A temporary solution, at least for me. I downloaded to usb flash from viewtopic.php?f=56&t=22716 GTCOMBO_v2.0_C20.A9.1.24_20230717.zip, I uploaded it to my box, deleting all the information. After I rescanned this and had a c-line inserted. A message appears every few hours that there is a new version, I refuse and ignore it and continue watching. It's annoying but it works for now.jiujicu wrote: ↑Wed Nov 15, 2023 7:13 amHi my receiver is BOX GTMEDIA GTCOMBO. My receiver automatically updated online by OTA successfully with the latest version GTCOMBO-C20.A9.1.26-202311080152-1699379522. After restarting the receiver, the DVB app crashes and says TVService keeps stopping. All satellites and channels have been deleted and the DVB app does not work. I tried the solution with empty the file http://YOUR_COMBO_IP:8081/files.html?file=oscam.server
save and restart the decoder and the TV Service Keeps Stopping message disappeared, but OSCAM does not work with an empty oscam.server file.
I reset the receiver to factory setting, but again any information in the oscam.server file causes the DVB app to crash and inability to watch channels and the use of OSCAM - and says TVService keeps stopping. I tried to install the latest version GTCOMBO-C20.A9.1.26-20231108 off line via USB by deleting everything during the installation and again after filling in information in the file oscam.server again causes the DVB app to crash and the inability to watch channels and the use of OSCAM -and says TVService keeps stopping. I am very disappointed. What is this receiver - decoder even for? Is there a solution to the problem or does the receiver go to waste and forget about you.
GTMEDIA_GT Series Bug Tracking System
Moderators: admin, nzl229, GTMedia Team
Re: GTMEDIA_GT Series Bug Tracking System
-
- Posts: 6
- Joined: Sun May 22, 2022 9:22 am
Re: GTMEDIA_GT Series Bug Tracking System
We want to separate DVB from Android and make DVB the main satellite system in gtmedia combo , so that the performance becomes better and there are no problems.
Because currently Android is the main system of the receiver and DVB is part of it
This allows other applications to run automatically in the background, causing the RAM to become full, creating instability, and possibly stopping work.
When the RAM is full, even the remote receives a delay in responding, and the channel signal is also delayed, and the image does not appear until after a while. The built-in oscam also stops on its own.
To be sure, every once in a while, go to the RAM, empty it, and delete the applications that are running. It will work like a rose. After a while, it comes back and the RAM is full, and so on. The same cycle returns, performance is delayed and a stop occurs.
Because currently Android is the main system of the receiver and DVB is part of it
This allows other applications to run automatically in the background, causing the RAM to become full, creating instability, and possibly stopping work.
When the RAM is full, even the remote receives a delay in responding, and the channel signal is also delayed, and the image does not appear until after a while. The built-in oscam also stops on its own.
To be sure, every once in a while, go to the RAM, empty it, and delete the applications that are running. It will work like a rose. After a while, it comes back and the RAM is full, and so on. The same cycle returns, performance is delayed and a stop occurs.
Re: GTMEDIA_GT Series Bug Tracking System
it needs 4gb of ram...that's the problem...google service consumes a lot of ramlordfayez1212 wrote: ↑Tue Nov 21, 2023 10:33 amWe want to separate DVB from Android and make DVB the main satellite system in gtmedia combo , so that the performance becomes better and there are no problems.
Because currently Android is the main system of the receiver and DVB is part of it
This allows other applications to run automatically in the background, causing the RAM to become full, creating instability, and possibly stopping work.
When the RAM is full, even the remote receives a delay in responding, and the channel signal is also delayed, and the image does not appear until after a while. The built-in oscam also stops on its own.
To be sure, every once in a while, go to the RAM, empty it, and delete the applications that are running. It will work like a rose. After a while, it comes back and the RAM is full, and so on. The same cycle returns, performance is delayed and a stop occurs.
Re: GTMEDIA_GT Series Bug Tracking System
Why some channels that are on a particular frequency sometimes even though the antenna signal and the quality are strong, but the image and sound do not open and to solve the problem by changing the channel that is on another frequency and returning to the previous channel, this problem must be resolved.
Re: GTMEDIA_GT Series Bug Tracking System
I have found this is caused by the video player looking for the video type before the DiSEqC switching is complete.Hamid88 wrote: ↑Wed Nov 22, 2023 4:27 amWhy some channels that are on a particular frequency sometimes even though the antenna signal and the quality are strong, but the image and sound do not open and to solve the problem by changing the channel that is on another frequency and returning to the previous channel, this problem must be resolved.
I changed my GT Combo to DiSEqC 1.0 only, no cascade switching with 1.1 as well, and the video opens a lot better.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: GTMEDIA_GT Series Bug Tracking System
So how am I supposed to do that?Feralkiwi wrote: ↑Wed Nov 22, 2023 4:33 amI have found this is caused by the video player looking for the video type before the DiSEqC switching is complete.Hamid88 wrote: ↑Wed Nov 22, 2023 4:27 amWhy some channels that are on a particular frequency sometimes even though the antenna signal and the quality are strong, but the image and sound do not open and to solve the problem by changing the channel that is on another frequency and returning to the previous channel, this problem must be resolved.
I changed my GT Combo to DiSEqC 1.0 only, no cascade switching with 1.1 as well, and the video opens a lot better.
Owen
Re: GTMEDIA_GT Series Bug Tracking System
If you do have DiSEqC 1.0 AND 1.0 cascade switching and can not change that, then you like me are stuck with changing channel to another TP on the same sat / polarity / frequency range to get the channel to work.
I was just listing why this happens.
I set up the channels I use in a favorites list and add a channel to change to, making it easier.
Owen
I was just listing why this happens.
I set up the channels I use in a favorites list and add a channel to change to, making it easier.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: GTMEDIA_GT Series Bug Tracking System
For what it is worth. After 11-17 update, box is not acting right at all. Even tried to reset to factory. Downloaded file to flash it with USB because the last update came down OTA. First the remote seems to of lost all contact unless you are right on top of the receiver. Then when it does make contact with the remote, it is extremely erratic. Very slow on any input with the remote. Channels I had before the update are black screen. Going to go back to older firmware flash to see if that helps. Not cascading switches or anything like that. Simple setup with a diseq-c mover box and a single 10 foot c-band dish located in the US. Also the box after shutting down went into a power cycle loop after about 5 minutes. Had to unplug the box. Just a report. Hopefully backing it up to older flash will fix it. Then figure out how to stop the online update nag after I back up.
My Best, Michael
My Best, Michael
Re: GTMEDIA_GT Series Bug Tracking System
Change the batteries in the remote.stone1150 wrote: ↑Thu Nov 23, 2023 11:56 pmFor what it is worth. After 11-17 update, box is not acting right at all. Even tried to reset to factory. Downloaded file to flash it with USB because the last update came down OTA. First the remote seems to of lost all contact unless you are right on top of the receiver. Then when it does make contact with the remote, it is extremely erratic. Very slow on any input with the remote. Channels I had before the update are black screen. Going to go back to older firmware flash to see if that helps. Not cascading switches or anything like that. Simple setup with a diseq-c mover box and a single 10 foot c-band dish located in the US. Also the box after shutting down went into a power cycle loop after about 5 minutes. Had to unplug the box. Just a report. Hopefully backing it up to older flash will fix it. Then figure out how to stop the online update nag after I back up.
My Best, Michael
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
- Posts: 10
- Joined: Sun Nov 05, 2023 4:20 pm
Re: GTMEDIA_GT Series Bug Tracking System
11-17 f.rmware TVService keeps stopping
Re: GTMEDIA_GT Series Bug Tracking System
Sky De is still down
Re: GTMEDIA_GT Series Bug Tracking System
Hello
I just bought a gtx combo
How can I transfer files to the device over the network?
It is very important to me
I just bought a gtx combo
How can I transfer files to the device over the network?
It is very important to me
-
- Posts: 3
- Joined: Thu Nov 30, 2023 11:36 pm
Re: GTMEDIA_GT Series Bug Tracking System
Hello. I just got a gtx device. I want to touch the color settings, but I can't find it. Please guide me
Re: GTMEDIA_GT Series Bug Tracking System
For your information.... I have been doing the satellite thing since 1985. I have checked the batteries and everything else. Batteries are full up. I also for your information test satellite equipment for another manufacturer. I bought this because it was advertised to do 4:2:2 which it does not. Now to update you on the status, I went back to the previous file and now have some functionality. That said, I am also only running one bird. Normally I have about 15 birds loaded on the C-band side and set to move my 10 foot dish. Any other suggestions than change the batteries my friend?Feralkiwi wrote: ↑Fri Nov 24, 2023 9:35 pmChange the batteries in the remote.stone1150 wrote: ↑Thu Nov 23, 2023 11:56 pmFor what it is worth. After 11-17 update, box is not acting right at all. Even tried to reset to factory. Downloaded file to flash it with USB because the last update came down OTA. First the remote seems to of lost all contact unless you are right on top of the receiver. Then when it does make contact with the remote, it is extremely erratic. Very slow on any input with the remote. Channels I had before the update are black screen. Going to go back to older firmware flash to see if that helps. Not cascading switches or anything like that. Simple setup with a diseq-c mover box and a single 10 foot c-band dish located in the US. Also the box after shutting down went into a power cycle loop after about 5 minutes. Had to unplug the box. Just a report. Hopefully backing it up to older flash will fix it. Then figure out how to stop the online update nag after I back up.
My Best, Michael
Owen
Re: GTMEDIA_GT Series Bug Tracking System
?In version 27, why does the channel list and channel logo load late? Does it have special settings or is it a new bug
-
- Posts: 10
- Joined: Sun Nov 05, 2023 4:20 pm
Re: GTMEDIA_GT Series Bug Tracking System
selam şuan cihazı kullanamıyorum cihaz uykuya daldı resmen. Tv system hatası veriyor ve bende başka cihaz yok. Yeni güncelleme ne zaman gelir yazılım versiyonu 11-17 .Cizahı severek almıştım ama gerçekten hayel kırıklığına uğradım
Hello, I cannot use the device right now. The device has literally gone to sleep. The TV system gives an error and I do not have any other device. When will the new update come? Software version 11-17. I bought it with pleasure but I was really disappointed.
Hello, I cannot use the device right now. The device has literally gone to sleep. The TV system gives an error and I do not have any other device. When will the new update come? Software version 11-17. I bought it with pleasure but I was really disappointed.
Re: GTMEDIA_GT Series Bug Tracking System
My advice to you is to replace this model as soon as possible because it is full of bugskaptan3888 wrote: ↑Mon Dec 04, 2023 10:09 pmselam şuan cihazı kullanamıyorum cihaz uykuya daldı resmen. Tv system hatası veriyor ve bende başka cihaz yok. Yeni güncelleme ne zaman gelir yazılım versiyonu 11-17 .Cizahı severek almıştım ama gerçekten hayel kırıklığına uğradım
Hello, I cannot use the device right now. The device has literally gone to sleep. The TV system gives an error and I do not have any other device. When will the new update come? Software version 11-17. I bought it with pleasure but I was really disappointed.
Re: GTMEDIA_GT Series Bug Tracking System
Hi,kaptan3888 wrote: ↑Mon Dec 04, 2023 10:09 pmselam şuan cihazı kullanamıyorum cihaz uykuya daldı resmen. Tv system hatası veriyor ve bende başka cihaz yok. Yeni güncelleme ne zaman gelir yazılım versiyonu 11-17 .Cizahı severek almıştım ama gerçekten hayel kırıklığına uğradım
Hello, I cannot use the device right now. The device has literally gone to sleep. The TV system gives an error and I do not have any other device. When will the new update come? Software version 11-17. I bought it with pleasure but I was really disappointed.
Fabrika ayarlarına dönüp baştan kurulum yaptınız mı? Bende hiç bir sıkıntı yok. Cihazım gtx combo.
Have you reset to factory settings and reinstalled? I have no problem. My device is gtx combo.
-
- Posts: 10
- Joined: Sun Nov 05, 2023 4:20 pm
Re: GTMEDIA_GT Series Bug Tracking System
I reset it to factory settings and there is no problem so far.
Re: GTMEDIA_GT Series Bug Tracking System
?From which source can I download GT Combo version 18 software
Re: GTMEDIA_GT Series Bug Tracking System
Check out xxxxxx, the software is there.
Den
Den
Re: GTMEDIA_GT Series Bug Tracking System
Because after version 19, the company took action for the new channel list of all programs after version 19, instead of fixing the bug, a new bug was added. I really wonder why the company does not take action to fix the bug, that is, the software engineers of this company really They do not have enough programming knowledge
Re: GTMEDIA_GT Series Bug Tracking System
Would you please share the previous version of software you are now using.stone1150 wrote: ↑Fri Dec 01, 2023 11:26 amFor your information.... I have been doing the satellite thing since 1985. I have checked the batteries and everything else. Batteries are full up. I also for your information test satellite equipment for another manufacturer. I bought this because it was advertised to do 4:2:2 which it does not. Now to update you on the status, I went back to the previous file and now have some functionality. That said, I am also only running one bird. Normally I have about 15 birds loaded on the C-band side and set to move my 10 foot dish. Any other suggestions than change the batteries my friend?Feralkiwi wrote: ↑Fri Nov 24, 2023 9:35 pmChange the batteries in the remote.stone1150 wrote: ↑Thu Nov 23, 2023 11:56 pmFor what it is worth. After 11-17 update, box is not acting right at all. Even tried to reset to factory. Downloaded file to flash it with USB because the last update came down OTA. First the remote seems to of lost all contact unless you are right on top of the receiver. Then when it does make contact with the remote, it is extremely erratic. Very slow on any input with the remote. Channels I had before the update are black screen. Going to go back to older firmware flash to see if that helps. Not cascading switches or anything like that. Simple setup with a diseq-c mover box and a single 10 foot c-band dish located in the US. Also the box after shutting down went into a power cycle loop after about 5 minutes. Had to unplug the box. Just a report. Hopefully backing it up to older flash will fix it. Then figure out how to stop the online update nag after I back up.
My Best, Michael
Owen
-
- Posts: 1
- Joined: Fri May 05, 2023 7:32 am
Re: GTMEDIA_GT Series Bug Tracking System
V8X Not work
Re: GTMEDIA_GT Series Bug Tracking System
Please explain, require more information.
Best to post in the correct section.
Den
Best to post in the correct section.
Den