Senhores, o gtc possui um botão de reset na placa ?
Existe alguma forma usando o próprio controle ?
Ou indicam algum app para forçar o reboot nele.
Rebbot
Moderators: admin, nzl229, GTMedia Team
-
- Posts: 14
- Joined: Fri Jan 17, 2020 6:55 pm
Rebbot
GTC Media / Mecool K1
Net cabo Brasil ,Claro 70w , ONTV iptv
Net cabo Brasil ,Claro 70w , ONTV iptv
Re: Rebbot
Senhores, o gtc possui um botão de reset na placa ?....Noschneidercwb wrote: ↑Mon May 18, 2020 10:44 pmSenhores, o gtc possui um botão de reset na placa ?
Existe alguma forma usando o próprio controle ?
Ou indicam algum app para forçar o reboot nele.
Existe alguma forma usando o próprio controle ?....Yes, it is called 'recovery mode'...you loose all your personal data, if you have made backups it will make life easier. #1 turn off power to box #2 turn on power and at same time press MENU on remote control. Wait for recovery to finish. Set date/ time/ network/ screen_resolution/ install_apk's
Ou indicam algum app para forçar o reboot nele.... I don't think there are.
Good luck.
No live links (Rule #18) highlight the URL and use the Code tag option "</>"
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
-
- Posts: 14
- Joined: Fri Jan 17, 2020 6:55 pm
Que melhora trás pro GTC ?
Que melhora trás pro GTC ?
Aqui no Brasil, essa box usado para ver canais a cabo não abre os canais HDs, somente as box usando coreelec.
Existe algum projeto quanto a isso ?
Moved. J_V.
Aqui no Brasil, essa box usado para ver canais a cabo não abre os canais HDs, somente as box usando coreelec.
Existe algum projeto quanto a isso ?
Moved. J_V.
GTC Media / Mecool K1
Net cabo Brasil ,Claro 70w , ONTV iptv
Net cabo Brasil ,Claro 70w , ONTV iptv
Re: Rebbot
schneidercwb wrote: ↑Mon May 18, 2020 10:44 pmSenhores, o gtc possui um botão de reset na placa ?
Existe alguma forma usando o próprio controle ?
Ou indicam algum app para forçar o reboot nele.
no, pero si...es probable que pierdas la garantia si abres la caja. el boton fisico no existe pero es posible hacerlo. un pulsador electronico, soldador y estaño y listo. ah, no... perdon. falta lo fundamental. saber hacerlo.
tecnicamente no es recovery mode. mas bien un full wipe. si fuera recovery, mas de uno lo agradeceria...juan_vale wrote: ↑Mon May 18, 2020 11:11 pmExiste alguma forma usando o próprio controle ?....Yes, it is called 'recovery mode'...you loose all your personal data, if you have made backups it will make life easier. #1 turn off power to box #2 turn on power and at same time press MENU on remote control. Wait for recovery to finish. Set date/ time/ network/ screen_resolution/ install_apk's
nuevamente no, pero si... me explico. hay que rootear el dispositivo para ello. habia un metodo pero no es recomendable ya que podria dejar inservible al dispositivo.
nunca explicaron el porqué pero despues de leer que hubo muchos usuarios que aparentemente tenian problemas de arranque del dispositivo, yo decidi desrootear y perder un monton de beneficios en ello. una verdadera lastima. incluso pude tocar la apk DVB y sus dependencias para "mejorarlo".
Re: Rebbot
#1 The question was is there a reset button on the pcb... the answer is NO. This has been discussed before, I am not going to suggest to an inexperienced user how to solder to a SMD board or how to short pins on an IC.
#2 Whatever you want to call it, it will fix a corrupt GTC and get it working again. See this post from the Devs >> http://www.freesat.cn/forum/viewtopic.p ... 114#p36114
#3. If you root your box and continue to use it as a GTC it will brick on the next update. Don't come crying here when it does.
#2 Whatever you want to call it, it will fix a corrupt GTC and get it working again. See this post from the Devs >> http://www.freesat.cn/forum/viewtopic.p ... 114#p36114
#3. If you root your box and continue to use it as a GTC it will brick on the next update. Don't come crying here when it does.
No live links (Rule #18) highlight the URL and use the Code tag option "</>"
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
Re: Rebbot
bueno, no se cual es el argumento para llamar a alguien inexperto. habla de recovery, de instalar xxxxxxx..
este post no lleva a ninguna solucion. ni siquiera es claro. o peor aun, lleva a callejones sin salida! vi un par de links que llevan a post borrados...juan_vale wrote: ↑Fri May 22, 2020 1:56 am#2 Whatever you want to call it, it will fix a corrupt GTC and get it working again. See this post from the Devs >> http://www.freesat.cn/forum/viewtopic.p ... 114#p36114
honestamente hablando, preferiria tener acceso root antes que recibir una actualizacion...