Ayuda: pantalla completamente en negro

Idioma español, discusión de productos GTMEDIA

Moderators: admin, GTMedia Team

Post Reply
edi_castillo
Posts: 4
Joined: Fri Nov 12, 2021 6:08 pm

Ayuda: pantalla completamente en negro

Post by edi_castillo »

Buenas tardes.
Acabo de comprarme un gtmedia v8x y, tras programar todo, meter las líneas y que funcionara todo perfectamente me dispuse a ir probando los diferentes botones del mando para familiarizarme con el mismo. De pronto, no recuerdo si toqué el "tv.mode" o el "s.mode" y se puso todo negro. El mando respondía iluminándose, al igual que la pantalla del decodificador, pero la imagen seguía completamente negra, como si se hubiera roto. ¿Alguien sabe qué podría ser? Muchas gracias de antemano.

Abanqueiro
Posts: 400
Joined: Wed Apr 18, 2018 4:12 pm
Location: España

Re: Ayuda: pantalla completamente en negro

Post by Abanqueiro »

Has cambiado la resolución por una que tu TV no soporta. Vuelve a pulsar smode
Last edited by Abanqueiro on Fri Nov 12, 2021 8:22 pm, edited 1 time in total.

edi_castillo
Posts: 4
Joined: Fri Nov 12, 2021 6:08 pm

Re: Ayuda: pantalla completamente en negro

Post by edi_castillo »

Sí, he probado nuevamente dando a ese botón y nada. Tampoco funciona en otros televisores que tengo por casa.
El aparato enciende correctamente, aparece lo de gtmedia al inicio pero después se queda negro y no se ve absolutamente nada

Abanqueiro
Posts: 400
Joined: Wed Apr 18, 2018 4:12 pm
Location: España

Re: Ayuda: pantalla completamente en negro

Post by Abanqueiro »

También cambia la resolución HDMI los botones v+ y v- (hasta que se configuren)

edi_castillo
Posts: 4
Joined: Fri Nov 12, 2021 6:08 pm

Re: Ayuda: pantalla completamente en negro

Post by edi_castillo »

Nada, ni por esas funciona. Muchas gracias de todas formas :)

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Ayuda: pantalla completamente en negro

Post by Feralkiwi »

Maybe try pressing the TV Mode button and power off / on your TV, then press the TV Mode button again and off on the TV so the TV looks at the new HDMI format.

They also did a green button function some time back, try that too.
Added fast key to switch video output mode or format.
we try to support some old TV or some signal mode TV
Press menu key to main menu.(Panel show "----")
press Green key to switch NTSC/PAL, the panel will show "PAL " or "NTSC"
Press Stop key to switch the video format
PAL mode : the panel will show "576I" -- "576P" -- "720P"(50HZ) --"1080I"(50HZ) --"1080P"(50HZ)
NTSC mode : the panel will show "480I" -- "480P" -- "720P"(60HZ) --"1080I"(60HZ) --"1080P"(60HZ)
There are many buttons on the remotes I do not want to press and the new GT Combo has more.
I now use a learning remote and only program the buttons I want.
Another option is to open the remote (use two thumb nails along the side) and put small bits of sticky tape over the circuit for the unwanted buttons.

Good luck

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

edi_castillo
Posts: 4
Joined: Fri Nov 12, 2021 6:08 pm

Re: Ayuda: pantalla completamente en negro

Post by edi_castillo »

Muchísimas gracias, tus consejos me han sido de ayuda y he podido arreglarlo.

Huguito16
Posts: 2
Joined: Sun Jul 30, 2023 3:18 pm

Re: Ayuda: pantalla completamente en negro

Post by Huguito16 »

Pues mi amigo no se porque pero toco la opción PAL y se le ha quedado todo en negro y no se ve nada, alguna sugerencia? Gracias

STRETCH
Posts: 3641
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: Ayuda: pantalla completamente en negro

Post by STRETCH »

@ Huguito16
You have hi-jacked three threads, all with the same question.
Have you tried with the TV only, to see if that has PAL on it, if it has, see if you can see the receiver, then change the receiver, then change the TV back to what it was.

Den

Post Reply

Return to “España”