Goodday,
Please, I have this message on my GT Media v8 finder 2 ,
" LNB short, please, check", and it's can not work. Someone can bring me some idea about? Thank you very much in advance.
"LNB short, Please check" message , GT Media v8 finder 2
Moderators: admin, GTMedia Team
-
- Posts: 2
- Joined: Mon Jun 02, 2025 6:23 pm
-
- Posts: 52
- Joined: Sun Feb 18, 2024 6:45 pm
Re: "LNB short, Please check" message , GT Media v8 finder 2
You may get a better reply if you post under the device in question. This thread is under the GTMEDIA X1 and Mate devices.
-
- Posts: 4155
- Joined: Mon Jan 09, 2017 2:31 pm
- Location: West Midlands UK
Re: "LNB short, Please check" message , GT Media v8 finder 2
As the other user has said, it would have been better to post in the correct section.
In the mean time, use the (Search Box) (Lnb Short) top right, there will be threads about this issue.
Den
In the mean time, use the (Search Box) (Lnb Short) top right, there will be threads about this issue.
Den
- CAJE
- 网站管理员
- Posts: 3000
- Joined: Sun Dec 06, 2020 8:00 pm
-
- Posts: 1
- Joined: Mon Jun 16, 2025 7:30 am
Re: "LNB short, Please check" message , GT Media v8 finder 2
- CAJE
- 网站管理员
- Posts: 3000
- Joined: Sun Dec 06, 2020 8:00 pm
Re: "LNB short, Please check" message , GT Media v8 finder 2
A short circuit can be caused by damaged cables or an antenna socket. Check the F connector; it could also be a failure in the finder itself.
-
- Posts: 116
- Joined: Tue Mar 05, 2019 7:16 pm
Re: "LNB short, Please check" message , GT Media v8 finder 2
That coax port that you use to connect to lnb to dish on the meter is very flimsy . My has broken twice on the inside causing a short . I had to take it apart and re solder it . The second time round I soldered the s##t out of it and now treat that part with much respect !
- CAJE
- 网站管理员
- Posts: 3000
- Joined: Sun Dec 06, 2020 8:00 pm
Re: "LNB short, Please check" message , GT Media v8 finder 2
It is best to use this type of quick connectors
- Attachments
-
- Quick F Connector
- 1002686168.jpg (673 KiB) Viewed 111 times
- Feralkiwi
- 网站管理员
- Posts: 9246
- Joined: Fri Aug 12, 2016 6:51 am
- Location: New Zealand
Re: "LNB short, Please check" message , GT Media v8 finder 2
I agree.
Many of the larger components on GT Media units are not correctly soldered to the board.
I have lost a USB off my GT Combo from that and a friend lost the LNB connector on his GT Combo too.
PUSH ON connectors are the way.
Was a time when GT Media sent a push on connector with the finders.
Owen
Dishes; 2x3m, 4.1m, 10+ ku, 2 movers, USARLS. V8Pro2, GTC, Finder2 + Pro1, Finder-Meter V8X / UHD V7Pro GT/X Combo, Freesat V8Ultra. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Who is online
Users browsing this forum: All compatible Bots and 0 guests