v8 UHD Firmware v220
Moderators: admin, GTMedia Team
v8 UHD Firmware v220
Just upgraded to v220 now after uploading user database and setting up box i get no chanells after doing any scan. Blind scan seems to stall takes forever to scan, tried accurate, and preset nothing. Forced v219 update box works fine. This firmware v220 needs consideable work to be useful!!!
Re: v8 UHD Firmware v220
Try doing backupspc412 wrote: ↑Mon Jan 18, 2021 7:47 pmJust upgraded to v220 now after uploading user database and setting up box i get no chanells after doing any scan. Blind scan seems to stall takes forever to scan, tried accurate, and preset nothing. Forced v219 update box works fine. This firmware v220 needs consideable work to be useful!!!
Factory reset
Re-install latest
Factory reset
Re-install backup
Re: v8 UHD Firmware v220
I'll give it a try see what happens
Re: v8 UHD Firmware v220
Didn't work so i flashed back to v219. Scan's are working so v220 has issues
Re: v8 UHD Firmware v220
Maybe it's the user db thats not compatible with v220?
Re: v8 UHD Firmware v220
Check that your antenna setting are correct for your dishes.
Owen
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: v8 UHD Firmware v220
Also check that you have not got LNB power set to OFF.
Owen
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: v8 UHD Firmware v220
I'm using an universal lnb set at 9750-16000 in my settings, polarity=auto, Diseqc=disabled. I checked my cable connections everything id fine. Lnb power is on
Re: v8 UHD Firmware v220
Signal varies around 52-65%, Quality is 0%. I know i need to tweak the dish
Re: v8 UHD Firmware v220
Have you re down loaded a new copy of V220?
Have you tried setting up a fresh sat list after you update rather than reload your current list?
Is the listing in the antenna setting that we cannot change still saying LNB-1?
Owen
Have you tried setting up a fresh sat list after you update rather than reload your current list?
Is the listing in the antenna setting that we cannot change still saying LNB-1?
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: v8 UHD Firmware v220
I haven't setup new sat list yet. I using 60w-133w sats, I'm in the eastern USA. The Antenna Connection=Tuner1, I have it set to fixed.
Re: v8 UHD Firmware v220
In the single sat search area LNB1 is greyed out but it is there in that section
Re: v8 UHD Firmware v220
Try a factory reset and then making a new sat list in the unit and see what you get.
You can always reload your own list later.
Owen
Tom.w
This user reported
You can always reload your own list later.
Owen
Tom.w
This user reported
Just upgraded to v220 now after uploading user database and setting up box i get no chanells after doing any scan. Blind scan seems to stall takes forever to scan, tried accurate, and preset nothing. Forced v219 update box works fine. This firmware v220 needs consideable work to be useful!!!
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: v8 UHD Firmware v220
Back to v219 again, after all the suggestions v220 still will not Blind/Accurate scan seems to be stuck taking very, very long time with no results. The last scan i tried waited 3 hours nothing, i didn't even get the usual No Program Found message. I checked my connections, the Dish everything v220 not working. V219 does work
Re: v8 UHD Firmware v220
hellospc412 wrote: ↑Wed Jan 20, 2021 3:07 amBack to v219 again, after all the suggestions v220 still will not Blind/Accurate scan seems to be stuck taking very, very long time with no results. The last scan i tried waited 3 hours nothing, i didn't even get the usual No Program Found message. I checked my connections, the Dish everything v220 not working. V219 does work
can you backup your v220 firmware to me.i will check it
Re: v8 UHD Firmware v220
Here is a backup of my firmware v220
Tom.W
Forum users please do not download the firmware i posted it is for Tom.W to look at thank you
Tom.W
Forum users please do not download the firmware i posted it is for Tom.W to look at thank you
- Attachments
-
- V8UHD_flash.rar
- (4.99 MiB) Downloaded 32 times
Re: v8 UHD Firmware v220
V220 did not connect my cline ,cline is working in another deco brand.
Re: v8 UHD Firmware v220
hi, will you be able to add support for Griffin cards and also do you support CI + cards
Re: v8 UHD Firmware v220
yes i have card. i will test and answer you .. thank you.