Biss key not work when I turn off and restart my device GTMEDIA V7SX2

Please discuss the softcam feature ,share the softcam key...

Moderators: admin, GTMedia Team

Post Reply
Dj2bled
Posts: 1
Joined: Fri Nov 26, 2021 10:24 am

Biss key not work when I turn off and restart my device GTMEDIA V7SX2

Post by Dj2bled »

Why does it not work? I the biss key always have a GTMEDIA V7SX2 Every time I turn off the device, and after I turn it on again, it asks me to decode the channels that were previously encrypted.

User avatar
cpr43
网站管理员
Posts: 6532
Joined: Thu Aug 11, 2016 1:41 pm

Re: Biss key not work when I turn off and restart my device GTMEDIA V7SX2

Post by cpr43 »

Dj2bled wrote:
Fri Nov 26, 2021 10:39 am
Why does it not work? I the biss key always have a GTMEDIA V7SX2 Every time I turn off the device, and after I turn it on again, it asks me to decode the channels that were previously encrypted.
It is internet connected?? See the keys total on your CA section including PowerVu. If you have more than 1,000 all new one will be gone after a reset. You should make room deleting some older ones.
ImageImage

lumpert
Posts: 2
Joined: Thu Nov 24, 2022 1:43 am

Re: Biss key not work when I turn off and restart my device GTMEDIA V7SX2

Post by lumpert »

I have the same problem or a similar problem with the V7SX2. I enter the BISS key and it remembers it, but when I reboot it doesn't use the key unless I manually visit the "Key Edit" screen (I don't need to re-enter it). After visiting the Key Edit screen, I can visit the channel and it will decode the video.

I've updated the firmware to the latest version. I tried exporting and reimporting the BISS key using the softcam.key file. I don't have 1000 keys as suggested above.

Is there any way to get this to work automatically after rebooting without connecting to the internet?

Thanks.

lumpert
Posts: 2
Joined: Thu Nov 24, 2022 1:43 am

Re: Biss key not work when I turn off and restart my device GTMEDIA V7SX2

Post by lumpert »

Is this a bug or is this the way the device is supposed to work? It is pretty inconvenient to have to go to settings, press the secret number, and go to the Key Edit screen every time after turning on the device to get a channel to decrypt.

Reading in the forum, it sounds like this is an issue on other models as well? Are there any models that don't need to check the internet or manually go to the Key Edit screen after booting?

Is there any plan to fix this in a future firmware release?

Thanks.

User avatar
cpr43
网站管理员
Posts: 6532
Joined: Thu Aug 11, 2016 1:41 pm

Re: Biss key not work when I turn off and restart my device GTMEDIA V7SX2

Post by cpr43 »

lumpert wrote:
Fri Nov 25, 2022 9:14 am
Is this a bug or is this the way the device is supposed to work? It is pretty inconvenient to have to go to settings, press the secret number, and go to the Key Edit screen every time after turning on the device to get a channel to decrypt.

Reading in the forum, it sounds like this is an issue on other models as well? Are there any models that don't need to check the internet or manually go to the Key Edit screen after booting?

Is there any plan to fix this in a future firmware release?

Thanks.
As I mentioned before probably the store room is getting full. try this, delete all the keys and leave only this latest one. re-boot the box and check if it was erase?
ImageImage

Post Reply