GTMEDIA Forum

OK, fixed the issue. Install the update zip file onto a USB thumbdrive, no need to unzip it. Backup your DB file, Menu>installation>DB management>export DVB data. Put thumbdrive into the side of the box. then, Home>APPS>(go down to update)update> choose local update and check the two radio buttons. ...

"In my GT MEDIA Combo, I scan a satellite, it manages to detect channels but it does not show them in the menu, this error happened after updating" I have this same issue after updating. I also removed all transponders from one satellite, blind scanned them, the satellite does not show back up under...

It's biss2

Is this transponder with Viaccess possible?

Sounds good to me!

Wasn't someone from Freesat looking for a 4:2:2 H.265 recording for 4:2:2 H.265 testing?

OK will do!

3939V sr 34282 S2 16APSK FEC 5/6 CA System ID: 4112 (0x1010) Tandberg Television Stream Type: 0x24 H.265 Video Audio: Dolby AC3 and Mpeg 1 PMT PID 16 (0x0010) - Network PMT PID 1001 (0x03e9) - Program 1 SERVICIO1 C2 HD HEVC PMT PID 1002 (0x03ea) - Program 2 SERVICIO2 C5 HD HEVC PMT PID 1003 (0x03eb)...

Sorry for the delay, work got in the way.
I just ran the recording thru a TS analyzer.
Unfortunately it is H.264 4.2.2 BISS

I have seen those 4K feeds before, once sports come back I should be
able to find them again.

Oh yes there are. Feeds and encrypted.
I'll have to look but I think I have one recorded that is BISS, and I have the key.

Nice, will be looking forward to this one.

OK, just scanned 12080H, it's the same provider, the scan also stops at 36%

OK, 76cm dish works just fine, with a clean blindscan the box gets stuck on 12040H,
I then selected to just scan this transponder and it gets stuck at 36%

TS file PM'ed

I just PM'ed you the file link as well.

I might have a tree in the way, let me check. Ya there is a tree limb in the way. It's my tree but it is overhanging in my neighbors yard. I get along with my neighbor, we talked about cutting limbs last winter and I'm in the process of trimming the tree. Should be clear in a few weeks. I'll keep yo...

Alex, I sent you a PM with a link

I recorded the transport stream, this is what is there These are radio channels: PAT Version Number: 11 Transport Stream ID: 3 (0x0003) NIT: 0.3W 1.162 GHz Horizontal 2000 3/4 QPSK, DVB-S2 (a=.35) PMT PID 16 (0x0010) - Network PMT PID 128 (0x0080) - Program 1 NPR-ME PMT PID 128 (0x0080) - Program 2 ...

Loaded North American Sat list, all is well.

It really depends whats in the stream, so yes it can take a few minutes. Some streams may not be gotten due to the way the "uplinker" has configured
the stream. I've seen this in North America. Unless there is a way of achieving this that I don't know about.

Received my receiver yesterday, very nice. Did a quick setup on 103w C band.
Testing the Auto feature. Impressive, a little patience and "Bob's your Uncle"

Moved onto 101w with the same result but of course the receiver is not 4K, so
no video but audio is there. Very quick. Nice job guys!

There are about 28 radio channels on 11912V, Groove Distribution, so I don't expect the services to move anytime soon.
The receiver might think its video.

The receiver comes to a grinding halt as soon as it tries to scan in 11912V at a symbolrate of 2000 which just happens to be at 65% scan. On my TBS5927 I can watch and see when this transponder turns off, when that happens the receiver will scan all the way thru. Would be nice if we could adjust the...

It was at 131W 3900H might have gone to fiber like SportsNet on 91W

Actually........ In this case, there are several satellites in the area of 103W. As in most orbital slots. NATO 2A - 103.58W inclined approx. +5 degrees (50 years old) SES3 - 102.97W on plain (9 years old) DirecTV 15 - 102.84W on plain (5 years old) DirecTV 12 - 102.78W on plain (11years old) DirecT...

Thank you so much, your the bomb.