V7s bin issues
Moderators: admin, GTMedia Team
V7s bin issues
Good day all
I loaded last bin in my v7s hd and have been having problems with it like others are so I tried to load old bin but now it wont load . The sn starts with v7sa . Any way to fix this ?
Thanks
I loaded last bin in my v7s hd and have been having problems with it like others are so I tried to load old bin but now it wont load . The sn starts with v7sa . Any way to fix this ?
Thanks
Re: V7s bin issues
Use the USB flash.bin process using you previous firmware. Do a search in the upper right corner
Re: V7s bin issues
Thanks for the help tried a couple different bins no luck . Would start up and say load but not finish thanks for the info thou
-
- Posts: 16
- Joined: Sat Jul 06, 2019 11:08 pm
Re: V7s bin issues
Go to satgist.com see topic how to recover dead gtmedia v7 v8. The instructions address there using a PC rs-232 method.
Re: V7s bin issues
Thanks for the info I'll check it out
Re: V7s bin issues
flash.bin recovery is done like this.
Place a copy of the unpacked software (the .bin file) on a USB stick and rename it "flash.bin"
With the USB in the unit, power on while repeat pressing "Menu" on the remote. You must use the V7 remote on the V7.
The unit should reload the software.
Also other users say that you must use a USB stick, not a card holder etc and that stick must be 32Gb or under.
Use the rear USB port on units that have two ports.
I have had units that will not recover.
Try using the same software as was in the unit when it crashed, not the new update software.
You must use the correct software, ie that for the V7HD for the V7HD etc, not software for any other freesat units.
Try even older software as the file for flash.bin.
Look at the LED in the USB stick. When the TV shows the message "USB Upgrade, do not turn off" you should see the LED on the USB flash as the file is loaded.
The USB LED should also flash a few times as the unit first powers on and looks at it.
Also users have said to use the rear USB port for this on V8 units.
Good luck
Owen
Place a copy of the unpacked software (the .bin file) on a USB stick and rename it "flash.bin"
With the USB in the unit, power on while repeat pressing "Menu" on the remote. You must use the V7 remote on the V7.
The unit should reload the software.
Also other users say that you must use a USB stick, not a card holder etc and that stick must be 32Gb or under.
Use the rear USB port on units that have two ports.
I have had units that will not recover.
Try using the same software as was in the unit when it crashed, not the new update software.
You must use the correct software, ie that for the V7HD for the V7HD etc, not software for any other freesat units.
Try even older software as the file for flash.bin.
Look at the LED in the USB stick. When the TV shows the message "USB Upgrade, do not turn off" you should see the LED on the USB flash as the file is loaded.
The USB LED should also flash a few times as the unit first powers on and looks at it.
Also users have said to use the rear USB port for this on V8 units.
Good luck
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: V7s bin issues
Thanks owen and all with the help
Re: V7s bin issues
If all fails think of restoring your decoder to factory settings
Re: V7s bin issues
Can you please advise if old Freesat V7 HD is not supported any more?
Can I use update of V7S HD GT_media for my old device?
My Youtube stopped working already for 3 month.
Can I use update of V7S HD GT_media for my old device?
My Youtube stopped working already for 3 month.
Re: V7s bin issues
You CANNOT use any update from a V7s HD on a V7 HD receiver.
Den
Den
-
- Posts: 7
- Joined: Wed May 29, 2019 7:11 pm
Re: V7s bin issues
hola a mi me pasa lo mismo, donde puedo encontrar el firmware original de casa????? para intentar repararlo
muchas gracias
muchas gracias
-
- Posts: 7
- Joined: Wed May 29, 2019 7:11 pm
Re: V7s bin issues
hola a mi me pasa lo mismo, donde puedo encontrar el firmware original de casa????? para intentar repararlo
muchas gracias
muchas gracias
Re: V7s bin issues
viewtopic.php?f=39&t=15244Elrubioplus wrote: ↑Wed Apr 01, 2020 4:11 pmhola a mi me pasa lo mismo, donde puedo encontrar el firmware original de casa????? para intentar repararlo
muchas gracias