GTMedia V8 UHD

[BerndE]

Hello,
my V8 UHD does not start the cccam on restart.
I always have to switch the lines, which are all on, off and on again. Then it works immediately.
Where do I have to switch on something else so that they start automatically? I never had this problem with the V9.
Thank you for an answer.

B

Firmware is V227

[Tom.w]

Hello,
my V8 UHD does not start the cccam on restart.
I always have to switch the lines, which are all on, off and on again. Then it works immediately.
Where do I have to switch on something else so that they start automatically? I never had this problem with the V9.
Thank you for an answer.

B

Firmware is V227

hello
what internet do you use? lan (dhcp or static ip)or wifi?
after restart the box,please wait some times,maybe 5min,then check it

[Dash12]

Hello,I have the same problem. V8UHD with 3G dongle.Firmware V227.

After every restart,I have to go to settings and changing network settings from =none= to =3G= and then in =Protocol= settings every
one CCCAM changing OFF and ON again.There is no problem with WIFI or LAN.The problem exist only with 3G dongle.
I think,the "network settings" can't remember the last time I used 3G and turn it on again. Please correct this with the next updates.

The same 3G dongle(Huawei E173) works without problems with my second decoder V8 Nova.One minute after turning on the decoder,
everything goes perfectly again.

[Feralkiwi]

Try setting all to work as you do and then export and re import your user file.
This often makes forgotten things get remembered.


Owen

[Dash12]

Try setting all to work as you do and then export and re import your user file.
This often makes forgotten things get remembered.


Owen

I tried this,but without success.Logically,if I want to export the settings,I must first remove the 3G USB dongle and insert the USB Flash.And then the settings I need are lost.
I believe that the programmers of GTmedia will fix the problem and V8 UHD will work without a problem with the 3G USB dongle,as in the earlier models of the company.

[Feralkiwi]

When you power of and the setting is lost, are you powering off with the remote or by removing the power?

If you are removing the power, try powering off / on with the remote to see if the settings are saved.

Owen

[Dash12]

The same in both cases. Does not remember the settings. Unfortunately it was not fixed in the last update V228_2021.08.19

[ghani Ajja]

Try setting all to work as you do and then export and re import your user file.
This often makes forgotten things get remembered.


Owen

Halo teman,
Saya telah mendatangkan kembali V8UHD karena V8UHD sebelumnya diambil teman saya disini.
Saya mengalami hal yang sama, dengan modem 3g (Huawei E173) pengaturan jaringan tidak tersimpan setelah saya mematikan V8UHD jadi harus memulai dari awal lagi biar terhubung ke jaringan internet dan autobiss tidak bekerja saat sudah terhubung ke jaringan internet saat menggunakan modem 3g (Huawei E173) berbeda apabila menggunakan wifi yaitu pengaturan dapat jaringan tersimpan dan autobiss pun bekerja dengan baik.
Firmware 227.

Salam.

[Tom.w]

hello

we will check this 3g dongle issue

[ghani Ajja]

hello

we will check this 3g dongle issue

Ok, Thank you very much
Best Regards

[Dash12]

hello

we will check this 3g dongle issue

Hello again.
I put Firmware V231 and tried with another 3G dongle - ALCATEL X220L. There is no difference. The same problem as I described in my above posts.