V7S new firmware(13/06/2019) - problem
Moderators: admin, GTMedia Team
V7S new firmware(13/06/2019) - problem
Hi
Just updated my two v7s receivers to latest firmware (13/06/2019) and I am extremaly disapointed.
Both boxes are working onlY for 1-2 min and after that encription problem appear.
I have to change chanell to make it working again for another 1-2 min
I'm using box with Polish chanells (Hotbird 13E) on cccam.
Tried downgrade to GTMedia_V7S_Europe_UI_20181105 - impossible.
At the moment can't watch tv.
Why there is no warning that downgrade after upgrade will NOT be possible?
How can I downgrade firmware to old one?
Regards
Just updated my two v7s receivers to latest firmware (13/06/2019) and I am extremaly disapointed.
Both boxes are working onlY for 1-2 min and after that encription problem appear.
I have to change chanell to make it working again for another 1-2 min
I'm using box with Polish chanells (Hotbird 13E) on cccam.
Tried downgrade to GTMedia_V7S_Europe_UI_20181105 - impossible.
At the moment can't watch tv.
Why there is no warning that downgrade after upgrade will NOT be possible?
How can I downgrade firmware to old one?
Regards
Last edited by luiluigi on Mon Jun 24, 2019 11:04 pm, edited 1 time in total.
Re: V7S new firmware(13/06/2019) - problem
Did you try recovery?
Re: V7S new firmware(13/06/2019) - problem
Something is strange
09/04/2019 or 13/06/2019? Go here for latest
viewtopic.php?f=39&t=6025
Do a factory reset after upgrading
09/04/2019 or 13/06/2019? Go here for latest
viewtopic.php?f=39&t=6025
Do a factory reset after upgrading
Re: V7S new firmware(13/06/2019) - problem
Sorry (mistake in 1st post) updated to 13.06.19 and I did factory reset - still same
can't downgrade as well
can't downgrade as well
Re: V7S new firmware(13/06/2019) - problem
Put the 13.06.19 file in an USB. Rename the file to flash.bin. Load USB to box. Unplug the box. Plug back while at the same time pressing MENU in your remote control. You will see the upgrade process in the front. Wait until finished
-
- Posts: 7
- Joined: Tue Mar 26, 2019 2:14 pm
Re: V7S new firmware(13/06/2019) - problem
no meu não tou conseguindo importar a softcam.key
in my case I can not import the softcam.key
in my case I can not import the softcam.key
Re: V7S new firmware(13/06/2019) - problem
Make sure you save as over the original Softcam.key file.claudiney ribeiro wrote: ↑Tue Jun 25, 2019 1:42 pmno meu não tou conseguindo importar a softcam.key
in my case I can not import the softcam.key
Also, make sure it is name Softcam.key and not Softcam.key.key
-
- Posts: 7
- Joined: Tue Mar 26, 2019 2:14 pm
Re: V7S new firmware(13/06/2019) - problem
eu cloquei algumas chaves biss ele e depois exportar para usb na hora de voltar a chaves da falha como resolver isso
I clucked a few keys biss it and then export to usb at the time of returning the keys to the crash how to solve this
I clucked a few keys biss it and then export to usb at the time of returning the keys to the crash how to solve this
Re: V7S new firmware(13/06/2019) - problem
The unit will save the softcam file as "export_softcam.key"
You need to use a PC to rename it just "softcam.key" to reload it
Owen
You need to use a PC to rename it just "softcam.key" to reload it
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
- Posts: 7
- Joined: Tue Mar 26, 2019 2:14 pm
Re: V7S new firmware(13/06/2019) - problem
ja fiz isso também da falha ao importar softcam.key
I already made this also from the failure to import softcam.key
I already made this also from the failure to import softcam.key
-
- Posts: 78
- Joined: Sat Jan 27, 2018 6:00 pm
- Location: Bahia, Brasil
- Contact:
Re: V7S new firmware(13/06/2019) - problem
Quando joga para a Usb fica assim, export_softcam.key é só apagar export ou renomear deixando apenas softcam.
-
- Posts: 7
- Joined: Tue Mar 26, 2019 2:14 pm
Re: V7S new firmware(13/06/2019) - problem
bom dia amigos também não deu certo.também já voltei firmware mesmo Asim da falha
Good morning friends also did not work. I also came back firmware same Asim to fail
Good morning friends also did not work. I also came back firmware same Asim to fail
Re: V7S new firmware(13/06/2019) - problem
Olá Claudiney Ribeiro,acredito que haja alguma falha na sua inserção das chaves e como na importação porque se seguires bem a explicação do Cpr43 e Owen não falhará nada e será muito simples assim.Boa sorte amigo
-
- Posts: 7
- Joined: Tue Mar 26, 2019 2:14 pm
Re: V7S new firmware(13/06/2019) - problem
eu coloquei manualmente algumas chaves biss ai exportei para o usb.ai no pc renomeei para softcam.key.depois apaguei a do aparelho ai tentei importar a do pen drive que foi a q eu exportei do aparelho mesmo asim da falha agora vou tenta com outro pen drive pra ver
Re: V7S new firmware(13/06/2019) - problem
Boa noite amigo,realmente até ai está tudo correcto e agora tenta outra pen para veres qual será o resultado.Depois desta última atualização também deparei com um caso semelhante que foi a da box ficar no “load” só me safei-me depois de trocar da pen com muita insistência e seguir os passos dos colegas acima referidos.Boa sorte
Re: V7S new firmware(13/06/2019) - problem
you've already checked the antenna signal
-
- Posts: 7
- Joined: Tue Mar 26, 2019 2:14 pm
Re: V7S new firmware(13/06/2019) - problem
oi pessoal troquei o pen drive tambem da falha ao importar a softcam.key ja fiz tuto q os amigos me ensino. mais nada de da certo
Re: V7S new firmware(13/06/2019) - problem
Olá,opa se já experimentaste tudo alguma falha pode ainda existir,tenta fazer o factory setting mas antes fazes o backup de tudo numa pen para não perderes e tenta recomeçar tudo denovo.Boa sorte
Re: V7S new firmware(13/06/2019) - problem
i can't download the latest upgrade. When I hit the link nothing happens
Re: V7S new firmware(13/06/2019) - problem
Check your internet,before you can try it again.Good luck
Re: V7S new firmware(13/06/2019) - problem
Links are still working,ensure your internet service is working and also make sure your IP is not banned to access the site as well log in with your username to forge ahead.
GTMedia V7S HD new firmware
GTMedia V7S HD new firmware NEW software HELPPPPPPPPPPPPPPPP
Re: V7S new firmware(13/06/2019) - problem
Hello friend,just be patient.
Re: V7S new firmware(13/06/2019) - problem
is there an update for cable area instead of the terestrial
regards
regards
Re: V7S new firmware(13/06/2019) - problem
May I know software version