jjsportruiz wrote:nada no hay manera ademas cada vez que reinicio o apago me sale esa ventana y tengo. que dale a boton menu y despues de un video datle a boton inicio.. .. vaya cacharro 7 años con un engel y ni un fallo aun funcionando
GTC is about to release OTA version 6.2.41 to solve the problem of not being able to search for channels!
Moderators: admin, nzl229, GTMedia Team
-
- Posts: 12
- Joined: Fri Jan 04, 2019 8:54 pm
Re: GTC is about to release OTA version 6.2.41 to solve the problem of not being able to search for channels!
-
- Posts: 12
- Joined: Fri Jan 04, 2019 8:54 pm
Re: GTC is about to release OTA version 6.2.41 to solve the problem of not being able to search for channels!
buff pues yo nada de nada claro que no he realizado el. reset como tu me indicas. ya que siempre lo realizo desde ajustes de android.. tambien me sale esta pantalla cada vez que reinicio o enciendo el deco
- Attachments
-
- IMG_20190109_214436.jpg (1.63 MiB) Viewed 5208 times
-
- Posts: 10
- Joined: Mon Jan 07, 2019 9:19 pm
Re: GTC is about to release OTA version 6.2.41 to solve the problem of not being able to search for channels!
desde que version de firmware has actualizado a la 6.2.41? desde la anterior o has saltado versiones,es para que no nos pase a mas
Luego dice uno porque no actulizo si la version 40 me va mal...pues para que no vaya peor
Yo voy a intentar venderlo ,tengo 7 lineas que me queda medio año aun de subscripcion e irme a la competencia
Luego dice uno porque no actulizo si la version 40 me va mal...pues para que no vaya peor
Yo voy a intentar venderlo ,tengo 7 lineas que me queda medio año aun de subscripcion e irme a la competencia
-
- Posts: 10
- Joined: Mon Jan 07, 2019 9:19 pm
Re: GTC is about to release OTA version 6.2.41 to solve the problem of not being able to search for channels!
Totalmente de acuerdo Sylar,un apartado con todas actuaizaciones y parches en formato.zip o img para los mas ententidos.
Lo que no entiennicio y fdo es si hacen un parche para reparar lo del escaneo,o para el epg... luego fallan otra cosas,no entiendo nada de esto pero solo tocaran codigo de la parte afectada porque falla otras funciones como alguno pone gt player, o vuelve a marcar la misma hora de inicio y fin programa cuando en alguna actuaizacion lo arreglaron
Tengo lineas cccam y tengo servidor iptv pues he tenido que instalar iptv smarters que encima es mas completo porque el instalado no traga las direciones o no va
Igual podian cambiar a una base android 7 como lo hacen otras marcas con ese hardware
Lo que no entiennicio y fdo es si hacen un parche para reparar lo del escaneo,o para el epg... luego fallan otra cosas,no entiendo nada de esto pero solo tocaran codigo de la parte afectada porque falla otras funciones como alguno pone gt player, o vuelve a marcar la misma hora de inicio y fin programa cuando en alguna actuaizacion lo arreglaron
Tengo lineas cccam y tengo servidor iptv pues he tenido que instalar iptv smarters que encima es mas completo porque el instalado no traga las direciones o no va
Igual podian cambiar a una base android 7 como lo hacen otras marcas con ese hardware
Re: GTC is about to release OTA version 6.2.41 to solve the problem of not being able to search for channels!
sibita wrote:Timple me suena a mi tierraTimple wrote:Esperemos funcione bien,
Tambien es la mia, intentaremos sacarle brillo a las cuerdas....
-
- Posts: 12
- Joined: Fri Jan 04, 2019 8:54 pm
Re: GTC is about to release OTA version 6.2.41 to solve the problem of not being able to search for channels!
madre mia he intentado como 10 veces entrar en recovery y no lo consigo se me inicial normalmente. estoi desesperado no se que hacer
Re: GTC is about to release OTA version 6.2.41 to solve the problem of not being able to search for channels!
I am confused with the current version of firmware for GTC
I have the version C20.A6.3.40 and I have the info on screen that this version is the latest.
Is the version C20.A6.3.40 equal to C20.A6.2.41 or not ?
I got my GTC receiver on monday 07.01.2019 with software version as remember A6.2.37
I have read about problems with OTA version A6.2.40 so I decided to wait for the release OTA version 6.2.41.
On Wednesday 9.01.2018 I decided to do OTA update because I was convinced that I get version 6.2.41
But instead of that I got the version 6.3.40 ( not faulty as 6.2.40)
I have the version C20.A6.3.40 and I have the info on screen that this version is the latest.
Is the version C20.A6.3.40 equal to C20.A6.2.41 or not ?
I got my GTC receiver on monday 07.01.2019 with software version as remember A6.2.37
I have read about problems with OTA version A6.2.40 so I decided to wait for the release OTA version 6.2.41.
On Wednesday 9.01.2018 I decided to do OTA update because I was convinced that I get version 6.2.41
But instead of that I got the version 6.3.40 ( not faulty as 6.2.40)
- Attachments
-
- Screenshot_20190110-154926.png (81.03 KiB) Viewed 5045 times
Re: GTC is about to release OTA version 6.2.41 to solve the problem of not being able to search for channels!
I also purchased a GTC this year and they are now sending version 3 and I was told not to put a version 2 software on it as it would not work. My box came with 6.3.37 and I did not update to 3.40 because of all of the problems with 2.40. I am waiting to see how the new 6.x.41 is working before I update.... my 3.37 is working and for what I need it is OK. See here >> viewtopic.php?f=55&t=11540wikjan wrote:I am confused with the current version of firmware for GTC
I have the version C20.A6.3.40 and I have the info on screen that this version is the latest.
Is the version C20.A6.3.40 equal to C20.A6.2.41 or not ?
I got my GTC receiver on monday 07.01.2019 with software version as remember A6.2.37
I have read about problems with OTA version A6.2.40 so I decided to wait for the release OTA version 6.2.41.
On Wednesday 9.01.2018 I decided to do OTA update because I was convinced that I get version 6.2.41
But instead of that I got the version 6.3.40 ( not faulty as 6.2.40)
No live links (Rule #18) highlight the URL and use the Code tag option "</>"
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
-
- Posts: 12
- Joined: Fri Jan 04, 2019 8:54 pm
Re: GTC is about to release OTA version 6.2.41 to solve the problem of not being able to search for channels!
puff al final resuelto , me he bajado la version 2.32 he instalado desde usb y todo bien una vez iniciado se actulaiza poco a poco hasta la version 2.41 mediante ota..
Re: GTC is about to release OTA version 6.2.41 to solve the problem of not being able to search for channels!
A mi instalando desde la versión 6.2.39 hasta la 6.2.41 me pasa lo siguiente: estás viendo TV (DVB) y le doy por ejemplo al canal 4, ó a cualquier otro canal tecleándolo con el mando y cambia perfectamente. Sin embargo salgo a Home y con moverme simplemente a appstore, o a aplicaciones, ajustes, etc., en cuanto vuelvo a abrir la DVB, ya no cambia de canal al pulsar un número, me sale "invalid number".
¿Le pasa ésto a alguien más? .
Siempre tengo que volver a instalar localmente la 6.2.37 y con esa versión eso no me falla, sin embargo con ésta a veces al encenderlo desde modo reposo ó apagado completo, se vuelve loco y hay que apagar y encender para que funcione bien a la segunda o tercera vez.
¿Alguna solución?. Gracias, y un saludo.
¿Le pasa ésto a alguien más? .
Siempre tengo que volver a instalar localmente la 6.2.37 y con esa versión eso no me falla, sin embargo con ésta a veces al encenderlo desde modo reposo ó apagado completo, se vuelve loco y hay que apagar y encender para que funcione bien a la segunda o tercera vez.
¿Alguna solución?. Gracias, y un saludo.
Re: GTC is about to release OTA version 6.2.41 to solve the problem of not being able to search for channels!
-luckyem-
v.6.2.39---ok, v.2.3.41-does not switch channel by numbering
v.6.2.39---ok, v.2.3.41-does not switch channel by numbering
Re: GTC is about to release OTA version 6.2.41 to solve the problem of not being able to search for channels!
A mí me ocurre exactamente igual. Cuando salgo a Home, y entro en cualquier aplicacion, YouTube, Netflix, etc, y vuelvo a los canales de televisión, éstos ya no responde a los números del mando a distancia. Tengo que reiniciar la caja para que vuelva a la normalidad.
-
- Posts: 97
- Joined: Mon Jul 02, 2018 4:24 pm
- Location: Costa Rica
Re: GTC is about to release OTA version 6.2.41 to solve the problem of not being able to search for channels!
A mi me pasa desde versiones anteriores, lo que noté es que si abres el EPG te sale en el número de canal que fue escrito, apesar de que no se mostrara ni cambiara de canal. Una vez que esta en el menu EPG puedes presionar OK para cambiar de canal y luego presionar Exit, la aplicación no se cierra y todo vuelve a la normalidad.fpadilla wrote:A mí me ocurre exactamente igual. Cuando salgo a Home, y entro en cualquier aplicacion, YouTube, Netflix, etc, y vuelvo a los canales de televisión, éstos ya no responde a los números del mando a distancia. Tengo que reiniciar la caja para que vuelva a la normalidad.
Re: GTC is about to release OTA version 6.2.41 to solve the problem of not being able to search for channels!
is any firmware update we can expect? this latest firmware nothing good with it.. i preffer v2.39 more than this 2.41
Re: GTC is about to release OTA version 6.2.41 to solve the problem of not being able to search for channels!
I Bought a gtmedia gts and i get new update to install 6.2.40 and it is safe to update and can i get my dvbs2 stopped with this update or not
Last edited by bekimx on Fri Jan 18, 2019 6:10 pm, edited 1 time in total.
Re: GTC is about to release OTA version 6.2.41 to solve the problem of not being able to search for channels!
I have the version 6.3.40 and I can scan channels without any problems.
Previous version was as I remeber 6.3.37
The 6.3.40 seems a bit faster than .37 but is a bit less stable. There is a bug with chosing channels by number ( most often it gives invalid number error)
There is probably no major change ( timer recordings or Timeshift still don't work)
Previous version was as I remeber 6.3.37
The 6.3.40 seems a bit faster than .37 but is a bit less stable. There is a bug with chosing channels by number ( most often it gives invalid number error)
There is probably no major change ( timer recordings or Timeshift still don't work)
Re: GTC is about to release OTA version 6.2.41 to solve the problem of not being able to search for channels!
Hola a todos, queria preguntar si en esta actualización solo se ha corregido ese error o viene con mas correcciones y cuales son ya que a mi si me deja hacer la busqueda. Tambien queria preguntar si al actualizar se borra toda la configuracion que tengo porque la última actualización me hizo un borrado completo. un saludo.
Hello everyone, I wanted to ask if in this update only that error has been corrected or it comes with more corrections and what are they since I let me do the search. I also wanted to ask if updating will delete all the settings I have because the last update made a complete deletion. a greeting.
Hello everyone, I wanted to ask if in this update only that error has been corrected or it comes with more corrections and what are they since I let me do the search. I also wanted to ask if updating will delete all the settings I have because the last update made a complete deletion. a greeting.
Re: GTC is about to release OTA version 6.2.41 to solve the problem of not being able to search for channels!
thanks anyway i will wait for a new update for better stability
Re: GTC is about to release OTA version 6.2.41 to solve the problem of not being able to search for channels!
Anyone know how to remove chinesse screen at boot forever? I get that screen every boot...
Alguien sabe como quitar la pantalla que esta en chino cada vez que reinicio el aparato?
Alguien sabe como quitar la pantalla que esta en chino cada vez que reinicio el aparato?
Re: GTC is about to release OTA version 6.2.41 to solve the problem of not being able to search for channels!
SOLVEDCaym wrote:Anyone know how to remove chinesse screen at boot forever? I get that screen every boot...
Alguien sabe como quitar la pantalla que esta en chino cada vez que reinicio el aparato?
Re: GTC is about to release OTA version 6.2.41 to solve the problem of not being able to search for channels!
So is the version released yet or should we wait a bit longer ?
Re: GTC is about to release OTA version 6.2.41 to solve the problem of not being able to search for channels!
EspañolGtc@2018! wrote:Lining wrote:GTC is about to release OTA version 6.2.41 to solve the problem of not being able to search for channels!
GTC before Dispatch.... Why didn't you try the update v.2.40
Hola,
La ultima vez que actualice a 2.40 se me borro todo. "wipe" ¿sabemos si con esta actualizacion pasara lo mismo? Fue la primera vez que hice una actualizacion despues de tenerlo todo instalado y tengo miedo a que ocurra lo mismo.
Otra pregunta, ¿la 2.41 solo trae mejora del fallo de busqueda de canales o trae alguna mejora mas?
Gracias y un saludo.
English:
Hello,
The last time I updated to 2.40, everything was deleted. "wipe" do we know if the same thing will happen with this update? It was the first time I did an update after having everything installed and I'm afraid that the same thing will happen.
Another question, does 2.41 only bring improvement to the search failure of channels or does it bring some improvement?
Thanks and best regards
Re: GTC is about to release OTA version 6.2.41 to solve the problem of not being able to search for channels!
Boa tarde, sou do brasil alguem pode me dar uma força para procurar canais a cabo na minha região.
Re: GTC is about to release OTA version 6.2.41 to solve the problem of not being able to search for channels!
I am also having a problem after upgrade the firmware,my device not back to normal it shows a chinese character and a demo.
how to overcome the problem. need help ASAP
how to overcome the problem. need help ASAP