Hello Development team
Is there any change that GTMEDIA finder V-73 HD the Symbol Rate can be lower then 1000 ks
More like 500,333,250 and 125 ks.
This will bring the device more into Ham Radio use.
You help will be more than welcome.
Best Regards Rob
Symbol Rate
Moderators: admin, GTMedia Team
-
Feralkiwi
- 网站管理员
- Posts: 9097
- Joined: Fri Aug 12, 2016 6:51 am
- Location: New Zealand
Re: Symbol Rate
Can you not enter less than 1000 manually?
If so you may be able to change that using a \Hex editor and change the user data file for that value.\I would suggest changing a TP to something like Sr of 1234 so you can find it in the user data file with the hex editor.
After you change it to what you need then reload the user file and see if it works.
I have seen freesat units NOT try to lock to low SR TP's, even when they use to do so, so this change by Hex editor may not work.
I would hope it does work, as the new Finder-meter has a different software base that the older Freesat units.
Owen
If so you may be able to change that using a \Hex editor and change the user data file for that value.\I would suggest changing a TP to something like Sr of 1234 so you can find it in the user data file with the hex editor.
After you change it to what you need then reload the user file and see if it works.
I have seen freesat units NOT try to lock to low SR TP's, even when they use to do so, so this change by Hex editor may not work.
I would hope it does work, as the new Finder-meter has a different software base that the older Freesat units.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.