Recuperacion V8X via RS232

Idioma español, discusión de productos GTMEDIA

Moderators: admin, GTMedia Team

Post Reply
pepebp65
Posts: 8
Joined: Sat Jul 30, 2022 5:58 pm

Recuperacion V8X via RS232

Post by pepebp65 »

despues de una mala actualizacion de mi V8X se me quedo en pantalla despues de la actualizacion NO CHANNELS , el mando no funciona , con el del V7 tampoco , si metes una USB te sala que has conectado una USB. Tengo el cable rs232(casero) lo conecto al TCOM.exe (no se configurarlo por el tema de la memoria ) le meto el firm GTMedia_V8X_Release_V319_20220519. me da error este es el log. alguna indicacion?
Search Port Cnt = 1!
Please reset the STB!
ÿ
MCPU: version:btinit VER 0.0.5_sym:[hg_] Build Time:[Jan 21 2021, 11:04:31]L$67777777V
DRAM: U92Z47B238
10123**CDU UDQ**: c651
[UTIL]execution failed, int_ret = -2139846324 !
[STO]M= 0xef, D=0x4017
[STO]U= 0xdf 0x60 0x38 0x58 0x8f 0x4d 0x18 0x33 !
Loader P-Ver = 118
P-Ver = 118
Loader M-Ver = 12352
M-Ver = 12352
Loader C-ID = 161
C-ID = 161
Loader F-Type= 39
F-Type = 39
R-Type = 211
RCU Addr = fc03
model = 1:GTMedia V8 X
date = Aug 11 2022
MT: _mt_fe_rs6060_dmd_get_reg ret=-8 demod_addr=0xd2 reg=0x00 FAILED!
MT: _mt_fe_rs6060_dmd_get_reg ret=-8 demod_addr=0xd2 reg=0x01 FAILED!
MT: _mt_fe_rs6060_dmd_get_reg ret=-8 demod_addr=0xd2 reg=0x02 FAILED!
MT: _mt_fe_rs6060_dmd_get_reg ret=-8 demod_addr=0xd2 reg=0xb2 FAILED!
ct8k
buff init: size = 0x038f4000, align = 0x00004000 !
EMON> hdmi_notify ok
[UTIL]start stb app...
[UTIL]load_bmp!!!!
&ehci->regs->port_status[0] bf070084
ehci->regs->port_status[0] 803
ehci_port_status: PORT_CONNECT
###step1.2### 2 usb_hcd_poll_rh_status


###step2###2 usb_hcd_poll_rh_status msgq 0 hcd->bus 80d9cc00


###step3### msg.event 2
&ehci->regs->port_status[0] bf070084
ehci->regs->port_status[0] 803
ehci_port_status: PORT_CONNECT
USB @2 start enumerate ports1000ffff
hub_add_new_dev 8125f320
port_reset 80d98700
&ehci->regs->port_status[0] bf070084
ehci->regs->port_status[0] 8000205
###step1.2### 0 usb_hcd_poll_rh_status
#3 usb_kill_urb
give reject sema cnt[0] sem 80c88008

Send Sem failure [4]!sem 81eec9e8
Check b data is wrong = e41c453b,0
device ADD cost 120 ts
abcde13:41:36-------------Time Stamp[13:41:36]------------
Search Port Cnt = 1!
Please reset the STB!
boot init error over 30s, please start again!!
boot init fail!
Please reset the STB!
boot init error over 30s, please start again!!
boot init fail!
Please reset the STB!
boot init error over 30s, please start again!!
boot init fail!
Please reset the STB!
boot init error over 30s, please start again!!
boot init fail!
Please reset the STB!
boot init error over 30s, please start again!!
boot init fail!
ÀPlease reset the STB!
boot init error over 30s, please start again!!
boot init fail!
Please reset the STB!

Delirium
Posts: 663
Joined: Sat Mar 02, 2019 6:39 am
Location: Italy

Re: Recuperacion V8X via RS232

Post by Delirium »

GTX Combo - V8 UHD - GT combo - V8 Finder Pro - V7 Pro - V8X - V8 Turbo - X8 - X8 combo - V8 Pro 2 - D2 DAB+

User avatar
cpr43
网站管理员
Posts: 7049
Joined: Thu Aug 11, 2016 1:41 pm

Re: Recuperacion V8X via RS232

Post by cpr43 »

Debes usar el REFRESH TOOL V2.2 en el link que Delirium ha provisto. NO uses el TCOM.

Primero has una copia del archivo GTMedia_V8X_Release_V319_20220519 y lo renombras a flash.bin y lo pones en tu USB. Instala el USB a la unidad. La unidad debe estar apagada.

Una vez abras el Refresh Tool V2.2 te debe decir si el puerto de COM esta trabajando y abierto. Añade el archivo del V8x V.319 en Select File y le das OK

En este momento enciende la unidad y deja que haga todo el proceso hasta que termine. Apaga la unidad, desconecta el cable RS232 y enciende la unidad

pepebp65
Posts: 8
Joined: Sat Jul 30, 2022 5:58 pm

Re: Recuperacion V8X via RS232

Post by pepebp65 »

gracias
este si funciona

tache13
Posts: 1
Joined: Fri Jan 19, 2024 6:35 pm

Re: Recuperacion V8X via RS232

Post by tache13 »

me puede manda el el lance de send upg v2.2 q no se donde descargarlo

User avatar
CAJE
网站管理员
Posts: 2262
Joined: Sun Dec 06, 2020 8:00 pm

Re: Recuperacion V8X via RS232

Post by CAJE »

tache13 wrote:
Mon Mar 11, 2024 11:08 am
me puede manda el el lance de send upg v2.2 q no se donde descargarlo
viewtopic.php?f=51&t=7535

Post Reply

Return to “España”