Could GTMedia by pass the seller, and ask for this (one) receiver to be returned, to be checked out in the factory.
Den
V8UHD Rebooting during Blind Scan
Moderators: admin, GTMedia Team
Re: V8UHD Rebooting during Blind Scan
Refresh by memory.
When you power on and it shows UP9 on the front panel, can you get any picture on any TV, AV output or HDMI?
Do you ever see any picture as it boots?
If it is in the UP9 screen it should look like this.
Note the yellow high lighted line will be the top line.
.
.
If you have only the UHD software .bin file on the main directory on your USB stick, all you need do is press down arrow twice and the OK to start the software recovery.
Owen
When you power on and it shows UP9 on the front panel, can you get any picture on any TV, AV output or HDMI?
Do you ever see any picture as it boots?
If it is in the UP9 screen it should look like this.
Note the yellow high lighted line will be the top line.
.
.
If you have only the UHD software .bin file on the main directory on your USB stick, all you need do is press down arrow twice and the OK to start the software recovery.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: V8UHD Rebooting during Blind Scan
thank you for your interest
I have seen all this ...
I have done it a thousand times !!!!
I do not have any picture on the TV.....ONLY BLACK SCREEN....
and all I see is the receiver staying on UP9
I also got a nool modem cable but the receiver did not receive the upgrade
if I had seen this picture then the receiver would work
my english is not so good (via google translation)
to put it very simply that I have done all these tricks to play but it does not work...UP9 ONLY
Is it my fault that the receiver suddenly stopped working? I just scanned a satellite
There is service here in the forum, but I do not see any company listening .....
WHY does the company not give me a solution?
Since it is under warranty, what do they expect?
Let a year pass (on October 20 last year I bought it) and then tell me to send it?
maybe if a year passes they do not replace the receiver?
Do they want me to pay for the courier?if i have to pay 50 euros i get a new one!!!!
here in my country if I had bought it they would have sent the courier and it would have reached me
I AM VERY VERY DISAPPOINTED
I have seen all this ...
I have done it a thousand times !!!!
I do not have any picture on the TV.....ONLY BLACK SCREEN....
and all I see is the receiver staying on UP9
I also got a nool modem cable but the receiver did not receive the upgrade
if I had seen this picture then the receiver would work
my english is not so good (via google translation)
to put it very simply that I have done all these tricks to play but it does not work...UP9 ONLY
Is it my fault that the receiver suddenly stopped working? I just scanned a satellite
There is service here in the forum, but I do not see any company listening .....
WHY does the company not give me a solution?
Since it is under warranty, what do they expect?
Let a year pass (on October 20 last year I bought it) and then tell me to send it?
maybe if a year passes they do not replace the receiver?
Do they want me to pay for the courier?if i have to pay 50 euros i get a new one!!!!
here in my country if I had bought it they would have sent the courier and it would have reached me
I AM VERY VERY DISAPPOINTED
Re: V8UHD Rebooting during Blind Scan
I am very sorry for the problem you encountered. If the software cannot be upgraded and restored, you can only contact your seller and return this device
Re: V8UHD Rebooting during Blind Scan
I contacted the seller but no answer !!via mail alliexpress
this is seller!!!!Shenzhen Huayue Technology Co.,Ltd
I contacted the company but no response
they do not care about me my friend
they are just kidding me
this is seller!!!!Shenzhen Huayue Technology Co.,Ltd
I contacted the company but no response
they do not care about me my friend
they are just kidding me
Re: V8UHD Rebooting during Blind Scan
pm Tom.w direct.
Den
Den
Re: V8UHD Rebooting during Blind Scan
please tell me your order number, i will try to contact the seller.
because we can only support the technical issues,if the box needs to take back to the factory, we must contact the seller.
Re: V8UHD Rebooting during Blind Scan
Re: V8UHD Rebooting during Blind Scan
after a month I have informed the seller his answer was
<<if hardware problem , you need send back repair
or buy new one>>
where will I send it?
who will pay for the transport did not answer me.....
I CAN'T BEAR TO BE MOCKED ANYMORE
<<if hardware problem , you need send back repair
or buy new one>>
where will I send it?
who will pay for the transport did not answer me.....
I CAN'T BEAR TO BE MOCKED ANYMORE