V8 UHD se reinicia BOOT al volver del standbay
Moderators: admin, GTMedia Team
V8 UHD se reinicia BOOT al volver del standbay
Buenos días. Tengo un V8 UHD con MARS con el firm 1.10.8734. Cuando apago del mando, en el display del aparato se ve la hora. Si le doy a encender, el deco hace BOOT y arranca. Pero no es un apagado-encendido normal. ¿Esto es así?
Re: V8 UHD se reinicia BOOT al volver del standbay
When you Press the RED button Top Right on the remote, you are putting the receiver into (Standby), which will also show the Red led light showing that power is still on the receiver.
When switching OFF with the switch on top of the receiver, the receiver has No Display.
Den
When switching OFF with the switch on top of the receiver, the receiver has No Display.
Den
Re: V8 UHD se reinicia BOOT al volver del standbay
Grancias por responder. Arriba a la derecha del mando remoto no hay ningún botón rojo. Hay uno con el logo rojo arriba a la izquierda. Pulso ese y el display del V8 UHD se queda en Standby con un led rojo. Cuando pulso el mismo botón para salir del standby, el receptor se reinicia.
Thanks for responding. There is no red button at the top right of the remote control. There is one with the red logo at the top left. I press that and the V8 UHD display stays in Standby with a red LED. When I press the same button to exit standby, the receiver reboots.
Iñaki.
Thanks for responding. There is no red button at the top right of the remote control. There is one with the red logo at the top left. I press that and the V8 UHD display stays in Standby with a red LED. When I press the same button to exit standby, the receiver reboots.
Iñaki.
Re: V8 UHD se reinicia BOOT al volver del standbay
Hola, eso es normal, BOOT en informática significa arranque, te está diciendo que el deco esta arrancando.
https://es.wikipedia.org/wiki/Arranque_ ... C3%A1tica)
Re: V8 UHD se reinicia BOOT al volver del standbay
No, no si ya sé de sobra lo que es un booting. Llevo más de 10 años con decos enigna y con firmwares propietarios. Pero ninguno de los más de 10 decos que he tenido, y más de 4 marcas diferentes actúa así.
Re: V8 UHD se reinicia BOOT al volver del standbay
No te conozco y no se lo que sabes, por eso te lo he dicho.
Gtmedia funciona así, tengo el v8x, el prime y el V8UHD y los tres hacen lo mismo.
Re: V8 UHD se reinicia BOOT al volver del standbay
Vale, entendido, gracias.