no signal
Moderators: admin, nzl229, GTMedia Team
no signal
1 Good yesterday I put my gtc updated last firmware.
I did a satellite search its all went well as correct lines ok.all the scroll over a while back to normal and after turning off the light came back to scroll. it will be normal strange. ???
I did a satellite search its all went well as correct lines ok.all the scroll over a while back to normal and after turning off the light came back to scroll. it will be normal strange. ???
Re: no signal
Please explain further?? No entiendo?mario56 wrote:1 Good yesterday I put my gtc updated last firmware.
I did a satellite search its all went well as correct lines ok.all the scroll over a while back to normal and after turning off the light came back to scroll. it will be normal strange. ???
Re: no signal
good .friend my gtc .no channels says no signal. I have last firmware.fiz search everything ok. it was okay to open channels.
but then says no signal ???? Thank you
but then says no signal ???? Thank you
Re: no signal
Try changing Diseqc 1.0 to Port #1 even if you do not have a diseqc switch and see if signal comes back?mario56 wrote:good .friend my gtc .no channels says no signal. I have last firmware.fiz search everything ok. it was okay to open channels.
but then says no signal ???? Thank you
Re: no signal
i had the same problem but i fix it
Re: no signal
Hi @cpr43.. I have 2 dish installed to my GTC, but the problem is, the box seems have problem switching diseqc port. when i watching channel from dish A and moving to channel from dish B.. signal will lost. and to fix this, i have to played a bit on the satellite configuration to get signal back.. any update soon to fix this.. this bug is kinda headche
Re: no signal
Have you try using a 22K switch and see if it works better?? One dish in Off and the other in ON? Maybe a workaround until they fix the no signal issue. Regardsdearde4n wrote:Hi @cpr43.. I have 2 dish installed to my GTC, but the problem is, the box seems have problem switching diseqc port. when i watching channel from dish A and moving to channel from dish B.. signal will lost. and to fix this, i have to played a bit on the satellite configuration to get signal back.. any update soon to fix this.. this bug is kinda headache
Re: no signal
it didnt solve the prob.. no signal on the configured dish when i switch off 22K switch.cpr43 wrote:Have you try using a 22K switch and see if it works better?? One dish in Off and the other in ON? Maybe a workaround until they fix the no signal issue. Regardsdearde4n wrote:Hi @cpr43.. I have 2 dish installed to my GTC, but the problem is, the box seems have problem switching diseqc port. when i watching channel from dish A and moving to channel from dish B.. signal will lost. and to fix this, i have to played a bit on the satellite configuration to get signal back.. any update soon to fix this.. this bug is kinda headache
Re: no signal
Why are you switching off the 22khz? You have 2 dish. One of the dish is set in one of the port of the 22khz swith and the other dish in the other port. In the menu antenna setting configuration you set the 22khz option ON for one of the dish and Off for the other one. (you can also let the diseqc 1.0 set to Port #1 even if you dont have a diseqc switch)dearde4n wrote:it didnt solve the prob.. no signal on the configured dish when i switch off 22K switch.cpr43 wrote:Have you try using a 22K switch and see if it works better?? One dish in Off and the other in ON? Maybe a workaround until they fix the no signal issue. Regardsdearde4n wrote:Hi @cpr43.. I have 2 dish installed to my GTC, but the problem is, the box seems have problem switching diseqc port. when i watching channel from dish A and moving to channel from dish B.. signal will lost. and to fix this, i have to played a bit on the satellite configuration to get signal back.. any update soon to fix this.. this bug is kinda headache
Re: no signal
that exactly what I did.. one dish i set 22K off and the other i set it ON. and the dish that i set OFF is no signal and i hev to set it ON or Auto to get signal back.cpr43 wrote:Why are you switching off the 22khz? You have 2 dish. One of the dish is set in one of the port of the 22khz swith and the other dish in the other port. In the menu antenna setting configuration you set the 22khz option ON for one of the dish and Off for the other one. (you can also let the diseqc 1.0 set to Port #1 even if you dont have a diseqc switch)dearde4n wrote:it didnt solve the prob.. no signal on the configured dish when i switch off 22K switch.cpr43 wrote:Have you try using a 22K switch and see if it works better?? One dish in Off and the other in ON? Maybe a workaround until they fix the no signal issue. Regardsdearde4n wrote:Hi @cpr43.. I have 2 dish installed to my GTC, but the problem is, the box seems have problem switching diseqc port. when i watching channel from dish A and moving to channel from dish B.. signal will lost. and to fix this, i have to played a bit on the satellite configuration to get signal back.. any update soon to fix this.. this bug is kinda headache
and not forget to request to the dev to update channel manager.. its too hard sort the channel.. its good to have multiple selection for moving channels instead of one by one, and also pls make it use "insert" method instead of "replace". thanx