I updated my box to GTC_OTA_C20.A6.2.46_20190604 and did a factory reset. Since I use a DiSEqC 1.0 switch, I set it to port 2 where my C-Band signal is connected. I scanned 113W several times before I was able to acquire any channels. My final scan was Scan Mode–Blind, Cryted-All, Accurate Scan-ON. I got FTA channels only and did not get any of the encrypted channels that I normally get on my Super 8 and Nova. I’m interested in getting the PowerVu channels on transponder 4140H such as Canal Once and Canal 22. In addition, I would like update my softcam to receive these channels. Your help will be appreciated.
Thanks, Hank
113W Blind Scan
Moderators: admin, nzl229, GTMedia Team
Re: 113W Blind Scan
Scan Mode: BlindScan
Crypted: All
Service Type: All
Accurate Scan (Off/On) as you wish
Yes
Try also, to choose Diseqc 1.0 port 1 even if you are connected to port 2 and test
Crypted: All
Service Type: All
Accurate Scan (Off/On) as you wish
Yes
Try also, to choose Diseqc 1.0 port 1 even if you are connected to port 2 and test
- msilver511
- Posts: 94
- Joined: Sat Jul 22, 2017 2:46 am
- Location: Los Angeles
Re: 113W Blind Scan
PM sent Good Luck!
Re: 113W Blind Scan
Thank you very much for sharing.
Hank
Re: 113W Blind Scan
I’ve scanned 113W numerous times using all available options and I’m still not getting any of the encrypted channels. Is anyone out there getting any of these channels? Will appreciate your feedback.
Thanks, Hank