You are all right, my friend, the same thing happens to me at the end nothingjoviedop104 wrote: ↑Sat May 15, 2021 3:58 pmcpr43 wrote: ↑Sat May 15, 2021 3:38 pmTry renaming file to SoftCam.Key. S, C and K with capital letter. Remember , the GTcombo softcam file is very different from regular GTMedia models. You need to re-write your softcam file following enigma2 groupstanka wrote: ↑Sat May 15, 2021 3:28 pmI load the Cccam in no problem on the 3.0 usb port .The ( SoftCam) (softcam) file. I tray loading from the 3.0 usb port and the 2.0 usb rear .And I did CA informaton 6666 cs protocol softcam setting ok please wait and then 0 add 0 edit 0 delete. the red for import and export don't appear.I tray 3.0 usbs 5times and 2.0 usbs 5times at rear and no't able to load the file. At same time the v8uhd I loadin the same files no problem.The file are 22 kb .Any answers.Thank you
Menu
Installation
6666
Cs protocol
Oscam configuration
File storage will show up /storage/EA57-*A79/SoftCam.Key (S, C and K capital letter)
OK to check mark
Import (red)
Import Oscam Configuration Success message will show up
Exit
Reboot
Softcam.Key file guide, using satellite 30.0 west. You need to write each channel sid:
; Group 0x30w 30W channels:
P 00300029 00 00000000000000 ; cHANNEL nAME (oPTIONAL)
P 00300029 01 00000000000000 ; cHANNEL nAME (oPTIONAL)1
P 00300034 00 00000000000000 ; cHANNEL nAME (oPTIONAL)
P 00300034 01 00000000000000 ; cHANNEL nAME (oPTIONAL)
P 0030019B 00 00000000000000 ; cHANNEL nAME (oPTIONAL)
P 0030019B 01 00000000000000 ; cHANNEL nAME (oPTIONAL)
P 0030 xxxxxxxx XXXXXXXXXXXXXX ; EMM Key
P 0030 xxxxxxxx XXXXXXXXXXXXXX ; EMM Key
All the 00000000000000 will be filled once the autoroll founds the ECM keys using the EMM
Hi @ cpr43
In the GT media selling web page it is said that GT combo supports "Full Auto PowerVu, DRE &Biss key", just like V8 UHD I was expecting no to have to introduce any KEY manually.
@Tom.w Told me in this thread that those features are supported.
This means those features are not actually supported? will be supported in the future?
regards,
Johan
Gt Combo update
Moderators: admin, nzl229, GTMedia Team
Re: Gt Combo update
Re: Gt Combo update
I have no idea or what do you expected. Most of the GTmedia does support PowerVu, Biss auto. Most Biss come up with Auto Biss still those keys are not showed on the Softcam section. Autoroll of Power Vu on the GTCombo will works fine if you give the EMM AU keys so the box can look for them or if you have your channels ECM 00 and 01 you can add them and open the channels. There is always a work from your side, look or ask for keys and create your own softcam.key file. Some other models are beginning to have keys embedded to the firmware but GTC series don't
Re: Gt Combo update
cpr43 wrote: ↑Sat May 15, 2021 4:40 pmI have no idea or what do you expected. Most of the GTmedia does support PowerVu, Biss auto. Most Biss come up with Auto Biss still those keys are not showed on the Softcam section. Autoroll of Power Vu on the GTCombo will works fine if you give the EMM AU keys so the box can look for them or if you have your channels ECM 00 and 01 you can add them and open the channels. There is always a work from your side, look or ask for keys and create your own softcam.key file. Some other models are beginning to have keys embedded to the firmware but GTC series don't
first of all thanks for your answers
If you are right, all the gt media boxes have autobiss but you can see you take out the softcam but this gt combo 4k you can't even see it, you get in, friend
Re: Gt Combo update
joviedop104 wrote: ↑Sat May 15, 2021 3:58 pmcpr43 wrote: ↑Sat May 15, 2021 3:38 pmTry renaming file to SoftCam.Key. S, C and K with capital letter. Remember , the GTcombo softcam file is very different from regular GTMedia models. You need to re-write your softcam file following enigma2 groupstanka wrote: ↑Sat May 15, 2021 3:28 pmI load the Cccam in no problem on the 3.0 usb port .The ( SoftCam) (softcam) file. I tray loading from the 3.0 usb port and the 2.0 usb rear .And I did CA informaton 6666 cs protocol softcam setting ok please wait and then 0 add 0 edit 0 delete. the red for import and export don't appear.I tray 3.0 usbs 5times and 2.0 usbs 5times at rear and no't able to load the file. At same time the v8uhd I loadin the same files no problem.The file are 22 kb .Any answers.Thank you
Menu
Installation
6666
Cs protocol
Oscam configuration
File storage will show up /storage/EA57-*A79/SoftCam.Key (S, C and K capital letter)
OK to check mark
Import (red)
Import Oscam Configuration Success message will show up
Exit
Reboot
Softcam.Key file guide, using satellite 30.0 west. You need to write each channel sid:
; Group 0x30w 30W channels:
P 00300029 00 00000000000000 ; cHANNEL nAME (oPTIONAL)
P 00300029 01 00000000000000 ; cHANNEL nAME (oPTIONAL)1
P 00300034 00 00000000000000 ; cHANNEL nAME (oPTIONAL)
P 00300034 01 00000000000000 ; cHANNEL nAME (oPTIONAL)
P 0030019B 00 00000000000000 ; cHANNEL nAME (oPTIONAL)
P 0030019B 01 00000000000000 ; cHANNEL nAME (oPTIONAL)
P 0030 xxxxxxxx XXXXXXXXXXXXXX ; EMM Key
P 0030 xxxxxxxx XXXXXXXXXXXXXX ; EMM Key
All the 00000000000000 will be filled once the autoroll founds the ECM keys using the EMM
Hi @ cpr43
In the GT media selling web page it is said that GT combo supports "Full Auto PowerVu, DRE &Biss key", just like V8 UHD I was expecting no to have to introduce any KEY manually.
@Tom.w Told me in this thread that those features are supported.
This means those features are not actually supported? will be supported in the future?
regards,
Johan
Hello Gtmedia .. thank you for your huge efforts .. but i can't get the key after the feed open .. even through softcam i can't .. can you resolve that ?
for example this feed has a key this:
7.0E
11011 V 7200
#Cw: xxxxxxxxxxxxxxxxxxx but does not appear in the box or by softcam
186997630_155721363180991_3034523015989256384_n.jpg
186474358_223920645783804_8593414637960022442_n.jpg
Re: Gt Combo update
faisal6 wrote: ↑Sat May 15, 2021 5:04 pmjoviedop104 wrote: ↑Sat May 15, 2021 3:58 pmcpr43 wrote: ↑Sat May 15, 2021 3:38 pmTry renaming file to SoftCam.Key. S, C and K with capital letter. Remember , the GTcombo softcam file is very different from regular GTMedia models. You need to re-write your softcam file following enigma2 groupstanka wrote: ↑Sat May 15, 2021 3:28 pmI load the Cccam in no problem on the 3.0 usb port .The ( SoftCam) (softcam) file. I tray loading from the 3.0 usb port and the 2.0 usb rear .And I did CA informaton 6666 cs protocol softcam setting ok please wait and then 0 add 0 edit 0 delete. the red for import and export don't appear.I tray 3.0 usbs 5times and 2.0 usbs 5times at rear and no't able to load the file. At same time the v8uhd I loadin the same files no problem.The file are 22 kb .Any answers.Thank you
Menu
Installation
6666
Cs protocol
Oscam configuration
File storage will show up /storage/EA57-*A79/SoftCam.Key (S, C and K capital letter)
OK to check mark
Import (red)
Import Oscam Configuration Success message will show up
Exit
Reboot
Softcam.Key file guide, using satellite 30.0 west. You need to write each channel sid:
; Group 0x30w 30W channels:
P 00300029 00 00000000000000 ; cHANNEL nAME (oPTIONAL)
P 00300029 01 00000000000000 ; cHANNEL nAME (oPTIONAL)1
P 00300034 00 00000000000000 ; cHANNEL nAME (oPTIONAL)
P 00300034 01 00000000000000 ; cHANNEL nAME (oPTIONAL)
P 0030019B 00 00000000000000 ; cHANNEL nAME (oPTIONAL)
P 0030019B 01 00000000000000 ; cHANNEL nAME (oPTIONAL)
P 0030 xxxxxxxx XXXXXXXXXXXXXX ; EMM Key
P 0030 xxxxxxxx XXXXXXXXXXXXXX ; EMM Key
All the 00000000000000 will be filled once the autoroll founds the ECM keys using the EMM
Hi @ cpr43
In the GT media selling web page it is said that GT combo supports "Full Auto PowerVu, DRE &Biss key", just like V8 UHD I was expecting no to have to introduce any KEY manually.
@Tom.w Told me in this thread that those features are supported.
This means those features are not actually supported? will be supported in the future?
regards,
Johan
Hello Gtmedia .. thank you for your huge efforts .. but i can't get the key after the feed open .. even through softcam i can't .. can you resolve that ?
for example this feed has a key this:
7.0E
11011 V 7200
#Cw: xxxxxxxxxxxxxxxxxx but does not appear in the box or by softcam
-
- Posts: 97
- Joined: Mon Jul 02, 2018 4:24 pm
- Location: Costa Rica
Re: Gt Combo update
So " Full PowerVu" means something different from " Full Auto PowerVu"?
I know that V8 UHD have " Full PowerVu" support and PowerVu channels open without having to ingress anything manually.
I is hard to know what to expect because there has not been any kind of official announcement in the forum about the new GTcombo model.
V8 UHD is cheaper and older than new GTcombo model. I would expect a new model to have the same support in terms of opening PoweVu and Biss channels. Since V8 UHD can do it automatically, I did have the impression that GT combo will also have the same support.
I'll test Autoroll in this new box, in the old model there were some TPs for which the box stop giving me new key, even with the correct settings for EMM.
Do you know if we will still need to do this process everytime the ECM keys changes?
1. Turn off other Readers, e.g. CCCAM, NewCam
2. Remove old generated keys
3. Reboot the SoftCam
4. Wait for the new keys to be generated
5. Restart the Readers that were turned-off in point 1
regards,
Johan
I know that V8 UHD have " Full PowerVu" support and PowerVu channels open without having to ingress anything manually.
I is hard to know what to expect because there has not been any kind of official announcement in the forum about the new GTcombo model.
V8 UHD is cheaper and older than new GTcombo model. I would expect a new model to have the same support in terms of opening PoweVu and Biss channels. Since V8 UHD can do it automatically, I did have the impression that GT combo will also have the same support.
I'll test Autoroll in this new box, in the old model there were some TPs for which the box stop giving me new key, even with the correct settings for EMM.
Do you know if we will still need to do this process everytime the ECM keys changes?
1. Turn off other Readers, e.g. CCCAM, NewCam
2. Remove old generated keys
3. Reboot the SoftCam
4. Wait for the new keys to be generated
5. Restart the Readers that were turned-off in point 1
regards,
Johan
Re: Gt Combo update
Johan
You do have a wrong impression. You will need to read and read again here and probably on the net. You are comparing 2 different thing. Enigma2 using Oscam and in this case Android is a completely process than close source and softcam.key files. I am sorry it is not what you expect. Never heard of your instructions. Recents changes on regular models adding keys to firmwares was a unique GTMedia designed. It was only until latelly that was implemented. So full auto power vu is not a market standard. We will be here to help in case you needed.
You do have a wrong impression. You will need to read and read again here and probably on the net. You are comparing 2 different thing. Enigma2 using Oscam and in this case Android is a completely process than close source and softcam.key files. I am sorry it is not what you expect. Never heard of your instructions. Recents changes on regular models adding keys to firmwares was a unique GTMedia designed. It was only until latelly that was implemented. So full auto power vu is not a market standard. We will be here to help in case you needed.
Re: Gt Combo update
You have already forgotten my queries Thankscpr43 wrote: ↑Sat May 15, 2021 9:29 pmJohan
You do have a wrong impression. You will need to read and read again here and probably on the net. You are comparing 2 different thing. Enigma2 using Oscam and in this case Android is a completely process than close source and softcam.key files. I am sorry it is not what you expect. Never heard of your instructions. Recents changes on regular models adding keys to firmwares was a unique GTMedia designed. It was only until latelly that was implemented. So full auto power vu is not a market standard. We will be here to help in case you needed.
Re: Gt Combo update
Please explain or send me a PMfaisal6 wrote: ↑Sat May 15, 2021 9:32 pmYou have already forgotten my queries Thankscpr43 wrote: ↑Sat May 15, 2021 9:29 pmJohan
You do have a wrong impression. You will need to read and read again here and probably on the net. You are comparing 2 different thing. Enigma2 using Oscam and in this case Android is a completely process than close source and softcam.key files. I am sorry it is not what you expect. Never heard of your instructions. Recents changes on regular models adding keys to firmwares was a unique GTMedia designed. It was only until latelly that was implemented. So full auto power vu is not a market standard. We will be here to help in case you needed.
Re: Gt Combo update
Thanks for answering. I've been explaining this for days: Greetings, where can I see the biss key of a feed when it does auto biss?faisal6 wrote: ↑Sat May 15, 2021 9:32 pmYou have already forgotten my queries Thankscpr43 wrote: ↑Sat May 15, 2021 9:29 pmJohan
You do have a wrong impression. You will need to read and read again here and probably on the net. You are comparing 2 different thing. Enigma2 using Oscam and in this case Android is a completely process than close source and softcam.key files. I am sorry it is not what you expect. Never heard of your instructions. Recents changes on regular models adding keys to firmwares was a unique GTMedia designed. It was only until latelly that was implemented. So full auto power vu is not a market standard. We will be here to help in case you needed.
Re: Gt Combo update
Try exporting from the oscam menu
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Gt Combo update
I explained before. Nowhere. Sorryfaisal6 wrote: ↑Sat May 15, 2021 9:58 pmThanks for answering. I've been explaining this for days: Greetings, where can I see the biss key of a feed when it does auto biss?faisal6 wrote: ↑Sat May 15, 2021 9:32 pmYou have already forgotten my queries Thankscpr43 wrote: ↑Sat May 15, 2021 9:29 pmJohan
You do have a wrong impression. You will need to read and read again here and probably on the net. You are comparing 2 different thing. Enigma2 using Oscam and in this case Android is a completely process than close source and softcam.key files. I am sorry it is not what you expect. Never heard of your instructions. Recents changes on regular models adding keys to firmwares was a unique GTMedia designed. It was only until latelly that was implemented. So full auto power vu is not a market standard. We will be here to help in case you needed.
-
- Posts: 97
- Joined: Mon Jul 02, 2018 4:24 pm
- Location: Costa Rica
Re: Gt Combo update
Hi cpr43,cpr43 wrote: ↑Sat May 15, 2021 9:29 pmJohan
You do have a wrong impression. You will need to read and read again here and probably on the net. You are comparing 2 different thing. Enigma2 using Oscam and in this case Android is a completely process than close source and softcam.key files. I am sorry it is not what you expect. Never heard of your instructions. Recents changes on regular models adding keys to firmwares was a unique GTMedia designed. It was only until latelly that was implemented. So full auto power vu is not a market standard. We will be here to help in case you needed.
That is how I used to do Autoroll for PowerVu in old GTC model.
regards,
Johan
Re: Gt Combo update
I was going to buy one of these boxes, but after reading all the comments I will decline... thank you. It seems it is using the same old Oscam version as the GTC, which will not open some transponders, even with a valid ECM they will not open. And it seems the access to the Oscam has been restricted so not to allow viewing of the keys. I feel sorry for the customers who thought they were getting something of value.
Re: Gt Combo update
You are right A better 20 Euro gtmedia v7 The Gt combo the truth I feel cheatedJC28 wrote: ↑Mon May 17, 2021 3:46 amI was going to buy one of these boxes, but after reading all the comments I will decline... thank you. It seems it is using the same old Oscam version as the GTC, which will not open some transponders, even with a valid ECM they will not open. And it seems the access to the Oscam has been restricted so not to allow viewing of the keys. I feel sorry for the customers who thought they were getting something of value.
Re: Gt Combo update
There are boxes is Android and they carry oscam they have eutobiss and you can see the key And gt combo nothing
Re: Gt Combo update
hello
Thank you very much for your feedback.
we will update the auto biss/auto power Vu function as the same as v8uhd.
please give us some time,we will release the firmware asap.
Thank you very much for your feedback.
we will update the auto biss/auto power Vu function as the same as v8uhd.
please give us some time,we will release the firmware asap.
Re: Gt Combo update
Thank you very much for answering Aces it is the best job The V8UHD you can see the key but not gtcombo
-
- Posts: 97
- Joined: Mon Jul 02, 2018 4:24 pm
- Location: Costa Rica
-
- Posts: 46
- Joined: Mon Apr 02, 2018 4:53 pm
Re: Gt Combo update
Were you available of open 4:2:2 channels?tanka wrote: ↑Fri May 14, 2021 8:10 pmI have the GT Combo For 4 days and IPTV better and very good no problems About the satellite Blind Scan for now slow and freezes at 105 west 70% scan freezes at 00981.00mhz 4168mhz. V8UHD faster in all scans.Butt only few firmware.The combo will be one good box.I only setup the IPTV and the Satellites for now.Important At the west satellites from 133w to 55.5 west and Hispansat all Powervu channels are encrypted The biss keys no problem did need to repair that.I have to learning to import that Softcam and the cccam
Re: Gt Combo update
not for now ABC are 4.2.2 At 91 west ku .I check for you I have strong signal and few TPS for Fox 59 feed good signal. ABC are only feeds did have about 24 TPS And no signal before working. All 4.2.2
Re: Gt Combo update
fjlv1972 wrote: ↑Thu May 13, 2021 6:49 pmes mas lenta, problemas cambio de canales, se congelado, no cambia canales entre satelites, mas testarudo que el GTC, escaneas y se queda congelado
no actualizen la anterior buscaba las biss, en esta no, pense que seria una mejor version mejorando por mucho al GTC, ojala mejoren
It is slower, problems changing channels, it is frozen, it does not change channels between satellites, more stubborn than the GTC, you scan and it stays frozen
They do not update the previous one I was looking for the biss, in this one, I thought it would be a better version improving the GTC by a lot, hopefully they improve, xxxxxxxxx Yes canales congelar mucho no cambiar tambem.New box give time .Few more months and the box much better.I oop.
Re: Gt Combo update
Hi there is still no update for the biss key issue does not seem Thanks
Re: Gt Combo update
Llego mi GT Combo le puse la última actualización desde Ota y tiene varios errores
No cambia de canal entre satélites
No hace autorroll en powervu ni Biss
Se bloquea al hacer búsqueda Ciega
Y otros errores más
Aún así es un equipo que con mejoras será un excelente equipo
No cambia de canal entre satélites
No hace autorroll en powervu ni Biss
Se bloquea al hacer búsqueda Ciega
Y otros errores más
Aún así es un equipo que con mejoras será un excelente equipo
Satélites Actualmente en Uso
Banda C 40.5W / 43.1W / 55.5W
Banda KU 30W / 61W / 67W / 70W / 81W / 117W
Receptores Satelitales en Casa
GT Media V8X / V8 UHD / GT Combo / Azamerica S2015 / Miuibox GT
Banda C 40.5W / 43.1W / 55.5W
Banda KU 30W / 61W / 67W / 70W / 81W / 117W
Receptores Satelitales en Casa
GT Media V8X / V8 UHD / GT Combo / Azamerica S2015 / Miuibox GT