Tried this on a GTMedia V8Pro2.
It does not work for me
How to USB forced upgrade Freesat Box.
Moderators: admin, GTMedia Team
Re: How to USB forced upgrade Freesat Box.
For which firmware versions does this work?
Re: How to USB forced upgrade Freesat Box.
Rename the firmware to flash , put it on USB, load to your box. Turn unit ON while keep pressing MENU key in your Remote Control until you see upgrading message, wait until finished.
Re: How to USB forced upgrade Freesat Box.
I do all this.
Probably this message appears after the device is fully loaded firmware.
Now may device does not now fully boot.
Reaches message on screen "0003" then the device turns off.
I was hoping this option will help me solve the problem ...
Probably this message appears after the device is fully loaded firmware.
Now may device does not now fully boot.
Reaches message on screen "0003" then the device turns off.
I was hoping this option will help me solve the problem ...
Re: How to USB forced upgrade Freesat Box.
Do you see a message on the TV after you power on while repeat pressing the menu button that says "USB Upgade, Do not power off"
If you do not see this then the USB flash.bin is not working.
You need to use a fat32 USB less than 32Gb.
Use the .bin file from inside the .zip folder to rename as flash.bin.
Owen
If you do not see this then the USB flash.bin is not working.
You need to use a fat32 USB less than 32Gb.
Use the .bin file from inside the .zip folder to rename as flash.bin.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: How to USB forced upgrade Freesat Box.
Thank you very much.
I took another flash drive and it worked.
Refresh GTMedia V8 PRO2 successful
I took another flash drive and it worked.
Refresh GTMedia V8 PRO2 successful