I bought the GTMEDIA V8 finder/receiver with screen not little green box, but I can't lock signal with it. I am able to find signal with green bluetooth device/phone no problem but would rather use this.
I am choosing Eutelsat117/west but won't lock on.
I even created an Orby 116.8 with no luck
Do I need firmware update??
Please help
Thanks
ORBY 116.8 ISSUE
Moderators: admin, GTMedia Team
Re: ORBY 116.8 ISSUE
If you’re looking for orby you need to input the proper frequency. Go to lyngsat.com and check out 117w . There are 2 frequencies listed.
Re: ORBY 116.8 ISSUE
The v8 nova locks up those transponders just fine with a blind scan and scans all those channels in.bryanjb1013 wrote: ↑Thu Jan 09, 2020 5:11 pmI bought the GTMEDIA V8 finder/receiver with screen not little green box, but I can't lock signal with it. I am able to find signal with green bluetooth device/phone no problem but would rather use this.
I am choosing Eutelsat117/west but won't lock on.
I even created an Orby 116.8 with no luck
Do I need firmware update??
Please help
Thanks
Scanning the arc 43w to 139 w c/ku 11 foot dish. gt media v7hd v8 nova orange/blue v8 pro 2 v8x v8 uhd
Re: ORBY 116.8 ISSUE
Orby 116.8 W
transponders scanned in and locked OK for me (a lot of channels) but i cant decrypt any of the channels
Equipment
V8 Super ,Titanium C1PLL lnbf and 6 ft dish , location in Canada
any hints or PM me if you have any ideas ?
transponders scanned in and locked OK for me (a lot of channels) but i cant decrypt any of the channels
Equipment
V8 Super ,Titanium C1PLL lnbf and 6 ft dish , location in Canada
any hints or PM me if you have any ideas ?
Re: ORBY 116.8 ISSUE
umm, you could buy an Orby TV receiver and sub to those channels if you want to get them, otherwise as long as they are encrypted they are not receivable on any other receiver.
Re: ORBY 116.8 ISSUE
I realize that.
but since the guy that started the thread in the first place was trying to scan it in i thought he may have had a fix
but since the guy that started the thread in the first place was trying to scan it in i thought he may have had a fix