Nessun servizio dtt

[igor39]

Buongiorno ho un problema sul mio gt-media v8uhd, come si vede in foto il segnale del digitale terrestre è ottimo ma mi da nessun servizio e non capisco perché.
Anche cambiando liste o facendo di nuovo la ricerca il problema resta.

20250126_133930.jpg

[CAJE]

Non prestare attenzione ai valori della forza e della qualità, dai sempre buoni valori
Se vedi l'SNR dice che non c'è segnale

[igor39]

Su questo che va pure mi da snr o quindi non è quello

[CAJE]

Su questo che va pure mi da snr o quindi non è quello

Vedo che la Qualità funziona, ciò dimostra che non hai un buon segnale DTT

[igor39]

Però qui si vede e li no,che significa che.non ho buon segnale.si dovrebbe vedere allo stesso modo su entrambi.

[CAJE]

Dovresti consultare un tecnico specializzato in installazioni DTT per una valutazione più dettagliata.

[Feralkiwi]

I see that DVB-T 690MHz is seen with lower signal quality.
Frequency 610MHz with higher signal and quality is not saying "No Signal" but is saying "No Service"
"No Service" means that channel is no longer on that frequency.

I suggest a re scan of 610MHz.

Owen

[igor39]

I have done rescan but nothing changed.
I use same list on other gt-media v8uhd and all channels are ok.

[Feralkiwi]

Do you have the correct country set in DVB-T?

Try reloading your channel list?

Is there a code needed for that channel?
That it says No Service may also mean that you do not have a ccam account for that channel in that UHD unit.
I see it is not $$$ an encrypted channel. so maybe not the Ccam thing.

As I am translating, is "No Service" different from "No Signal" for your language?
Do you see No Signal reported by this UHD?

Another way is to delete the channel and then re scan it.
Just a re scan may not over write the old channel details.

Owen

[igor39]

Thank yoy for answer, i have same country settings in all gt-media v8uhd, tell me if there are other settings,the channels are all free to air.i have restando all channs but allways no service that is not no signal cause if I plug out cable i get no signal.

[Feralkiwi]

No service does mean there is no service for that channel.
One of the PIDs must be wrong.

Does the other UHD unit see this same channel on 601MHz?
When you press info twice, do you see the same numbers for that same channel on both UHD boxes?
SID VPID APID ??

Owen

[Feralkiwi]

Also in the "No Service" window there is this number:

V8UC2110263253

Does that mean anything to you?
The software version?
Your V8 UHD serial number?
The subscription Ccam service number for your other box?
The card number for a pay TV card that is in the box?

Owen

[CAJE]

Also in the "No Service" window there is this number:

V8UC2110263253

Does that mean anything to you?
The software version?
Your V8 UHD serial number?
The subscription Ccam service number for your other box?
The card number for a pay TV card that is in the box?

Owen

This is Mąrs IDBOX that appears when the channel is not playing

[igor39]

No service does mean there is no service for that channel.
One of the PIDs must be wrong.

Does the other UHD unit see this same channel on 601MHz?
When you press info twice, do you see the same numbers for that same channel on both UHD boxes?
SID VPID APID ??

Owen

Twice info botton does not give pid or sid information