Hello
I purchased a GTMedia V7 Pro as it was advertised that it would cover the amateur TV repeater frequencies in the 70cm band 445.500mhz
I have connected this to a suitable antenna on the terrestrial port and have been unable to tune any signals
I have verified that there is a signal operating on this frequency but get no indication on the box that it is able to see a signal
I have updated the firmware to the latest and this has made no difference
Is there a different firmware that will enable this or does it just not work as advertised on EBay to these frequencies
Thanks
Ray
445.500mhz
Moderators: admin, GTMedia Team
Re: 445.500mhz
There are amateur TV transponders on a satellite at 25.5/8e (Es'Hail), are these the channels that you are after, if so you would need to connect your dish cable to the LNB input of the receiver.
Den
Den
Re: 445.500mhz
Hello Den
I do not have access to the satellite the same as you do in the UK, in Australia we are not in the footprint
I have trying to view the local repeater that transmits on 445.500mhz DVB-T but they receiver never find anything, I can see though the 1248mhz signal which is a DVB-S signal on the satellite port which is fine
This box was suppose to cover the 70cm band 420-450mhz which covers DVB-T 70cm in Australia, unless like the Strong SRT5434 has a firmware which can be update there box and receive 70cm signals
Regards
Ray
I do not have access to the satellite the same as you do in the UK, in Australia we are not in the footprint
I have trying to view the local repeater that transmits on 445.500mhz DVB-T but they receiver never find anything, I can see though the 1248mhz signal which is a DVB-S signal on the satellite port which is fine
This box was suppose to cover the 70cm band 420-450mhz which covers DVB-T 70cm in Australia, unless like the Strong SRT5434 has a firmware which can be update there box and receive 70cm signals
Regards
Ray
Re: 445.500mhz
@ Ray
Sorry i was not able to help you, at least someone has come forward to help you with your issue.
Den
Sorry i was not able to help you, at least someone has come forward to help you with your issue.
Den