Impostazione frequenza fuori range per trasponder radioamatoriale

[ic8epv]

Ho appena acquistato la versione V8 Finder Pro e, in quanto radioamatore in datv, vorrei impostare una frequenza che è fuori range ordinario e precisamente QO100 (Es'Hail2 a 26° est) freq TP 10491 Mhz 1500 Ks. Lnb 9750-10550 Mhz. Qualcuno mi saprebbe dire se questa cosa è fattibile con questo modello?
Grazie

[STRETCH]

Try your lnb settings as (9750 - 10600).

Den

[ic8epv]

Thanks for the reply. Your indication does not help me to solve the problem. It is not possible to set a transponder other than the ordinary ones preset in the list that appears when the relative key is pressed. Frequency out of range, this is the warning that appears when I try to set the frequency of the existing amateur radio transponder on the Es'Hail2 satellite or QO-100.

[STRETCH]

Have you checked to see if you have any other lnb settings on your finder.
Also have you checked the (finder) section of the forum, plus the search box top right.

Den

[Feralkiwi]

If you set to 9750/10600 and then blind scan, does it scan in with an incorrect frequency?
If it does not scan in, look at the frequencies for other TP's that did scan in and calculate their frequency offset.
You can then calculate the off set frequency to manually enter the TP you require.

Good luck.

Owen