GT MEDIA V7 pro bloccato dopo aggiornamento

Paese italiano, discussione sul prodotto GTMEDIA

Moderators: admin, GTMedia Team

Billi73
Posts: 20
Joined: Fri Sep 02, 2022 4:14 pm

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by Billi73 »

Feralkiwi wrote:
Sun Sep 25, 2022 8:48 pm
I think Lining says to press blue and yellow and 80 to load new software
2. Press blue and yellow 80 in the factory interface to upgrade the latest version or other versions.
Owen
A me serve rimettere a posto il serial number! il softwre sono riuscito a caricare tramite rs232, ma il decoder non funziona, si vede per un minuto e poi si blocca!

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by Feralkiwi »

Post here a picture of the screen with the serial number form the factory service page if you see that.

Also email or PM Lining on this issue.
They have made software to recover serial numbers for users like you.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

masc58
Posts: 5
Joined: Wed Oct 12, 2022 2:13 pm

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by masc58 »

Buon pomeriggio mi sono iscritto a questo forum perchè mi trovo in difficoltà con il mio decodere GT Media V7 Pro. Mi è successo che dopo un po di tempo che era spento, perche ho una tv hd e quindi lo tenevo di supporto nel caso cè ne fosse stato bisogno, dicevo appena acceso un prendeva l'imput del telecomando, a forza di sostituire pile e provare varie volte sono riuscito ad aggiornarlo al settembre 2022. dopo di chè non riesco più ad utilizzare il telecomando, mi sapete dire se c'è qualche cosa che posso fare oppure in alternativa darmi l'elenco dei centri di assistenza in talia grazie

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by Feralkiwi »

masc58 wrote:
Wed Oct 12, 2022 2:23 pm
Buon pomeriggio mi sono iscritto a questo forum perchè mi trovo in difficoltà con il mio decodere GT Media V7 Pro. Mi è successo che dopo un po di tempo che era spento, perche ho una tv hd e quindi lo tenevo di supporto nel caso cè ne fosse stato bisogno, dicevo appena acceso un prendeva l'imput del telecomando, a forza di sostituire pile e provare varie volte sono riuscito ad aggiornarlo al settembre 2022. dopo di chè non riesco più ad utilizzare il telecomando, mi sapete dire se c'è qualche cosa che posso fare oppure in alternativa darmi l'elenco dei centri di assistenza in talia grazie
Hi

You say you can not use the remote control?

When the unit powers on do you see the display show boot, load and then a channel number?
If all you see is a single green LED you will need to forced recovery your unit.

Do you see anything on your TV?

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

masc58
Posts: 5
Joined: Wed Oct 12, 2022 2:13 pm

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by masc58 »

sul display del decodere dopo il boot appare il numerodel canale mentre sulla tv vedo il canale ma da telecomando non riesco a fare niente ne cambiare canale ne accedere al menu.

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by Feralkiwi »

Have you tried using the remote very close to the unit?

Look at the remote through a digital camera, you should see the IR LED flashing when you press a button.

Is there another IR remote transmitting in the room? One with a button stuck down, blocking your GT Media remote.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

masc58
Posts: 5
Joined: Wed Oct 12, 2022 2:13 pm

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by masc58 »

si ho provato a vedere il telecomando con la telecamera del telefono e si vede lampeggiare il led ho il sospetto che il telecomando abbia un rapido consumo delle batterie e comunque anche con batterie nuove fatica a cambiare canale. Sai dirmi un eventuale telecomando di ricambio?

STRETCH
Posts: 3641
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by STRETCH »

Check out (Aliexpress).

Den

masc58
Posts: 5
Joined: Wed Oct 12, 2022 2:13 pm

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by masc58 »

ok l'ho messo in acquisto speriamo che i miei problomi siano dovuti al telecomando vi aggiornerò quando arriva

wlf
Posts: 331
Joined: Wed Oct 05, 2022 9:17 am

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by wlf »

masc58 wrote:
Tue Oct 18, 2022 7:48 am
ok l'ho messo in acquisto speriamo che i miei problomi siano dovuti al telecomando vi aggiornerò quando arriva
Che smartphone hai? Per caso non hai un modello che ha pure l'IR per provare con quello nel frattempo? :idea:

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by Feralkiwi »

masc58 wrote:
Fri Oct 14, 2022 3:03 pm
si ho provato a vedere il telecomando con la telecamera del telefono e si vede lampeggiare il led ho il sospetto che il telecomando abbia un rapido consumo delle batterie e comunque anche con batterie nuove fatica a cambiare canale. Sai dirmi un eventuale telecomando di ricambio?
Hi

You say the remote does work, but is difficult to use.

Does it work good if you are very close to the V7?

What is the difficulty your are having? Do you need to press the button many time? Is it that after pressing the button the wrong thing is done on the V7? Are all the buttons working?
Are the battery terminals corroded? Leaving old batteries in things can corrode the terminals if the batteries leaked.

As you had not used the V7 for some time, is there dirt or spider webs inside the V7 in front of the IR sensor?

Does the remote work better if your lights are off?
Some light bulbs emit IR.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

masc58
Posts: 5
Joined: Wed Oct 12, 2022 2:13 pm

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by masc58 »

Era chiaramente il telecomando perchè quando mi è arrivato quello nuovo ha funzionato tutto, quello che è strano che il primo telecomando all'inizio ha funzionato bene per cui al momento il problema è risolto. grazie a tutti

wlf
Posts: 331
Joined: Wed Oct 05, 2022 9:17 am

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by wlf »

Io sullo smartphone ho l'IR e dal programma che lo gestisce ho pure dei "Set-top box" tra i quali posso aggiungere Freesat ed il telecomando funziona con il ricevitore GTMedia! :D

In questo modo posso comandarlo sia dal suo telecomando che dallo smartphone; in questo modo è possibile discriminare se sia il telecomando ad avere problemi o meno. ;)

Gianluigi
Posts: 1
Joined: Sun Oct 30, 2022 10:33 am

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by Gianluigi »

Buongiorno ho un problema con il decoder v7pro accendo la tv e non vedo nulla neanche il menu del decoder cosa può essere.? Grazie a tutti

wlf
Posts: 331
Joined: Wed Oct 05, 2022 9:17 am

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by wlf »

Gianluigi wrote:
Sun Oct 30, 2022 10:41 am
ho un problema con il decoder v7pro accendo la tv e non vedo nulla neanche il menu del decoder cosa può essere.?
:o
Non voglio allarmarti, ma sembrerebbe che l'hai brikkato! :(
E' successo così improvvisamente oppure durante un aggiornamento andato a male?

Dall'immagine non vedo nessuna presa RS232:

Image

Dovresti provare ad aprirlo e vedere se sul PCB c'è uno zoccolo 3 pin maschio tipo questo sottostante:

Image

In caso affermativo fotografalo che poi seguono istruzioni. ;)

PS. Aggiungo foto nel frattempo sul da farsi per ripristinarlo:

Image

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by Feralkiwi »

Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

wlf
Posts: 331
Joined: Wed Oct 05, 2022 9:17 am

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by wlf »

Feralkiwi wrote:
Sun Oct 30, 2022 8:50 pm
First try a forced recovery.
Per il V9 Prime con Mars la procedura descritta, con il recovery forzato, non funziona! :cry:

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by Feralkiwi »

wlf wrote:
Mon Oct 31, 2022 12:02 am
Feralkiwi wrote:
Sun Oct 30, 2022 8:50 pm
First try a forced recovery.
Per il V9 Prime con Mars la procedura descritta, con il recovery forzato, non funziona! :cry:
Yes but I was replying to a forced recovery for a V7 Pro.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

wlf
Posts: 331
Joined: Wed Oct 05, 2022 9:17 am

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by wlf »

Feralkiwi wrote:
Mon Oct 31, 2022 7:48 pm
Yes but I was replying to a forced recovery for a V7 Pro.
Yes, I know, but is there a forced recovery for V9 Prime with Mars fw? Or is there only RS232 procedure?

Thank you, regards.

LucaVarlaro
Posts: 2
Joined: Mon Nov 07, 2022 4:10 am

Re: GT MEDIA V7 pro bloccato dopo aggiornamento

Post by LucaVarlaro »

Ciao, mi rendo conto che questo è un forum dedicato a GT Media, ma comunque sono già stato in grado di trovare qui alcune risposte alle mie domande su questo decoder. Quindi volevo solo chiedere se qualcuno può suggerirmi come ripristinare tutte le impostazioni dopo l'aggiornamento. Grazie in anticipo e mi scuso se il mio post è troppo inappropriato per questo forum

Post Reply

Return to “Italia”