Gt Combo update
Moderators: admin, nzl229, GTMedia Team
Gt Combo update
The update has arrived, I hope it will be more
- Attachments
-
- The update has arrived, I hope it will be more
- Screenshot_20210513-204611_Gallery.jpg (206.84 KiB) Viewed 2777 times
Gt Combo update
es mas lenta, problemas cambio de canales, se congelado, no cambia canales entre satelites, mas testarudo que el GTC, escaneas y se queda congelado
no actualizen la anterior buscaba las biss, en esta no, pense que seria una mejor version mejorando por mucho al GTC, ojala mejoren
It is slower, problems changing channels, it is frozen, it does not change channels between satellites, more stubborn than the GTC, you scan and it stays frozen
They do not update the previous one I was looking for the biss, in this one, I thought it would be a better version improving the GTC by a lot, hopefully they improve, xxxxxxxxx
no actualizen la anterior buscaba las biss, en esta no, pense que seria una mejor version mejorando por mucho al GTC, ojala mejoren
It is slower, problems changing channels, it is frozen, it does not change channels between satellites, more stubborn than the GTC, you scan and it stays frozen
They do not update the previous one I was looking for the biss, in this one, I thought it would be a better version improving the GTC by a lot, hopefully they improve, xxxxxxxxx
Re: Gt Combo update
thank you very much for your enjoying Gtmedia products.
we are doing our best for these issues and are improving Gtcombo performance.
after you upgrade the newest firmware,please tell me if you have any questions.
Best Regards.
we are doing our best for these issues and are improving Gtcombo performance.
after you upgrade the newest firmware,please tell me if you have any questions.
Best Regards.
-
- Posts: 97
- Joined: Mon Jul 02, 2018 4:24 pm
- Location: Costa Rica
Re: Gt Combo update
Hi Tom.w,
I'm waitting for my new GTcombo to arrive.
The main function that I'll test is "Full Auto PowerVu, DRE &Biss key".
For me it is expected to work similar to V8 UHD or V8X
Is it this functionality enabled and running with the update?
regards,
Johan
I'm waitting for my new GTcombo to arrive.
The main function that I'll test is "Full Auto PowerVu, DRE &Biss key".
For me it is expected to work similar to V8 UHD or V8X
Is it this functionality enabled and running with the update?
regards,
Johan
Re: Gt Combo update
yes.
the gtcombo supports these functions.after you test the box,if you have any questions,please tell us.
we will fix them then update the firmware by internet OTA.
the gtcombo supports these functions.after you test the box,if you have any questions,please tell us.
we will fix them then update the firmware by internet OTA.
-
- Posts: 272
- Joined: Tue Sep 24, 2019 3:01 pm
Re: Gt Combo update
hello gt media
For fabor how can you get the cw from the gt combo there is no manresa or by the command or softcam
For fabor how can you get the cw from the gt combo there is no manresa or by the command or softcam
-
- Posts: 97
- Joined: Mon Jul 02, 2018 4:24 pm
- Location: Costa Rica
Re: Gt Combo update
Thanks for the response! I I'll provide possitive feedback once I test the receiver.
regards,
Johan
Re: Gt Combo update
I have the GT Combo For 4 days and IPTV better and very good no problems About the satellite Blind Scan for now slow and freezes at 105 west 70% scan freezes at 00981.00mhz 4168mhz. V8UHD faster in all scans.Butt only few firmware.The combo will be one good box.I only setup the IPTV and the Satellites for now.Important At the west satellites from 133w to 55.5 west and Hispansat all Powervu channels are encrypted The biss keys no problem did need to repair that.I have to learning to import that Softcam and the cccam
Last edited by tanka on Sat May 15, 2021 1:07 am, edited 2 times in total.
Re: Gt Combo update
Hi Tom,
I received mine about 10 days ago and I was really disappointed from all angles.
Auto PowerVu doesn't work at all, I tested it in 55.5w C and 58w C, 40.5w C w/no luck whatsoever.
4:2:2 Feeds aren't playing correctly, it seems like the GTcombo is autosourcing the 4:2:2 broadcasts into the GTplayer app resulting into a very poor and lagging video. Any suggestions?
I hope there will be more updates coming over.
Thanks,
Re: Gt Combo update
To access the softcam you press 6666 while on the CW menu.
cpr43 suggests naming the softcam.key file with capitals "SoftCam.key" to load it.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Gt Combo update
Thanks for answering, but I want to see the feed key and it doesn't seem like the receiver either eutoroll but it doesn't seem like the key either by softcam or anything.
Re: Gt Combo update
I have had my softcam.key file load. The software just looks for the file on the USB and loads it.
Like you I see no way to export a softcam from this unit.
You usually export to see the found codes on your PC.
I am testing cpr43's capital method today, so may know more later
Owen
Edited:
cpr43's method:
Like you I see no way to export a softcam from this unit.
You usually export to see the found codes on your PC.
I am testing cpr43's capital method today, so may know more later
Owen
Edited:
cpr43's method:
Load your USB with the softcam on the USB rear connector
Menu
Installation
6666
Cs protocol
Oscam configuration
File storage will show up /storage/EA57-*A79/SoftCam.Key (S, C and K capital letter)
OK to check mark
Import (red)
Import Oscam Configuration Success message will show up
Exit
Reboot
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Gt Combo update
Thank you for your my friend
-
- Posts: 272
- Joined: Tue Sep 24, 2019 3:01 pm
Re: Gt Combo update
Thank you for the attention and support from the GTMedia Team.
Re: Gt Combo update
My latest testing shows that if I use a satellite on the default list the switch / LNB settings work OK.
If I "ADD" a satellite and set up the switching, it does not work.
So if you are having issue with casscade switching (Both DiSEqC 1.1 and 1.0 ) or issues with univresal LNB settings like 9750/10600 then reuse a satellite on the default list.
eg:
I added a satellite with DiSEqC 1.1 port 6 DiSEqC 1.0 port 2 13000 LNB.
The switch commands are sent in the incorrect order, 1.0 first and 1.1 second, so the 1.1 switch is set correctly, but the 1.0 switch is default port 1, not port 2.
This works if the channels are scanned in as the resend of the commands will set the second 1.0 switch.
BUT for a first blind scan the second switch is not set and you scan the TP's for port 1 and as the switch commands are sent again before scanning the found TP's for channels, the H channel are not scanned.
With a universal LNB (9750/10600) it is way wrong and does not scan.
If you have issues with switching or universal LNB's like 9750/10600, use a default satellite on the preloaded list.
Also I find if I export and import my user data, the moved channels and favorite list, USALS lat and long etc are saved.
Edited: Any channels added to favorites lists are removed after scanning that satellite.
I have sent these findings to GT Media.
Owen
If I "ADD" a satellite and set up the switching, it does not work.
So if you are having issue with casscade switching (Both DiSEqC 1.1 and 1.0 ) or issues with univresal LNB settings like 9750/10600 then reuse a satellite on the default list.
eg:
I added a satellite with DiSEqC 1.1 port 6 DiSEqC 1.0 port 2 13000 LNB.
The switch commands are sent in the incorrect order, 1.0 first and 1.1 second, so the 1.1 switch is set correctly, but the 1.0 switch is default port 1, not port 2.
This works if the channels are scanned in as the resend of the commands will set the second 1.0 switch.
BUT for a first blind scan the second switch is not set and you scan the TP's for port 1 and as the switch commands are sent again before scanning the found TP's for channels, the H channel are not scanned.
With a universal LNB (9750/10600) it is way wrong and does not scan.
If you have issues with switching or universal LNB's like 9750/10600, use a default satellite on the preloaded list.
Also I find if I export and import my user data, the moved channels and favorite list, USALS lat and long etc are saved.
Edited: Any channels added to favorites lists are removed after scanning that satellite.
I have sent these findings to GT Media.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
- Posts: 272
- Joined: Tue Sep 24, 2019 3:01 pm
Re: Gt Combo update
Thankyou for the response,
I myself use 2 parabolic dishes with 2 drives. 1 mesh parabolic dish with 2 Lnb using a special 4x1 C band diseq and 1 solid parabolic dish using 1 Lnb ku band without using diseq.
Both my mesh and Solid parabolic dishes use separate cables.
Everything went normally and smoothly without any problems on the previous GTMedia Receiver.
I myself use 2 parabolic dishes with 2 drives. 1 mesh parabolic dish with 2 Lnb using a special 4x1 C band diseq and 1 solid parabolic dish using 1 Lnb ku band without using diseq.
Both my mesh and Solid parabolic dishes use separate cables.
Everything went normally and smoothly without any problems on the previous GTMedia Receiver.
Re: Gt Combo update
Below here are the two satellite from my user data file.
The top one is a default list satellite, Eutelsat 172B (173.5E Ku-band) As far as I know this sat does not exist.
It is set in the menus as 9750/10600 LNB and port 5 / 3 for switching.
This sat scans OK
The second one is a satellite I "Added". Intellsat 18 ku. In the earlier versions of software this sat was on the list.
Again the menu is set for 9750/10600 and port 5 / 3
Note the difference in the file output. The Freqency is 10750, not 10600 and the threshold is one digit short.
This sat does not scan.
I hope this helps GT Media to fix this.
Owen
<satellite name="Eutelsat 172B (173.5E Ku-band)" longitude="1735" lof_hi="10600000" lof_lo="9750000" lof_threshold="11700000" lnb_power="13/18v" signal_22khz="auto" toneburst="none" diseqc1_0="lnb3" diseqc1_1="lnb5" motor="none">
<satellite name="Intellsat 18 ku" longitude="1801" lof_hi="10750000" lof_lo="9750000" lof_threshold="1170000" lnb_power="13/18v" signal_22khz="auto" toneburst="none" diseqc1_0="lnb3" diseqc1_1="lnb5" motor="none"/>
The top one is a default list satellite, Eutelsat 172B (173.5E Ku-band) As far as I know this sat does not exist.
It is set in the menus as 9750/10600 LNB and port 5 / 3 for switching.
This sat scans OK
The second one is a satellite I "Added". Intellsat 18 ku. In the earlier versions of software this sat was on the list.
Again the menu is set for 9750/10600 and port 5 / 3
Note the difference in the file output. The Freqency is 10750, not 10600 and the threshold is one digit short.
This sat does not scan.
I hope this helps GT Media to fix this.
Owen
<satellite name="Eutelsat 172B (173.5E Ku-band)" longitude="1735" lof_hi="10600000" lof_lo="9750000" lof_threshold="11700000" lnb_power="13/18v" signal_22khz="auto" toneburst="none" diseqc1_0="lnb3" diseqc1_1="lnb5" motor="none">
<satellite name="Intellsat 18 ku" longitude="1801" lof_hi="10750000" lof_lo="9750000" lof_threshold="1170000" lnb_power="13/18v" signal_22khz="auto" toneburst="none" diseqc1_0="lnb3" diseqc1_1="lnb5" motor="none"/>
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
- Posts: 272
- Joined: Tue Sep 24, 2019 3:01 pm
Re: Gt Combo update
Thank you for your information.
Best Regards.
Best Regards.
T2MI @ 49°E
Hello ..
I've done an online update, and I tried to Yamal 601 C-band still can't get the T2MI channel from that satellite ..
Regards
I've done an online update, and I tried to Yamal 601 C-band still can't get the T2MI channel from that satellite ..
Regards
- Attachments
-
- Update.jpg (2.21 MiB) Viewed 2570 times
-
- T2MI.jpg (530.38 KiB) Viewed 2570 times
-
- Posts: 272
- Joined: Tue Sep 24, 2019 3:01 pm
Re: Gt Combo update
I load the Cccam in no problem on the 3.0 usb port .The ( SoftCam) (softcam) file. I tray loading from the 3.0 usb port and the 2.0 usb rear .And I did CA informaton 6666 cs protocol softcam setting ok please wait and then 0 add 0 edit 0 delete. the red for import and export don't appear.I tray 3.0 usbs 5times and 2.0 usbs 5times at rear and no't able to load the file. At same time the v8uhd I loadin the same files no problem.The file are 22 kb .Any answers.Thank you
Re: Gt Combo update
Try renaming file to SoftCam.Key. S, C and K with capital letter. Remember , the GTcombo softcam file is very different from regular GTMedia models. You need to re-write your softcam file following enigma2 groupstanka wrote: ↑Sat May 15, 2021 3:28 pmI load the Cccam in no problem on the 3.0 usb port .The ( SoftCam) (softcam) file. I tray loading from the 3.0 usb port and the 2.0 usb rear .And I did CA informaton 6666 cs protocol softcam setting ok please wait and then 0 add 0 edit 0 delete. the red for import and export don't appear.I tray 3.0 usbs 5times and 2.0 usbs 5times at rear and no't able to load the file. At same time the v8uhd I loadin the same files no problem.The file are 22 kb .Any answers.Thank you
Menu
Installation
6666
Cs protocol
Oscam configuration
File storage will show up /storage/EA57-*A79/SoftCam.Key (S, C and K capital letter)
OK to check mark
Import (red)
Import Oscam Configuration Success message will show up
Exit
Reboot
Softcam.Key file guide, using satellite 30.0 west. You need to write each channel sid:
; Group 0x30w 30W channels:
P 00300029 00 00000000000000 ; cHANNEL nAME (oPTIONAL)
P 00300029 01 00000000000000 ; cHANNEL nAME (oPTIONAL)1
P 00300034 00 00000000000000 ; cHANNEL nAME (oPTIONAL)
P 00300034 01 00000000000000 ; cHANNEL nAME (oPTIONAL)
P 0030019B 00 00000000000000 ; cHANNEL nAME (oPTIONAL)
P 0030019B 01 00000000000000 ; cHANNEL nAME (oPTIONAL)
P 0030 xxxxxxxx XXXXXXXXXXXXXX ; EMM Key
P 0030 xxxxxxxx XXXXXXXXXXXXXX ; EMM Key
All the 00000000000000 will be filled once the autoroll founds the ECM keys using the EMM
Re: Gt Combo update
for power vu there is a rule but for eutobiss don't go
-
- Posts: 97
- Joined: Mon Jul 02, 2018 4:24 pm
- Location: Costa Rica
Re: Gt Combo update
cpr43 wrote: ↑Sat May 15, 2021 3:38 pmTry renaming file to SoftCam.Key. S, C and K with capital letter. Remember , the GTcombo softcam file is very different from regular GTMedia models. You need to re-write your softcam file following enigma2 groupstanka wrote: ↑Sat May 15, 2021 3:28 pmI load the Cccam in no problem on the 3.0 usb port .The ( SoftCam) (softcam) file. I tray loading from the 3.0 usb port and the 2.0 usb rear .And I did CA informaton 6666 cs protocol softcam setting ok please wait and then 0 add 0 edit 0 delete. the red for import and export don't appear.I tray 3.0 usbs 5times and 2.0 usbs 5times at rear and no't able to load the file. At same time the v8uhd I loadin the same files no problem.The file are 22 kb .Any answers.Thank you
Menu
Installation
6666
Cs protocol
Oscam configuration
File storage will show up /storage/EA57-*A79/SoftCam.Key (S, C and K capital letter)
OK to check mark
Import (red)
Import Oscam Configuration Success message will show up
Exit
Reboot
Softcam.Key file guide, using satellite 30.0 west. You need to write each channel sid:
; Group 0x30w 30W channels:
P 00300029 00 00000000000000 ; cHANNEL nAME (oPTIONAL)
P 00300029 01 00000000000000 ; cHANNEL nAME (oPTIONAL)1
P 00300034 00 00000000000000 ; cHANNEL nAME (oPTIONAL)
P 00300034 01 00000000000000 ; cHANNEL nAME (oPTIONAL)
P 0030019B 00 00000000000000 ; cHANNEL nAME (oPTIONAL)
P 0030019B 01 00000000000000 ; cHANNEL nAME (oPTIONAL)
P 0030 xxxxxxxx XXXXXXXXXXXXXX ; EMM Key
P 0030 xxxxxxxx XXXXXXXXXXXXXX ; EMM Key
All the 00000000000000 will be filled once the autoroll founds the ECM keys using the EMM
Hi @ cpr43
In the GT media selling web page it is said that GT combo supports "Full Auto PowerVu, DRE &Biss key", just like V8 UHD I was expecting no to have to introduce any KEY manually.
@Tom.w Told me in this thread that those features are supported.
This means those features are not actually supported? will be supported in the future?
regards,
Johan