and yellow and 80 to load new software
2. Press blue and yellow 80 in the factory interface to upgrade the latest version or other versions.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

Post Reply

Return to “Italia”