Just received a GTMEDIA Finder V8. First need is to properly point to a DirecTV connection. Seems likely that is not quite aligned to satellite 103.
I find no English language Youtube videos that walk through the basics of using the device. Is there a source of tutorial information?
TY
Mike
New Guy
Moderators: admin, GTMedia Team
-
- Posts: 2
- Joined: Tue May 04, 2021 5:40 am
Re: New Guy
same problem exist in july 2021, im having basic problems & having no luck, purchased new v8x & living rural i do not have access to a translator, regretting purchase!
-
- 网站管理员
- Posts: 9097
- Joined: Fri Aug 12, 2016 6:51 am
- Location: New Zealand
Re: New Guy
To find a satellite first look at web sites like dishpointer dot com.
These will help you align your dish in the correct direction and angle for the satellite your need.
You can also find the correct skew, the rotation of the LNB for your location and the satellite.
After that select a transponder, TP and very slowly move the dish a little until you see a signal level.
You can look at sites like lyngsat dot com to see what TP you should see.
The signal level / quality is slow to react on the finder.
I use a tone type finder in the LNB cable to find a satellite and then use the V8 Finder-meter to fine tune.
Good luck
Owen
These will help you align your dish in the correct direction and angle for the satellite your need.
Code: Select all
https://www.dishpointer.com/
After that select a transponder, TP and very slowly move the dish a little until you see a signal level.
You can look at sites like lyngsat dot com to see what TP you should see.
The signal level / quality is slow to react on the finder.
I use a tone type finder in the LNB cable to find a satellite and then use the V8 Finder-meter to fine tune.
Good luck
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.