V7hd hangs on L098 after downgrade
Moderators: admin, GTMedia Team
V7hd hangs on L098 after downgrade
It's new device. Gtmedia firmware was there.
Wifi worked well, cccam settings were correct, free channels were ok. But all another channels were crypted.
I decided to downgrade to firmware from my second box (there is decryption works well).
After furmware my box hangs on boot.
Wifi worked well, cccam settings were correct, free channels were ok. But all another channels were crypted.
I decided to downgrade to firmware from my second box (there is decryption works well).
After furmware my box hangs on boot.
- Attachments
-
- 1533931871942961985912.jpg (596.54 KiB) Viewed 4798 times
Re: V7hd hangs on L098 after downgrade
Reload with pressing menu during the boot doesn't help.(usb with file inserted).
'Freesat' picture on boot and black display , L098 on led display box.
'Freesat' picture on boot and black display , L098 on led display box.
Re: V7hd hangs on L098 after downgrade
To do a flash restore:
Place a copy of the software (Freesat_v7_hd.bin) on your USB stick and rename it "flash.bin".
With the usb in your V7, power on while repeat pressing "Menu" on the remote.
The unit should reload the software.
https://www.youtube.com/watch?v=e7Q8yrrlSSU
Place a copy of the software (Freesat_v7_hd.bin) on your USB stick and rename it "flash.bin".
With the usb in your V7, power on while repeat pressing "Menu" on the remote.
The unit should reload the software.
https://www.youtube.com/watch?v=e7Q8yrrlSSU
Re: V7hd hangs on L098 after downgrade
You need the new softcam.keyTemichL wrote:It's new device. Gtmedia firmware was there.
Wifi worked well, cccam settings were correct, free channels were ok. But all another channels were crypted.
I decided to downgrade to firmware from my second box (there is decryption works well).
After furmware my box hangs on boot.
Re: V7hd hangs on L098 after downgrade
Hello. I already tried this.cpr43 wrote:To do a flash restore:
Place a copy of the software (Freesat_v7_hd.bin) on your USB stick and rename it "flash.bin".
With the usb in your V7, power on while repeat pressing "Menu" on the remote.
The unit should reload the software.
https://www.youtube.com/watch?v=e7Q8yrrlSSU
On black display i see words 'usb upgrade!! 'Etc
But after reboot i see the same.
I configured cccam and mgcam keys before issues. Can it be cause? I hope no.
Last edited by TemichL on Sat Aug 11, 2018 6:20 am, edited 1 time in total.
Re: V7hd hangs on L098 after downgrade
How to do it? Where to get and how to put file inside?Sega wrote: You need the new softcam.key
Re: V7hd hangs on L098 after downgrade
Gt media teamTemichL wrote:How to do it? Where to get and how to put file inside?Sega wrote: You need the new softcam.key
Re: V7hd hangs on L098 after downgrade
Sorry. I didn't catch. How to change '.key' file with upgrade issues by usb during boot?
Re: V7hd hangs on L098 after downgrade
In any case i need to fix box first.
How to do this?
If there any prerequisuties for usb flash drive? I used 32gb and 64gb size. Microusb with cardreader.
No results. Still hang on 'L098'
Any suggestions?
How to do this?
If there any prerequisuties for usb flash drive? I used 32gb and 64gb size. Microusb with cardreader.
No results. Still hang on 'L098'
Any suggestions?
Re: V7hd hangs on L098 after downgrade
Try the flash.bin recovery using the software that was in the unit before you downgraded.
Remember that you need to use the V7 remote when pressing "Menu" for the flash.bin on the V7.
If this is working you should see "Upgrading, do not power off" on your TV.
Owen
Remember that you need to use the V7 remote when pressing "Menu" for the flash.bin on the V7.
If this is working you should see "Upgrading, do not power off" on your TV.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: V7hd hangs on L098 after downgrade
Yes.
I'm trying to upgrade.
I added file to microUSB flash drive - flash.bin. Inserted to USB port using microusb reader,
rebooted by power, pushed "Menu" some time.
Now I see the next:
LED - "UPG"
Display - "USB Upgrade. Do not Power off!!"
15 minutes already gone from start.
What's time for upgade take usually?
I'm trying to upgrade.
I added file to microUSB flash drive - flash.bin. Inserted to USB port using microusb reader,
rebooted by power, pushed "Menu" some time.
Now I see the next:
LED - "UPG"
Display - "USB Upgrade. Do not Power off!!"
15 minutes already gone from start.
What's time for upgade take usually?
Re: V7hd hangs on L098 after downgrade
WOW!!!
I Won!!
1 mistake was using Card reader. Looks like no every card reader supported.
2 mistake . Storage must be less 16GB( I used 64GB and 32GB)
So I upgraded from First try using Kingston USB Flash drive with 16GB size.
My friend has experience with different SAT devices so he told that many of devices work with Kingston less 16GB size ONLY!!!
Freesat upgraded, booted. Configs were restored from backup.
I'll check sat functionality today later.
I Won!!
1 mistake was using Card reader. Looks like no every card reader supported.
2 mistake . Storage must be less 16GB( I used 64GB and 32GB)
So I upgraded from First try using Kingston USB Flash drive with 16GB size.
My friend has experience with different SAT devices so he told that many of devices work with Kingston less 16GB size ONLY!!!
Freesat upgraded, booted. Configs were restored from backup.
I'll check sat functionality today later.