BLIND SCAN STOPS on Hotbird 13E and SES7 108E
Moderators: admin, GTMedia Team
Re: BLIND SCAN STOPS on Hotbird 13E and SES7 108E
It's hard enough because
Since there is memory stored in the blind scan, sufficient capacity cannot be secured.
It is important to increase the memory capacity rather than F / W renovation.
Since there is memory stored in the blind scan, sufficient capacity cannot be secured.
It is important to increase the memory capacity rather than F / W renovation.
-
- Posts: 40
- Joined: Sat Jun 15, 2019 6:11 am
Re: BLIND SCAN STOPS on Hotbird 13E and SES7 108E
It is not a problem of Memory Capacity, because blind scan stops even you delete all channels and all satellite with all TP. I tried to scan 108e by deleting all other sats and channels, it hangs only on 150 channels. Only thing left is to handle duplicate values of V.PID and A.PID.
Re: BLIND SCAN STOPS on Hotbird 13E and SES7 108E
I too have this problem with my V8Pro2 on Intelsat19@166e.
It hangs on the VOA 17/ 18 radio channel.
An older copy of the same sat in the sat list that aready has all the channels in it will blind scan OK.
A new sat on the sat list hangs.
I think this is when a channel's data matches the end of file code in the Freesat user data file.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: BLIND SCAN STOPS on Hotbird 13E and SES7 108E
What I want to say is the temporary temporary storage in BlindScansaqibjameel wrote: ↑Thu Aug 29, 2019 6:56 amIt is not a problem of Memory Capacity, because blind scan stops even you delete all channels and all satellite with all TP. I tried to scan 108e by deleting all other sats and channels, it hangs only on 150 channels. Only thing left is to handle duplicate values of V.PID and A.PID.
Of capacity.
Therefore, deleting the current channel list has no effect.
The solution is to increase the amount of temporary storage memory used for ”BlindScan”.
If there is no overall memory capacity, this problem can not be solved with F / W.
The same VPID and APID are normal and there is no problem.
In this case, the service ID is always different.
Re: BLIND SCAN STOPS on Hotbird 13E and SES7 108E
Your problem is to save the channel from temporary storageFeralkiwi wrote: ↑Thu Aug 29, 2019 9:06 pmI too have this problem with my V8Pro2 on Intelsat19@166e.
It hangs on the VOA 17/ 18 radio channel.
An older copy of the same sat in the sat list that aready has all the channels in it will blind scan OK.
A new sat on the sat list hangs.
I think this is when a channel's data matches the end of file code in the Freesat user data file.
Owen
It seems to be a problem when swapped to memory.
Character length and unsupported characters
It is a phenomenon that can not be processed when found.
Anyway, I think that it can be corrected by F / W update.
-
- Posts: 40
- Joined: Sat Jun 15, 2019 6:11 am
Re: BLIND SCAN STOPS on Hotbird 13E and SES7 108E
Well blind scan is saving more than 1000 channels on NSS6 95E, Badr and Yaha Satellites on the same receiver (with same temporary memory for blind scan) and hanging on just 100 channels on SES7 108E and Hotbird 13e Satellites. Doesn't make any sense..... Lot of confusion...Xsat wrote: ↑Thu Aug 29, 2019 11:33 pmWhat I want to say is the temporary temporary storage in BlindScansaqibjameel wrote: ↑Thu Aug 29, 2019 6:56 amIt is not a problem of Memory Capacity, because blind scan stops even you delete all channels and all satellite with all TP. I tried to scan 108e by deleting all other sats and channels, it hangs only on 150 channels. Only thing left is to handle duplicate values of V.PID and A.PID.
Of capacity.
Therefore, deleting the current channel list has no effect.
The solution is to increase the amount of temporary storage memory used for ”BlindScan”.
If there is no overall memory capacity, this problem can not be solved with F / W.
The same VPID and APID are normal and there is no problem.
In this case, the service ID is always different.
-
- Posts: 40
- Joined: Sat Jun 15, 2019 6:11 am
Re: BLIND SCAN STOPS on Hotbird 13E and SES7 108E
In picture Box halted after searching just 9 channels... Do box needs a temporary memory upgrade to store just 9 channels????Xsat wrote: ↑Thu Aug 29, 2019 11:33 pmWhat I want to say is the temporary temporary storage in BlindScansaqibjameel wrote: ↑Thu Aug 29, 2019 6:56 amIt is not a problem of Memory Capacity, because blind scan stops even you delete all channels and all satellite with all TP. I tried to scan 108e by deleting all other sats and channels, it hangs only on 150 channels. Only thing left is to handle duplicate values of V.PID and A.PID.
Of capacity.
Therefore, deleting the current channel list has no effect.
The solution is to increase the amount of temporary storage memory used for ”BlindScan”.
If there is no overall memory capacity, this problem can not be solved with F / W.
The same VPID and APID are normal and there is no problem.
In this case, the service ID is always different.
- Attachments
-
- BlindScan Box halted.jpeg (43.37 KiB) Viewed 3918 times
-
- Posts: 35
- Joined: Wed May 15, 2019 3:04 am
Re: BLIND SCAN STOPS on Hotbird 13E and SES7 108E
Es un tema casi sin respuesta, para centro y sur de América sucede lo mismo con el Sat Eutelsat 117 en banda Ku, se ha informado al soporte técnico y dan respuesta que ese sat no ha sido liberado. La mayoría de los equipos freesat y/o gtmedia se cuelgan cuando llevan un avance del 36% de la búsqueda, lo raro es que el antiguo freesat V8 Golden realiza la búsqueda sin problema en ese sat.
-
- Posts: 40
- Joined: Sat Jun 15, 2019 6:11 am
Re: BLIND SCAN STOPS on Hotbird 13E and SES7 108E
latinocolom wrote: ↑Sun Sep 01, 2019 8:34 pmEs un tema casi sin respuesta, para centro y sur de América sucede lo mismo con el Sat Eutelsat 117 en banda Ku, se ha informado al soporte técnico y dan respuesta que ese sat no ha sido liberado. La mayoría de los equipos freesat y/o gtmedia se cuelgan cuando llevan un avance del 36% de la búsqueda, lo raro es que el antiguo freesat V8 Golden realiza la búsqueda sin problema en ese sat.
Gracias por tu respuesta.
Significa el receptor de satélitexxxxxxxxxx
Re: BLIND SCAN STOPS on Hotbird 13E and SES7 108E
I bet it is an overheating problem. Put a notebook cooler and try again.
-
- Posts: 40
- Joined: Sat Jun 15, 2019 6:11 am
-
- Posts: 40
- Joined: Sat Jun 15, 2019 6:11 am
-
- Posts: 40
- Joined: Sat Jun 15, 2019 6:11 am
Re: BLIND SCAN STOPS on Hotbird 13E and SES7 108E
Also my V8 PRO2 stops the scan on:
HOT BIRD 13e 12520 V 27500 (blind scan and TP scan)
HOT BIRD 13e 12520 V 27500 (blind scan and TP scan)
Last edited by gianduja on Thu Sep 12, 2019 10:35 am, edited 1 time in total.
-
- Posts: 40
- Joined: Sat Jun 15, 2019 6:11 am
Re: BLIND SCAN STOPS on Hotbird 13E and SES7 108E
Is there any one from GTMEDIA who can address this problem???? Or at-least forward this to the design engineer / expert of this Chinese company.........................
Re: BLIND SCAN STOPS on Hotbird 13E and SES7 108E
I have just got my replacement laptop.
With that I can look at the hex in the user file and maybe find out what is happening.
I susspect that the channel data or name looks like the end code for the file, so the system gets lost.
I am lucky to have an old copy of my sat that does this crash on scan that has the full data for the radio channel (VOA 17 / 18 off of Intelsat19@166e) so I can see this.
I will pass on my findings to Freesat via their service email address that is listed on their w w w dot freesat.cc site.
Owen
With that I can look at the hex in the user file and maybe find out what is happening.
I susspect that the channel data or name looks like the end code for the file, so the system gets lost.
I am lucky to have an old copy of my sat that does this crash on scan that has the full data for the radio channel (VOA 17 / 18 off of Intelsat19@166e) so I can see this.
I will pass on my findings to Freesat via their service email address that is listed on their w w w dot freesat.cc site.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: BLIND SCAN STOPS on Hotbird 13E and SES7 108E
I had the same problem with the HotBird satellite. Try on the old firmware from April this year. You can upload newer later. I don't know if they are working on this error. See the post below:
viewtopic.php?f=33&t=14955&p=60879#p60879
viewtopic.php?f=33&t=14955&p=60879#p60879
-
- Posts: 11
- Joined: Tue Mar 12, 2019 3:00 pm
- Location: Tashkent
Re: BLIND SCAN STOPS on Hotbird 13E and SES7 108E
Yes My Receiver Always Gets Hanged When I Do Blindscan On Hotbird
The Only Way I Found To Scan Hotbird Fully Was To Add Manually Tps From Lyngsat/flysat And Scan Them
The Only Way I Found To Scan Hotbird Fully Was To Add Manually Tps From Lyngsat/flysat And Scan Them
Re: BLIND SCAN STOPS on Hotbird 13E and SES7 108E
Blindscanning problem was fixed on the V8 Orange 20190912. Other models will follow
viewtopic.php?f=40&t=7791
viewtopic.php?f=40&t=7791
Re: BLIND SCAN STOPS on Hotbird 13E and SES7 108E
My blind scan crashing problem on sat Intelsat19@166e started with the August software, it scanned OK before that.cpr43 wrote: ↑Sat Sep 14, 2019 3:07 pmBlindscanning problem was fixed on the V8 Orange 20190912. Other models will follow
viewtopic.php?f=40&t=7791
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
- Posts: 40
- Joined: Sat Jun 15, 2019 6:11 am
Re: BLIND SCAN STOPS on Hotbird 13E and SES7 108E
Great work, Now waiting for Blue update.cpr43 wrote: ↑Sat Sep 14, 2019 3:07 pmBlindscanning problem was fixed on the V8 Orange 20190912. Other models will follow
viewtopic.php?f=40&t=7791
-
- Posts: 40
- Joined: Sat Jun 15, 2019 6:11 am
Re: BLIND SCAN STOPS on Hotbird 13E and SES7 108E
Many thanks all who supported this Post and Freesat/GTMedia for resolving this issue. Its working now.
- Attachments
-
- SES-7.jpeg (52.78 KiB) Viewed 3469 times
-
- HotBird.jpeg (52.91 KiB) Viewed 3469 times
-
- Posts: 35
- Joined: Wed May 15, 2019 3:04 am
Re: BLIND SCAN STOPS on Hotbird 13E and SES7 108E
Cuando daran solucion para el satélite Eutelsat 117 de la posicion 116 8 en ku, en el cual tambien se congelan los equipos al hacer busqueda ciega o automatica.saqibjameel wrote: ↑Sat Sep 21, 2019 8:25 amMany thanks all who supported this Post and Freesat/GTMedia for resolving this issue. Its working now.
Re: BLIND SCAN STOPS on Hotbird 13E and SES7 108E
Yes there are more sats / channels with this problem.latinocolom wrote: ↑Sun Nov 03, 2019 2:26 amCuando daran solucion para el satélite Eutelsat 117 de la posicion 116 8 en ku, en el cual tambien se congelan los equipos al hacer busqueda ciega o automatica.
I hope they have seen these posts and make a fix for this again.
For the automatic search, delete the TP that the scan stops on and it should scan all the other TP's fine.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.