Biss Auto roll
Moderators: admin, GTMedia Team
Biss Auto roll
Anyone have idea why for the past coupe of months (since Covid started) none of my internet connected boxes will auto decode Biss channels?
Box says please wait, and after a lot of waiting nothing happens?
I am after the ABC feeds in particular if someone could help?
Tony
Box says please wait, and after a lot of waiting nothing happens?
I am after the ABC feeds in particular if someone could help?
Tony
Re: Biss Auto roll
What satellite, what TP, orbit location please.ftass wrote: ↑Fri Jun 26, 2020 12:47 pmAnyone have idea why for the past coupe of months (since Covid started) none of my internet connected boxes will auto decode Biss channels?
Box says please wait, and after a lot of waiting nothing happens?
I am after the ABC feeds in particular if someone could help?
Tony
Re: Biss Auto roll
Thank you for your message!
Optus D2 ABC Feeds and Asiasat 5 feeds.
Kind regards,
Tony
Optus D2 ABC Feeds and Asiasat 5 feeds.
Kind regards,
Tony
Re: Biss Auto roll
There is only 1 GTMedia box Auto Biss here the V8X and was just released.ftass wrote: ↑Fri Jun 26, 2020 12:47 pmAnyone have idea why for the past coupe of months (since Covid started) none of my internet connected boxes will auto decode Biss channels?
Box says please wait, and after a lot of waiting nothing happens?
I am after the ABC feeds in particular if someone could help?
Tony
Re: Biss Auto roll
Sadly I do not see the ABC TP as it is Auzzy only, not Auzzy / NZ.
Are they temp feeds up for a short time, or constant channel?
I am hoping to set up an Asiasat5 dish for feeds.
I see that sat at 4.2 degrees above the horizon.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Biss Auto roll
ABC feeds are constant, so they may not have to be repeating the key on air possibly. 4.2 degrees is low! Watch out for earth noise!
Re: Biss Auto roll
I just clear the 220kV transmission lines 500m away across clear fields. Works well,
I had a dish on it before the mover actuator stripped.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Biss Auto roll
Me too experiencing the same issue.
Biss key didn’t Auto rolled when I wanted to see the cricket feed on Intelsat 7/10 @68.5.
3855H/6666.
Do i have to take any additional steps?
Biss key didn’t Auto rolled when I wanted to see the cricket feed on Intelsat 7/10 @68.5.
3855H/6666.
Do i have to take any additional steps?