Softcam key format specification

[alex.c]

V7 V8 V9 serial models.
1. About PowerVu keys
Supported format:
EMM key format: P 00XXXXXX 00 XXXXXXXXXXXXXX ;
ECM key format: P XXXX 00 XXXXXXXXXXXXXX ;
P XXXX 01 XXXXXXXXXXXXXX ;

Not Supported format:
P 00XXXXXX 6DXXXXXXXXXXF8 ; Wrong EMM key format. You need to insert 00 before 6D.
P 0000 00XXXX11 D8XXXXXXXXXX2C ; Wrong EMM key format. You need delete 0000 and insert 00 before D8.
New format, but not support:
P 0030XXXX 00 19XXXXXXXXXX77 ; Wrong ECM key format. You need delete 0030.
P 0030XXXX 01 1DXXXXXXXXXXA0 ; Wrong ECM key format. You need delete 0030.
P 0030 00XXXXXX 8FXXXXXXXXXX18 ; Wrong EMM key format. You need delete 0030 and insert 00 before 8F.
This new format has a group id in every keys. So it is not supported by V7 V8 and V9 serial traditional models.
But it is supported by Android GT serial models.
2. About BISS keys
Standard supported format:
F XXXX1FFF 00 XXXXXXXXXXXXXXXX ;
F XXXX1FFF 01 XXXXXXXXXXXXXXXX ;
F XXXXXXXX 00 XXXXXXXXXXXXXXXX ;
F XXXXXXXX 01 XXXXXXXXXXXXXXXX ;
Not standard, but supported format:
B XXXX DDDDD:DDDDD:H XXXXXXXXXXXXXXXX ;
B XXXX DDDDD:DDDDD:V XXXXXXXXXXXXXXXX ;
XXXX: hexadecimal service id
DDDDD: decimal frequency and symbal rate
H/V: Polarity
3. Other keys are all standard

I will keep updating this guidance. It is welcome to correct me if there is something wrong.

[Feralkiwi]

There is an instruction here about powervu keys .

Owen

[alex.c]

There is an instruction here about powervu keys .

Owen

Yes, I don't find a guidance for Softcam key easily. So I wrote a new one try to help.
And about this format :
P 0000 00 5BXXXXXXXXXXBD;259028000:H ; DirecTV
P 0000 01 96XXXXXXXXXX8F;259028000:H ; DirecTV
I don't suggest to use this format. It is generated by Powervu auto roll.
Actually the longitude parameter of 259028000:H is not used, so this format of key will be check by all channels. Although it works, by it may slower the speed of open screen.
Please add use SID when you import keys manually.

[Feralkiwi]

There is an instruction here about powervu keys .

Owen

Yes, I don't find a guidance for Softcam key easily. So I wrote a new one try to help.
And about this format :
P 0000 00 5BXXXXXXXXXXBD;259028000:H ; DirecTV
P 0000 01 96XXXXXXXXXX8F;259028000:H ; DirecTV
I don't suggest to use this format. It is generated by Powervu auto roll.
Actually the longitude parameter of 259028000:H is not used, so this format of key will be check by all channels. Although it works, by it may slower the speed of open screen.
Please add use SID when you import keys manually.

Thanks for the update. It was some time ago I wrote that for the V8Golden.

Owen

[cpr43]

V7 V8 V9 serial models.
1. About PowerVu keys
Supported format:
EMM key format: P 00XXXXXX 00 XXXXXXXXXXXXXX ;
ECM key format: P XXXX 00 XXXXXXXXXXXXXX ;
P XXXX 01 XXXXXXXXXXXXXX ;

Not Supported format:
P 00XXXXXX 6DXXXXXXXXXXF8 ; Wrong EMM key format. You need to insert 00 before 6D.
P 0000 00XXXX11 D8XXXXXXXXXX2C ; Wrong EMM key format. You need delete 0000 and insert 00 before D8.
New format, but not support:
P 0030XXXX 00 19XXXXXXXXXX77 ; Wrong ECM key format. You need delete 0030.
P 0030XXXX 01 1DXXXXXXXXXXA0 ; Wrong ECM key format. You need delete 0030.
P 0030 00XXXXXX 8FXXXXXXXXXX18 ; Wrong EMM key format. You need delete 0030 and insert 00 before 8F.
This new format has a group id in every keys. So it is not supported by V7 V8 and V9 serial traditional models.
But it is supported by Android GT serial models.
2. About BISS keys
Standard supported format:
F XXXX1FFF 00 XXXXXXXXXXXXXXXX ;
F XXXX1FFF 01 XXXXXXXXXXXXXXXX ;
F XXXXXXXX 00 XXXXXXXXXXXXXXXX ;
F XXXXXXXX 01 XXXXXXXXXXXXXXXX ;
Not standard, but supported format:
B XXXX DDDDD:DDDDD:H XXXXXXXXXXXXXXXX ;
B XXXX DDDDD:DDDDD:V XXXXXXXXXXXXXXXX ;
XXXX: hexadecimal service id
DDDDD: decimal frequency and symbal rate
H/V: Polarity
3. Other keys are all standard

I will keep updating this guidance. It is welcome to correct me if there is something wrong.

I can not make it work using this format on the GtMedia V9 Super, already sent results to Lining. Please take a look. Adding not real working keys sample after each 1, 2 will help.

[alex.c]

V7 V8 V9 serial models.
1. About PowerVu keys
Supported format:
EMM key format: P 00XXXXXX 00 XXXXXXXXXXXXXX ;
ECM key format: P XXXX 00 XXXXXXXXXXXXXX ;
P XXXX 01 XXXXXXXXXXXXXX ;

Not Supported format:
P 00XXXXXX 6DXXXXXXXXXXF8 ; Wrong EMM key format. You need to insert 00 before 6D.
P 0000 00XXXX11 D8XXXXXXXXXX2C ; Wrong EMM key format. You need delete 0000 and insert 00 before D8.
New format, but not support:
P 0030XXXX 00 19XXXXXXXXXX77 ; Wrong ECM key format. You need delete 0030.
P 0030XXXX 01 1DXXXXXXXXXXA0 ; Wrong ECM key format. You need delete 0030.
P 0030 00XXXXXX 8FXXXXXXXXXX18 ; Wrong EMM key format. You need delete 0030 and insert 00 before 8F.
This new format has a group id in every keys. So it is not supported by V7 V8 and V9 serial traditional models.
But it is supported by Android GT serial models.
2. About BISS keys
Standard supported format:
F XXXX1FFF 00 XXXXXXXXXXXXXXXX ;
F XXXX1FFF 01 XXXXXXXXXXXXXXXX ;
F XXXXXXXX 00 XXXXXXXXXXXXXXXX ;
F XXXXXXXX 01 XXXXXXXXXXXXXXXX ;
Not standard, but supported format:
B XXXX DDDDD:DDDDD:H XXXXXXXXXXXXXXXX ;
B XXXX DDDDD:DDDDD:V XXXXXXXXXXXXXXXX ;
XXXX: hexadecimal service id
DDDDD: decimal frequency and symbal rate
H/V: Polarity
3. Other keys are all standard

I will keep updating this guidance. It is welcome to correct me if there is something wrong.

I can not make it work using this format on the GtMedia V9 Super, already sent results to Lining. Please take a look. Adding not real working keys sample after each 1, 2 will help.

Yes, maybe this not work on V9 Super, we will fix it ASAP.

[cpr43]

V7 V8 V9 serial models.
1. About PowerVu keys
Supported format:
EMM key format: P 00XXXXXX 00 XXXXXXXXXXXXXX ;
ECM key format: P XXXX 00 XXXXXXXXXXXXXX ;
P XXXX 01 XXXXXXXXXXXXXX ;

Not Supported format:
P 00XXXXXX 6DXXXXXXXXXXF8 ; Wrong EMM key format. You need to insert 00 before 6D.
P 0000 00XXXX11 D8XXXXXXXXXX2C ; Wrong EMM key format. You need delete 0000 and insert 00 before D8.
New format, but not support:
P 0030XXXX 00 19XXXXXXXXXX77 ; Wrong ECM key format. You need delete 0030.
P 0030XXXX 01 1DXXXXXXXXXXA0 ; Wrong ECM key format. You need delete 0030.
P 0030 00XXXXXX 8FXXXXXXXXXX18 ; Wrong EMM key format. You need delete 0030 and insert 00 before 8F.
This new format has a group id in every keys. So it is not supported by V7 V8 and V9 serial traditional models.
But it is supported by Android GT serial models.
2. About BISS keys
Standard supported format:
F XXXX1FFF 00 XXXXXXXXXXXXXXXX ;
F XXXX1FFF 01 XXXXXXXXXXXXXXXX ;
F XXXXXXXX 00 XXXXXXXXXXXXXXXX ;
F XXXXXXXX 01 XXXXXXXXXXXXXXXX ;
Not standard, but supported format:
B XXXX DDDDD:DDDDD:H XXXXXXXXXXXXXXXX ;
B XXXX DDDDD:DDDDD:V XXXXXXXXXXXXXXXX ;
XXXX: hexadecimal service id
DDDDD: decimal frequency and symbal rate
H/V: Polarity
3. Other keys are all standard

I will keep updating this guidance. It is welcome to correct me if there is something wrong.

I can not make it work using this format on the GtMedia V9 Super, already sent results to Lining. Please take a look. Adding not real working keys sample after each 1, 2 will help.

Yes, maybe this not work on V9 Super, we will fix it ASAP.

Excellent!! Thank you!!!