buenas tardes
compre un gt media v8 pro2 y solo aparece en la pantalla del receptor la palabra boot y se reinicia y reinicia una y otra vez
como puedo corregir esto.
desde ya gracias
flashear un gt media v8 pro2
Moderators: admin, GTMedia Team
Re: flashear un gt media v8 pro2
necesito de su ayuda para poder echar a volar este receptor
-
- Posts: 548
- Joined: Thu Nov 29, 2018 12:50 am
Re: flashear un gt media v8 pro2
Sounds like its locked in a repeated Boot, and you will need to use the ( flash.bin ) recovery
1. Format USB Drive in FAT32
2. Download and save the latest update for your particular Receiver/Deco onto your PC in a file ....... unzip it and put the file (.bin) on your USB Flash Drive and change its name to ( flash.bin ) ......
3. Insert USB with ( flash.bin ) file into Deco/Receiver.
4. Use Switch on back or Plug in power cord and it should auto boot while you repeat pressing "Menu" on the remote.
5. It should begin to load the .bin file and you should see on the TV where it says "Do not Power Off" and let it run and it should auto reboot and run normally.
Good Luck and Beers to you!
1. Format USB Drive in FAT32
2. Download and save the latest update for your particular Receiver/Deco onto your PC in a file ....... unzip it and put the file (.bin) on your USB Flash Drive and change its name to ( flash.bin ) ......
3. Insert USB with ( flash.bin ) file into Deco/Receiver.
4. Use Switch on back or Plug in power cord and it should auto boot while you repeat pressing "Menu" on the remote.
5. It should begin to load the .bin file and you should see on the TV where it says "Do not Power Off" and let it run and it should auto reboot and run normally.
Good Luck and Beers to you!
Re: flashear un gt media v8 pro2
thanks for the advice. I hope to invite you a beerCaptain Ron wrote: ↑Sun Nov 10, 2019 9:07 pmSounds like its locked in a repeated Boot, and you will need to use the ( flash.bin ) recovery
1. Format USB Drive in FAT32
2. Download and save the latest update for your particular Receiver/Deco onto your PC in a file ....... unzip it and put the file (.bin) on your USB Flash Drive and change its name to ( flash.bin ) ......
3. Insert USB with ( flash.bin ) file into Deco/Receiver.
4. Use Switch on back or Plug in power cord and it should auto boot while you repeat pressing "Menu" on the remote.
5. It should begin to load the .bin file and you should see on the TV where it says "Do not Power Off" and let it run and it should auto reboot and run normally.
Good Luck and Beers to you!
I did what you told me but it's still the same
any other suggestions.
-
- Posts: 548
- Joined: Thu Nov 29, 2018 12:50 am
Re: flashear un gt media v8 pro2
Perhaps try it using some older update files.
Seems like quite a few people have had these lockup issues on the latest updates.
Seems like quite a few people have had these lockup issues on the latest updates.