Alimentazione antenna

Paese italiano, discussione sul prodotto GTMEDIA

Moderators: admin, GTMedia Team

Post Reply
faintofasia
Posts: 4
Joined: Thu Feb 23, 2023 9:04 am

Alimentazione antenna

Post by faintofasia »

Xchè nella ricerca canali non mantiene l opzione alimentazione antenna acceso, e da solo si rigira in spento????

User avatar
CAJE
网站管理员
Posts: 2293
Joined: Sun Dec 06, 2020 8:00 pm

Re: Alimentazione antenna

Post by CAJE »

faintofasia wrote:
Thu Feb 23, 2023 9:12 am
Xchè nella ricerca canali non mantiene l opzione alimentazione antenna acceso, e da solo si rigira in spento????
Devi fornire maggiori informazioni su quale modello V7 ti fornisce la disconnessione della tensione quando fai una ricerca alla cieca

faintofasia
Posts: 4
Joined: Thu Feb 23, 2023 9:04 am

Re: Alimentazione antenna

Post by faintofasia »

Il v7pro dv3t24s2combo.
Faccio la ricerca automatica nel digitale terrestre

faintofasia
Posts: 4
Joined: Thu Feb 23, 2023 9:04 am

Re: Alimentazione antenna

Post by faintofasia »

Il v7pro dv3t24s2combo.
Faccio la ricerca automatica nel digitale terrestre

User avatar
CAJE
网站管理员
Posts: 2293
Joined: Sun Dec 06, 2020 8:00 pm

Re: Alimentazione antenna

Post by CAJE »

Nel digitale terrestre la tensione è di 5V per antenne interne attive

faintofasia
Posts: 4
Joined: Thu Feb 23, 2023 9:04 am

Re: Alimentazione antenna

Post by faintofasia »

Non è x antenne interne attive! Ma antenna con relativi split sul tetto da alimentare. Comunque è funzionato fino 2 giorni fa, poi all improvviso non tiene più il settaggio. Premetto che i decoder, due sono, hanno 4 mesi

User avatar
CAJE
网站管理员
Posts: 2293
Joined: Sun Dec 06, 2020 8:00 pm

Re: Alimentazione antenna

Post by CAJE »

Avrai modificato qualcosa, ripartire da zero con i valori di fabbrica

User avatar
Feralkiwi
网站管理员
Posts: 8374
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Alimentazione antenna

Post by Feralkiwi »

You may have a short circuit or the maximum current needed on the roof and the over current is tripping when you do a search, as the processor in the V7 is very busy and the voltages in the unit drop, increasing the current needed for the antenna.

Try another power supply.
Some users have found that the 5.5mm power plug is the large center one on the power supply and the small center on the box, this also can cause voltage drop. Hold the power plug on a angle so the center makes better contact.

Check the antenna cable connections for loose wires.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

Post Reply

Return to “Italia”