Canali HD V7PRO
Moderators: admin, GTMedia Team
Canali HD V7PRO
Buongiorno a tutti, ho acquistato il decoder V7 PRO ho aggiornato il firmware all'ultima vers. GTMedia_V7Pro_Release_V262_20210316 come spiegato in alcuni post ma i canali RAI e MEDIASET HD non si vedono, premetto che ho regolare scheda TivùSat, se può essere utile non riesco a vedere i canali posizionati sui trasponder
Rai (Freq: 11765 V; symbol rate 29900; FEC 3/4 – DVB-S2 – HotBird 13E)
Mediaset (Freq: 11432 V, sr: 29900, FEC: 3/4 – DVB-S2 – HotBird 13E)
Voglio precisare che altri canali in HD di Rai esempio Rai Premium HD li vedo altra prova che ho fatto sostituire il decoder con uno in prestito e funziona tutto regolarmente.
Grazie
Rai (Freq: 11765 V; symbol rate 29900; FEC 3/4 – DVB-S2 – HotBird 13E)
Mediaset (Freq: 11432 V, sr: 29900, FEC: 3/4 – DVB-S2 – HotBird 13E)
Voglio precisare che altri canali in HD di Rai esempio Rai Premium HD li vedo altra prova che ho fatto sostituire il decoder con uno in prestito e funziona tutto regolarmente.
Grazie
Re: V7PRO HD Channels
Are you sure that you have the correct lnb settings (9750 - 10600), with these setting you should be able to bring in the said transponders.
On the said transponders, i have twenty two channels, with the V7PRO that i have. Can you give us a bit more detail.
Is it that you cannot put the said transponders into the receiver , to be able to scan for the said channels.
You may have a transponder in the receiver at 13e as 11765v 27500, if so delete this and put in transponder 11765v 29900, you should then be able to scan in the said channels.
Let us know now you get on, we will be able to help you more.
Den
On the said transponders, i have twenty two channels, with the V7PRO that i have. Can you give us a bit more detail.
Is it that you cannot put the said transponders into the receiver , to be able to scan for the said channels.
You may have a transponder in the receiver at 13e as 11765v 27500, if so delete this and put in transponder 11765v 29900, you should then be able to scan in the said channels.
Let us know now you get on, we will be able to help you more.
Den
Re: Canali HD V7PRO
Ciao Den, ti confermo freq. LNB universale 9750-10600 ho cancellato i trasponder e poi aggiungi, ma nulla il decoder non trova i canali Rai e Mediaset in HD, come controprova ho utilizzato un decoder sat ICAN S490 Digitale HD e funziona tutto, secondo me è da rivedere come imposta il FEC che dovrebbe essere a 3/4 o automatico, ho letto altri post di persone che hanno lo stesso mio problema, magari possiamo confrontarci per fare delle prove?
Grazie
Grazie
Re: Canali HD V7PRO
Have carried out another test with the V7PRO that i have,(after checking Flysat) 11765V 29900, shows that the said channels are in HD.
So carried out a scan of the said transponder, and found the following, in order of scanning, RAI 1HD (NOT marked as HD),RAI SPORT+HD(Marked as HD),
RAI MOVIE HD(Marked as HD),RAI 4K (NOT Marked as HD),RAI 2HD(Marked as HD), RAI 3HD(Marked as HD),RAI 4HD(Marked as HD).
Total of seven channels on that transponder.
Den
So carried out a scan of the said transponder, and found the following, in order of scanning, RAI 1HD (NOT marked as HD),RAI SPORT+HD(Marked as HD),
RAI MOVIE HD(Marked as HD),RAI 4K (NOT Marked as HD),RAI 2HD(Marked as HD), RAI 3HD(Marked as HD),RAI 4HD(Marked as HD).
Total of seven channels on that transponder.
Den
Re: Canali HD V7PRO
Den ti riporto al link di tivùsat con i relativi trasponder da memorizzare (Rai e Mediaset) tu che firmware hai caricato sul decoder?
Grazie
Edited:
No Live links, rule#18
viewtopic.php?f=47&t=16325
[/quote]
Grazie
Edited:
No Live links, rule#18
viewtopic.php?f=47&t=16325
[/quote]
Re: V7PRO HD Channels
I think i have found it, Menu / install / ITALY LCN SCAN, use that and you should get all the channels that you require, plus i think you may be able to use the card to decode the channels.
Den
Den
Re: Canali HD V7PRO
Prove già fatte con LCN Italy ma continuo a non vedere i canali elencati, puoi dirmi che versione hai di firmware sul tuo decoder?
Lux
Lux
Re: V7PRO HD Channels
I have V3.2.88.9.262 DTD 16 MAR 2021.
Den
Den
Re: Canali HD V7PRO
Uguale alla mia release, puoi provare il trasponder di Mediaset Freq: 11432 V, sr: 29900, FEC: 3/4 - DVB-S2 - HotBird 13E
ti ringrazio
Lux
ti ringrazio
Lux
Re: V7PRO HD Channels
Have checked transponder 11432v 29900, did find 15 channels, one (FTA), four (marked as HD) ITALIA 1 / 20MEDIASAT / CANALE5 /RETE4.
Den
Den
Re: Canali HD V7PRO
buongirno a tutti anche io ho lo stesso problema non vedo i canali rai e mediaset in hd che soluzione ce grazie del aiuto
Re: Canali HD V7PRO
Ciao Mirko, credo sia dovuto soltanto a questi due operatori Tv che hanno introdotto nuove impostazioni di trasmissione, altri canali della lista TivùSat li vedo, bisognerebbe capire perché su un decoder omologato TivùSat funziona tutto e su altri tipo il V7Pro no, confrontiamoci, il decoder V7Pro ha grandi potenzialità, piano piano con ulteriori aggiornamenti verranno fuori speriamo presto..
Re: Canali HD V7PRO
Io vedo gli hd di rai e mediaset solo facendo la scansione in modalità blind scan. Se non lo avete fatto provate la ricerca canali con quella impostazione nel menu la trovate nelle impostazioni come SCANSIONE NASCOSTA.
Re: Canali HD V7PRO
Ciao Linch, ho fatto come tu hai scritto da impostazioni ricerca satelliti, metto solo Hotbird 13E ricerca nascosta ma nulla non vengono fuori i Mediaset e Rai altra cosa strana se vado a posizionarmi sui trasponder vedo il segnale 60% in rosso qualità zero, provo altri trasponder e funzionano con segnali che vanno dal 70% con qualità >del 90% ho provato a vedere se il decoder commuta la tensione V/H 13-18volt e funziona l'ho fatto giusto per un eccesso di zelo, questo perché altri segnali dei trasponder funzionano sia in V che H. MISTERO!
Re: Canali HD V7PRO
helloLux wrote: ↑Mon Apr 12, 2021 11:40 amCiao Linch, ho fatto come tu hai scritto da impostazioni ricerca satelliti, metto solo Hotbird 13E ricerca nascosta ma nulla non vengono fuori i Mediaset e Rai altra cosa strana se vado a posizionarmi sui trasponder vedo il segnale 60% in rosso qualità zero, provo altri trasponder e funzionano con segnali che vanno dal 70% con qualità >del 90% ho provato a vedere se il decoder commuta la tensione V/H 13-18volt e funziona l'ho fatto giusto per un eccesso di zelo, questo perché altri segnali dei trasponder funzionano sia in V che H. MISTERO!
your v7pro box lnb can not convert 13V/18V, Yes or NO?
If yes,can you tell me what is the box SN?
Re: Canali HD V7PRO
If the LNB skew is incorrect you will see the V and H TP's on both V and H (13 and 18v).Lux wrote: ↑Mon Apr 12, 2021 11:40 amCiao Linch, ho fatto come tu hai scritto da impostazioni ricerca satelliti, metto solo Hotbird 13E ricerca nascosta ma nulla non vengono fuori i Mediaset e Rai altra cosa strana se vado a posizionarmi sui trasponder vedo il segnale 60% in rosso qualità zero, provo altri trasponder e funzionano con segnali che vanno dal 70% con qualità >del 90% ho provato a vedere se il decoder commuta la tensione V/H 13-18volt e funziona l'ho fatto giusto per un eccesso di zelo, questo perché altri segnali dei trasponder funzionano sia in V che H. MISTERO!
Also if you have one of those quatro LNB's that have separate outlets for each of low H, Low V, high H and High band V, you will need a connection to each output. It is unlikely you have one of those, but you also may be connected through a H / V splitter sharer.
Another thing that makes H channels appear on V is another set top box sharing the splitter.
Maybe also a On Cable Solution LNB, the sort that changes the V band to a lower frequency of H.
Most likely skew.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Canali HD V7PRO
Ciao Feralkiwi, l'impianto che utilizzo è semplice un LNB universale con 1 uscita collegato direttamente al decoder, sto aspettando l'LNB nuovo per sostituire l'attuale vecchio, inoltre controllando bene ho notato che tutti i trasponder in polarizzazione V non si ricevono non è un problema del decoder perché lo switch 13/18 V funziona regolarmente.
Vi farò sapere alla sostituzione dell'LNB.
Ciao
Vi farò sapere alla sostituzione dell'LNB.
Ciao
-
- Posts: 24
- Joined: Sat Nov 12, 2016 5:15 pm
Re: Canali HD V7PRO
il problema è lnb, mi è capitato a me , ho cambiato e risolto.
Re: Canali HD V7PRO
Grazie parisifranco1965 del consiglio, lo sostituirò il prima possibile.
Ciao
Ciao
Re: Canali HD V7PRO
Check your cables too.
As the H polarity uses 18V, if that voltage does not reach the LNB due to cable losses it will not change to V.
Things like rusted inner wire, loose connectors can drop the voltage.
Also dirt / corrosion inside connectors uses power too.
Owen
As the H polarity uses 18V, if that voltage does not reach the LNB due to cable losses it will not change to V.
Things like rusted inner wire, loose connectors can drop the voltage.
Also dirt / corrosion inside connectors uses power too.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.