v8 finder meter sq quality different from decoder

V8 FINDER - METER DVBS/DVBS2/DVBS2X
------------------------------------------------------------------------
V8 FINDER - BT03 DVBS/DVBS2
------------------------------------------------------------------------
V8 FINDER - V71 DVBS/DVBS2

Moderators: admin, GTMedia Team

Hans_Rey
Posts: 19
Joined: Wed Oct 03, 2018 10:04 pm

v8 finder meter sq quality different from decoder

Post by Hans_Rey » Thu Apr 11, 2019 7:20 am

Hello
One my of my friend recently bought v8 finder meter. He figure out that signal quality shown at the device far below from the signal quality shown at decoder. Anyone facing the similar issue with this device?
Attachments
Screenshot_20190411-151759_Messenger.jpg
Screenshot_20190411-151759_Messenger.jpg (615.67 KiB) Viewed 1730 times

Hans_Rey
Posts: 19
Joined: Wed Oct 03, 2018 10:04 pm

Re: v8 finder meter sq quality different from decoder

Post by Hans_Rey » Thu Apr 11, 2019 7:22 am

2nd picture here
Attachments
Screenshot_20190411-152047_Messenger.jpg
Screenshot_20190411-152047_Messenger.jpg (675.92 KiB) Viewed 1729 times

Hans_Rey
Posts: 19
Joined: Wed Oct 03, 2018 10:04 pm

Re: v8 finder meter sq quality different from decoder

Post by Hans_Rey » Thu Apr 11, 2019 11:28 am

Even after upgrade to the latest sw, still no changes. Hope gtmedia team can fix this soon.
Attachments
Screenshot_20190411-192403_Messenger.jpg
Screenshot_20190411-192403_Messenger.jpg (644.64 KiB) Viewed 1704 times
Screenshot_20190411-192348_Messenger.jpg
Screenshot_20190411-192348_Messenger.jpg (625.44 KiB) Viewed 1704 times

Marcelo 10
Posts: 9
Joined: Sun Mar 18, 2018 7:30 pm

Re: v8 finder meter sq quality different from decoder

Post by Marcelo 10 » Sat Apr 13, 2019 11:43 am

Sim !! Comprei um desse V8 meter dourado. E não está dando sinal de qualidade em satélites CCM tipo 70w.
Agora nos transponder ACM só está dando sinal em alguns transponder do 58 w em ACM.
Agora nos transponder ACM dos satélites SES 4 22w. TELSTAR 14R 63w. AMAZONAS 61w. HISPASAT 30w. E os demais satélite com TP ACM sem chance não dá sinal.... Isso tem que ser corrigido o mais rápido possível. Por favor ! Peço por gentileza para team, olhar para os possíveis problema, a ser corrigido o mais rápido possível. Pelo nome da marca GT MIDIA que sou cliente a muito tempo. É pelos usuários deste produto V8 meter...

denxdenis
Posts: 3
Joined: Fri Apr 12, 2019 1:24 pm

Re: v8 finder meter sq quality different from decoder

Post by denxdenis » Fri Apr 19, 2019 2:14 pm

проблема так и не решилась?
Тоже такие приборы купили и все с такой проблемой

Ncaa1976*
Posts: 9
Joined: Sun Mar 24, 2019 11:29 pm

Re: v8 finder meter sq quality different from decoder

Post by Ncaa1976* » Sat Apr 20, 2019 9:47 pm

does it works???

rogerio_rodrigues
Posts: 22
Joined: Wed Feb 13, 2019 12:14 pm

Re: v8 finder meter sq quality different from decoder

Post by rogerio_rodrigues » Sun Apr 21, 2019 12:14 am

Marcelo 10 wrote:
Sat Apr 13, 2019 11:43 am
Sim !! Comprei um desse V8 meter dourado. E não está dando sinal de qualidade em satélites CCM tipo 70w.
Agora nos transponder ACM só está dando sinal em alguns transponder do 58 w em ACM.
Agora nos transponder ACM dos satélites SES 4 22w. TELSTAR 14R 63w. AMAZONAS 61w. HISPASAT 30w. E os demais satélite com TP ACM sem chance não dá sinal.... Isso tem que ser corrigido o mais rápido possível. Por favor ! Peço por gentileza para team, olhar para os possíveis problema, a ser corrigido o mais rápido possível. Pelo nome da marca GT MIDIA que sou cliente a muito tempo. É pelos usuários deste produto V8 meter...
Marcelo, vc lembrou de trocar a região do aparelho pra mudar de satélite... Vai ter que fazer toda hora que for apontar...
Attachments
Screenshot_20190420-211056.png
Screenshot_20190420-211056.png (365.59 KiB) Viewed 1442 times

viva1977
Posts: 3
Joined: Mon Apr 22, 2019 8:37 am

Re: v8 finder meter sq quality different from decoder

Post by viva1977 » Mon Apr 22, 2019 8:41 am

denxdenis wrote:
Fri Apr 19, 2019 2:14 pm
проблема так и не решилась?
Тоже такие приборы купили и все с такой проблемой
Привет, как ты редактируеш каналы?

viva1977
Posts: 3
Joined: Mon Apr 22, 2019 8:37 am

Re: v8 finder meter sq quality different from decoder

Post by viva1977 » Mon Apr 22, 2019 8:54 am

When will the new software where you need to improve the signal quality and make the channel editor

slim
Posts: 6
Joined: Tue Apr 23, 2019 8:00 pm

Re: v8 finder meter sq quality different from decoder

Post by slim » Tue Apr 23, 2019 8:10 pm

Hello all

Unfortunately the newest update (04/23/2019) of this V8 meter hasn't corrected the signal real value. It remains like in the previous versions. Please correct it in the next update because it's very important for us. Like this, no body will buy this v8 finder.

Marcelo 10
Posts: 9
Joined: Sun Mar 18, 2018 7:30 pm

Re: v8 finder meter sq quality different from decoder

Post by Marcelo 10 » Tue Apr 23, 2019 11:19 pm

Olá Rogério ! Consegui fazer o GT MIDIA V8 meter funcionar em em transponder CCM. Porém a qualidade do aparelho, muito baixa. É só estou conseguindo locar o aparelho, nos transponder ACM do satélite 58 w nas TPS Horizontais. Nas TPS verticais, não consegui locar o aparelho. Principalmente nos satélites SES4 22w. TELSTAR 14R 63w. AMAZONAS 61w. HISPASAT 30w. Se nas próximas atualização do aparelho, a marca corrigir isso o aparelho, vai ficar show de bola...

rogerio_rodrigues
Posts: 22
Joined: Wed Feb 13, 2019 12:14 pm

Re: v8 finder meter sq quality different from decoder

Post by rogerio_rodrigues » Tue Apr 23, 2019 11:47 pm

Saiu uma atualização hj, dia 23_04 , olha se corrigiu...

slim
Posts: 6
Joined: Tue Apr 23, 2019 8:00 pm

Re: v8 finder meter sq quality different from decoder

Post by slim » Fri Apr 26, 2019 1:15 pm

I have received from AliExpress seller the update of 08/04/2019 for this GTMEDIA V8 FINDER which gives good signal value. So why the technical support hasnt taken this correction in the latest update of 23/04/2019. Is there a problem with the update of 08/04 which isn't available in your site? .

Hans_Rey
Posts: 19
Joined: Wed Oct 03, 2018 10:04 pm

Re: v8 finder meter sq quality different from decoder

Post by Hans_Rey » Fri Apr 26, 2019 2:00 pm

slim wrote:
Fri Apr 26, 2019 1:15 pm
I have received from AliExpress seller the update of 08/04/2019 for this GTMEDIA V8 FINDER which gives good signal value. So why the technical support hasnt taken this correction in the latest update of 23/04/2019. Is there a problem with the update of 08/04 which isn't available in your site? .
So, for now your finder show the correct sq reading after upgrade it with the 8.4.19 file ?

slim
Posts: 6
Joined: Tue Apr 23, 2019 8:00 pm

Re: v8 finder meter sq quality different from decoder

Post by slim » Fri Apr 26, 2019 2:54 pm

Hans_Rey wrote:
Fri Apr 26, 2019 2:00 pm
slim wrote:
Fri Apr 26, 2019 1:15 pm
I have received from AliExpress seller the update of 08/04/2019 for this GTMEDIA V8 FINDER which gives good signal value. So why the technical support hasnt taken this correction in the latest update of 23/04/2019. Is there a problem with the update of 08/04 which isn't available in your site? .
So, for now your finder show the correct sq reading after upgrade it with the 8.4.19 file ?
It's gives good signal value with this update.

JohnMethew
Posts: 10
Joined: Thu May 09, 2019 5:30 pm
Location: United States
Contact:

Re: v8 finder meter sq quality different from decoder

Post by JohnMethew » Thu May 09, 2019 5:38 pm

Recently i bought :roll: this product, i also have a same issue, Signal Quelity is very low...please let me know solution?

slim
Posts: 6
Joined: Tue Apr 23, 2019 8:00 pm

Re: v8 finder meter sq quality different from decoder

Post by slim » Wed May 15, 2019 8:04 pm

Give me your email, I will send you the update of 8 April. It gives a high signal

User avatar
Lining
网站管理员
Posts: 523
Joined: Thu Aug 11, 2016 11:14 am

Re: v8 finder meter sq quality different from decoder

Post by Lining » Thu May 16, 2019 4:11 am

Hans_Rey wrote:
Thu Apr 11, 2019 7:20 am
Hello
One my of my friend recently bought v8 finder meter. He figure out that signal quality shown at the device far below from the signal quality shown at decoder. Anyone facing the similar issue with this device?
We will update the version to resolve this issue. Increase the signal bar display
FREESAT brand change GT MEDlA

Hans_Rey
Posts: 19
Joined: Wed Oct 03, 2018 10:04 pm

Re: v8 finder meter sq quality different from decoder

Post by Hans_Rey » Thu May 16, 2019 5:21 am

Lining wrote:
Thu May 16, 2019 4:11 am
Hans_Rey wrote:
Thu Apr 11, 2019 7:20 am
Hello
One my of my friend recently bought v8 finder meter. He figure out that signal quality shown at the device far below from the signal quality shown at decoder. Anyone facing the similar issue with this device?
We will update the version to resolve this issue. Increase the signal bar display
Ver glad to hear that. Hope it will release soon.

rogerio_rodrigues
Posts: 22
Joined: Wed Feb 13, 2019 12:14 pm

Re: v8 finder meter sq quality different from decoder

Post by rogerio_rodrigues » Thu May 16, 2019 11:15 am

Lining wrote:
Thu May 16, 2019 4:11 am
Hans_Rey wrote:
Thu Apr 11, 2019 7:20 am
Hello
One my of my friend recently bought v8 finder meter. He figure out that signal quality shown at the device far below from the signal quality shown at decoder. Anyone facing the similar issue with this device?
We will update the version to resolve this issue. Increase the signal bar display
Good afternoon! Could you add decibel indicator in GTmedia v8 Meter e BT03? :?: :?: :?:

Hans_Rey
Posts: 19
Joined: Wed Oct 03, 2018 10:04 pm

Re: v8 finder meter sq quality different from decoder

Post by Hans_Rey » Thu May 23, 2019 8:20 am

Hi admin, thanks for the latest update. Signal value increase 10-40% from the previous one. However, it still 20-30% lower from the exact value shown at decoder. Hopefully your team will release another upgrade just to refines the value to make it same with the decoder signal value. Your kind attention is much appreciated. Please refer picture below.
Attachments
20190523_140121.jpg
20190523_140121.jpg (572.6 KiB) Viewed 786 times
20190523_124959.jpg
20190523_124959.jpg (539.16 KiB) Viewed 786 times

eliascattai
Posts: 32
Joined: Fri Apr 26, 2019 10:37 pm

Re: v8 finder meter sq quality different from decoder

Post by eliascattai » Thu May 23, 2019 10:20 am

Com essa nova atualização o V8 finder meter corrigiu o nível de sinal baixo. Não ficou igual a potência do receptor, mas já está muito bom para trabalhar.

Hans_Rey
Posts: 19
Joined: Wed Oct 03, 2018 10:04 pm

Re: v8 finder meter sq quality different from decoder

Post by Hans_Rey » Thu May 23, 2019 1:39 pm

Doesnt mean that i am not appreciate or grateful for what admin gtmedia have done, but i still believe there is still a lot to improve. I hope my post doesnt offend anyone or admin. Kudos to gtmedia team. :)

waqasjatt
Posts: 8
Joined: Mon Apr 15, 2019 9:19 pm

Re: v8 finder meter sq quality different from decoder

Post by waqasjatt » Sat May 25, 2019 11:20 pm

Recently I updated the latest firmware to increase signal value it's has been updated and it's work better then previous one but it's advise to freesat team to increase it more to 20% to 30% as in my decoder the signal bar is showing more then actual signap of my v8 finder meter.

Hope to slove this issue as soon as possible

Hans_Rey
Posts: 19
Joined: Wed Oct 03, 2018 10:04 pm

Re: v8 finder meter sq quality different from decoder

Post by Hans_Rey » Sun May 26, 2019 2:03 am

waqasjatt wrote:
Sat May 25, 2019 11:20 pm
Recently I updated the latest firmware to increase signal value it's has been updated and it's work better then previous one but it's advise to freesat team to increase it more to 20% to 30% as in my decoder the signal bar is showing more then actual signap of my v8 finder meter.

Hope to slove this issue as soon as possible
I am totally agree with you. I do rwally hope that soon, gtmedia admin will release sw upgrade that will refine the value to match up with decoder value signal reading. Once fixed, all user will be more happy with their finder :D

Post Reply