GTMEDIA D2 Firmware(13/06/2019)

This zone is for some friends to experience new firmware or new box.

Moderators: admin, GTMedia Team

Post Reply
juergenoberau
Posts: 2
Joined: Wed Aug 28, 2019 11:29 am

GTMEDIA D2 Firmware(13/06/2019)

Post by juergenoberau » Wed Aug 28, 2019 11:34 am

I alway get the message no File on SD Card... it shows the folder but not the extracted file

Wat to do

anne12
Posts: 1
Joined: Wed Aug 28, 2019 8:22 pm
Contact:

Re: GTMEDIA D2 Firmware(13/06/2019)

Post by anne12 » Wed Aug 28, 2019 8:24 pm

I have the same problem, what could be going on?

juergenoberau
Posts: 2
Joined: Wed Aug 28, 2019 11:29 am

Re: GTMEDIA D2 Firmware(13/06/2019)

Post by juergenoberau » Mon Sep 02, 2019 2:06 pm

juergenoberau wrote:
Wed Aug 28, 2019 11:34 am
I alway get the message no File on SD Card... it shows the folder but not the extracted file

Wat to do

afer fiew days no reacton from this company...

digitalfranz
Posts: 1
Joined: Fri Sep 06, 2019 8:28 am

Re: GTMEDIA D2 Firmware(13/06/2019)

Post by digitalfranz » Fri Sep 06, 2019 7:42 pm

Hi everybody!

I was trying to updare D2 FW...
BUT
instructions says--> "USB connection to the computer---press the Menu button at the same time, enter the upgrade interface and release the button"

What does it means? I have connected radio to pc, pressed menu button (same time...what means?) because i have tried to press menu button when inserted USB to PC (radio already connected, of course) BUT my PC doesn'ty enter in D2 mobile disk....where (if) am i wrong with sequence?

Thanks 4 reading and possible explanation...

RMSCOM
Posts: 1
Joined: Thu Aug 29, 2019 12:01 pm

Re: GTMEDIA D2 Firmware(13/06/2019)

Post by RMSCOM » Mon Sep 16, 2019 9:28 pm

Hi,
I was having the same problem until I tried pressing the "Func" button rather than "Menu" - then it worked!

Revised instructions:
1. Ensure radio is OFF
2. Connect USB cable to radio and PC
3. Press and hold FUNC button and while doing that, switch radio on (to "Music")
4. Radio will display message to confirm we are now in firmware update mode
5. Look for the new connected USB drive on your PC
6. Drag & drop the firmware update file onto this drive and wait until it has copied over completely
7. When the copy has finished, EJECT the USB drive
8. Radio will display a message showing the firmware update is in progress and then it will reboot
DONE :D

nai02ilu
Posts: 1
Joined: Tue Sep 24, 2019 3:27 pm
Contact:

Re: GTMEDIA D2 Firmware(13/06/2019)

Post by nai02ilu » Tue Sep 24, 2019 3:31 pm

RMSCOM wrote:
Mon Sep 16, 2019 9:28 pm
Hi,
I was having the same problem until I tried pressing the "Func" button rather than "Menu" - then it worked!

Revised instructions:
1. Ensure radio is OFF
2. Connect USB cable to radio and PC
3. Press and hold FUNC button and while doing that, switch radio on (to "Music")
4. Radio will display message to confirm we are now in firmware update mode
5. Look for the new connected USB drive on your PC
6. Drag & drop the firmware update file onto this drive and wait until it has copied over completely
7. When the copy has finished, EJECT the USB drive
8. Radio will display a message showing the firmware update is in progress and then it will reboot
DONE :D
Thank you, brother. It worked for me.

mare-di-alboran
Posts: 1
Joined: Mon Oct 21, 2019 3:56 pm

Re: GTMEDIA D2 Firmware(13/06/2019)

Post by mare-di-alboran » Mon Oct 21, 2019 4:14 pm

Dear All,

I would like to report my experience with D2 firmware dated 13/06/2019 and to suggest some improvement:

- when I switch on the radio (usually in DAB) the initial volume is very loud; please, let the radio start with the last volume listened when switched off;
- the minimum volume (level 01) is far too loud; you cannot listen to the radio when someone is sleeping beside you; please, add more volume steps to permit also very quiet sound levels;
- the option to auto-adjust time and date with info from the broadcaster is not available at all, even though it is described in the instructions booklet;
- 5 preset stations are too few; to overcome the limitation of only 5 physical buttons, stations form 6 to 10 could be recalled with a quick double-pushing of the same button (double-pushing key 1 = preset 6, double-pushing key 2 = preset 7 and so on);
- bluetooth audio streaming: the display doesn't show anything useful; it should not be difficult to show artist/album/song title/time and album cover as received by the music transmitter (i.e. the smartphone).

What do you think, fellow users? Have you experienced the same issues? Do you agree with the improvements listed here?

Dear developers, do you think that my requests could be implemented? Why are you going to release a new firmware?
Thanks.

luciacute
Posts: 1
Joined: Mon Oct 21, 2019 5:35 pm
Contact:

Re: GTMEDIA D2 Firmware(13/06/2019)

Post by luciacute » Mon Oct 21, 2019 5:40 pm

mare-di-alboran wrote:
Mon Oct 21, 2019 4:14 pm
Dear All,

I would like to report my experience with D2 firmware dated 13/06/2019 and to suggest some improvement:

- when I switch on the radio (usually in DAB) the initial volume is very loud; please, let the radio start with the last volume listened when switched off;
- the minimum volume (level 01) is far too loud; you cannot listen to the radio when someone is sleeping beside you; please, add more volume steps to permit also very quiet sound levels;
- the option to auto-adjust time and date with info from the broadcaster is not available at all, even though it is described in the instructions booklet;
- 5 preset stations are too few; to overcome the limitation of only 5 physical buttons, stations form 6 to 10 could be recalled with a quick double-pushing of the same button (double-pushing key 1 = preset 6, double-pushing key 2 = preset 7 and so on);
- bluetooth audio streaming: the display doesn't show anything useful; it should not be difficult to show artist/album/song title/time and album cover as received by the music transmitter (i.e. the smartphone).

What do you think, fellow users? Have you experienced the same issues? Do you agree with the improvements listed here?

Dear developers, do you think that my requests could be implemented? Why are you going to release a new firmware?
Thanks.
Hi, I agree with your improvements .

ronnyalpes
Posts: 1
Joined: Fri Oct 25, 2019 1:38 pm
Contact:

Re: GTMEDIA D2 Firmware(13/06/2019)

Post by ronnyalpes » Fri Oct 25, 2019 1:39 pm

luciacute wrote:
Mon Oct 21, 2019 5:40 pm
mare-di-alboran wrote:
Mon Oct 21, 2019 4:14 pm
Dear All,

I would like to report my experience with D2 firmware dated 13/06/2019 and to suggest some improvement:

- when I switch on the radio (usually in DAB) the initial volume is very loud; please, let the radio start with the last volume listened when switched off;
- the minimum volume (level 01) is far too loud; you cannot listen to the radio when someone is sleeping beside you; please, add more volume steps to permit also very quiet sound levels;
- the option to auto-adjust time and date with info from the broadcaster is not available at all, even though it is described in the instructions booklet;
- 5 preset stations are too few; to overcome the limitation of only 5 physical buttons, stations form 6 to 10 could be recalled with a quick double-pushing of the same button (double-pushing key 1 = preset 6, double-pushing key 2 = preset 7 and so on);
- bluetooth audio streaming: the display doesn't show anything useful; it should not be difficult to show artist/album/song title/time and album cover as received by the music transmitter (i.e. the smartphone).

What do you think, fellow users? Have you experienced the same issues? Do you agree with the improvements listed here?

Dear developers, do you think that my requests could be implemented? Why are you going to release a new firmware?
Thanks.
Hi, I agree with your improvements .
x2

Post Reply