Recovery v8 super
Moderators: admin, GTMedia Team
Recovery v8 super
Hello my friends! Im from Brazil, and my client has bought an v8 super from china, do you guys have the recovery archives, he tried do update anda now the decoder does not turn on
Re: Recovery v8 super
You can get the correct newest V8 Super Firmware here:
http://freesat.cn/forum/viewtopic.php?f=40&t=10
Download the correct file then do this. First uncompress the file.
1. Rename the BIN file to flash.bin
2. Unplug the power from the box.
3. Put flash.bin on a USB stick and put it in the receiver.
4. Point the remote at the receiver and hit Menu over and over then power the box on.
5. Keep hitting menu util you see "USB UPDATE! DO NOT POWER OFF" on the screen.
6. Wait for the box to reboot. Do not power it off until it reboots.
That should fix it.
http://freesat.cn/forum/viewtopic.php?f=40&t=10
Download the correct file then do this. First uncompress the file.
1. Rename the BIN file to flash.bin
2. Unplug the power from the box.
3. Put flash.bin on a USB stick and put it in the receiver.
4. Point the remote at the receiver and hit Menu over and over then power the box on.
5. Keep hitting menu util you see "USB UPDATE! DO NOT POWER OFF" on the screen.
6. Wait for the box to reboot. Do not power it off until it reboots.
That should fix it.
Re: Recovery v8 super
I dont know the exact model of the decoder. It says super on the right corner, anda on the left its writen V8 in glod letters.. Which model is it..?
Re: Recovery v8 super
This is how it looks exactly like
- Attachments
-
- This is my decoder..
- 1471014767872672547952.jpg (3.5 MiB) Viewed 5743 times
Re: Recovery v8 super
i have a problem i try to flash my v8 super box and it start and then just stay boot and doing noting, what should I do then.
-
- 网站管理员
- Posts: 667
- Joined: Thu Aug 11, 2016 10:58 am
- Location: Thailand
Re: Recovery v8 super
You must flash ROM with RS232 cable again by computer.
-
- Posts: 3
- Joined: Fri Sep 02, 2016 12:40 pm
Re: Recovery v8 super
What is the correct cable to use. The v8 has a 3.5 mm rs232 port. I've seen different types of plugs online.
-
- 网站管理员
- Posts: 667
- Joined: Thu Aug 11, 2016 10:58 am
- Location: Thailand
Re: Recovery v8 super
MiniJack RS232 Cable for upload firmware (v8 Super)