Dudas GTMEDIA V9 Prime

Idioma español, discusión de productos GTMEDIA

Moderators: admin, GTMedia Team

paramiscosillas
Posts: 3
Joined: Mon Oct 27, 2025 6:15 pm

Dudas GTMEDIA V9 Prime

Post by paramiscosillas »

Hola buenas, soy nuevo por aquí y ando un poco perdido. A ver si alguien me puede dar un poco de luz.

Desde hace años he estado utilizando listas IPTV de pago y ahora me he decidido a adquirir un receptor GTMEDIA V9 Prime. Lo he comprado y está por llegarme en breve. Pero mi duda es que el vendedor me dice que solo he comprado el receptor y que tengo que comprar M.rs. Cosa que no se ni lo que es. Entiendo que será pagar por el servicio para poder ver lo que quiero.
He visto que hay que actualizar el firmaware y que existe la posibilidad de actualizarle la lista de canales.
Mi pregunta es... tengo que comprar esto del M.rs, (no se si al mismo vendedor del receptor) entiendo y ya puestos donde lo hago y cuanto tiempo me durará?

Muchas gracias por aguantar la chapa y a ver si algún alma caritativa me echa un cable.

User avatar
Feralkiwi
网站管理员
Posts: 9340
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Dudas GTMEDIA V9 Prime

Post by Feralkiwi »

Dishes; 2x3m, 4.1m, 10+ ku, 2 movers, USARLS. V8Pro2, GTC, Finder2 + Pro1, Finder-Meter V8X / UHD V7Pro GT/X Combo, Freesat V8Ultra. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

paramiscosillas
Posts: 3
Joined: Mon Oct 27, 2025 6:15 pm

Re: Dudas GTMEDIA V9 Prime

Post by paramiscosillas »


Thank you very much for your reply and for the links. I understand that they are meant to update the receiver’s firmware. But then I still need to separately purchase the M.rs service, is that correct?

By the way, the Facebook link is not working for me.

User avatar
Feralkiwi
网站管理员
Posts: 9340
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Dudas GTMEDIA V9 Prime

Post by Feralkiwi »

Sorry I don't use that.
I think yes.

Changing to m a r s is easy, changing back to GT Media software in harder.

CAJE will give you full answers on this.

Look for the facebook group.

Owen

Posted by others
Hello

I suggest you go to the M.rs page discussion and look for support. We dont discuss M.rs any furthers here.

https://www.facebook.com/share/g/1AoheLNLBZ/
Dishes; 2x3m, 4.1m, 10+ ku, 2 movers, USARLS. V8Pro2, GTC, Finder2 + Pro1, Finder-Meter V8X / UHD V7Pro GT/X Combo, Freesat V8Ultra. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

paramiscosillas
Posts: 3
Joined: Mon Oct 27, 2025 6:15 pm

Re: Dudas GTMEDIA V9 Prime

Post by paramiscosillas »

Feralkiwi wrote:
Mon Oct 27, 2025 7:13 pm
Sorry I don't use that.
I think yes.

Changing to m a r s is easy, changing back to GT Media software in harder.

CAJE will give you full answers on this.

Look for the facebook group.

Owen

Posted by others
Hello

I suggest you go to the M.rs page discussion and look for support. We dont discuss M.rs any furthers here.

https://www.facebook.com/share/g/1AoheLNLBZ/
Ok, thank you very much for the information, and sorry for the inconvenience.
Best regards.

User avatar
CAJE
网站管理员
Posts: 3090
Joined: Sun Dec 06, 2020 8:00 pm

Re: Dudas GTMEDIA V9 Prime

Post by CAJE »

paramiscosillas wrote:
Mon Oct 27, 2025 7:16 pm
Feralkiwi wrote:
Mon Oct 27, 2025 7:13 pm
Sorry I don't use that.
I think yes.

Changing to m a r s is easy, changing back to GT Media software in harder.

CAJE will give you full answers on this.

Look for the facebook group.

Owen

Posted by others
Hello

I suggest you go to the M.rs page discussion and look for support. We dont discuss M.rs any furthers here.

https://www.facebook.com/share/g/1AoheLNLBZ/
Ok, thank you very much for the information, and sorry for the inconvenience.
Best regards.
It is best to use the programming clamp, cheaper than the USB to JST RS232 cable.
viewtopic.php?f=33&t=28032&p=141311&hilit=Ch341#p141311

User avatar
Feralkiwi
网站管理员
Posts: 9340
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Dudas GTMEDIA V9 Prime

Post by Feralkiwi »

CAJE wrote:
Mon Oct 27, 2025 7:31 pm
[
It is best to use the programming clamp, cheaper than the USB to JST RS232 cable.
viewtopic.php?f=33&t=28032&p=141311&hilit=Ch341#p141311
That is for return to GT Media software.

The change to m a r s is done in the menus.

Owen

CAJE please advise on this.
paramiscosillas wrote:
Mon Oct 27, 2025 6:20 pm
Hola buenas, soy nuevo por aquí y ando un poco perdido. A ver si alguien me puede dar un poco de luz.

Desde hace años he estado utilizando listas IPTV de pago y ahora me he decidido a adquirir un receptor GTMEDIA V9 Prime. Lo he comprado y está por llegarme en breve. Pero mi duda es que el vendedor me dice que solo he comprado el receptor y que tengo que comprar M.rs. Cosa que no se ni lo que es. Entiendo que será pagar por el servicio para poder ver lo que quiero.
He visto que hay que actualizar el firmaware y que existe la posibilidad de actualizarle la lista de canales.
Mi pregunta es... tengo que comprar esto del M.rs, (no se si al mismo vendedor del receptor) entiendo y ya puestos donde lo hago y cuanto tiempo me durará?

Muchas gracias por aguantar la chapa y a ver si algún alma caritativa me echa un cable.
Dishes; 2x3m, 4.1m, 10+ ku, 2 movers, USARLS. V8Pro2, GTC, Finder2 + Pro1, Finder-Meter V8X / UHD V7Pro GT/X Combo, Freesat V8Ultra. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

User avatar
CAJE
网站管理员
Posts: 3090
Joined: Sun Dec 06, 2020 8:00 pm

Re: Dudas GTMEDIA V9 Prime

Post by CAJE »

paramiscosillas wrote:
Mon Oct 27, 2025 6:20 pm
Hola buenas, soy nuevo por aquí y ando un poco perdido. A ver si alguien me puede dar un poco de luz.

Desde hace años he estado utilizando listas IPTV de pago y ahora me he decidido a adquirir un receptor GTMEDIA V9 Prime. Lo he comprado y está por llegarme en breve. Pero mi duda es que el vendedor me dice que solo he comprado el receptor y que tengo que comprar M.rs. Cosa que no se ni lo que es. Entiendo que será pagar por el servicio para poder ver lo que quiero.
He visto que hay que actualizar el firmaware y que existe la posibilidad de actualizarle la lista de canales.
Mi pregunta es... tengo que comprar esto del M.rs, (no se si al mismo vendedor del receptor) entiendo y ya puestos donde lo hago y cuanto tiempo me durará?

Muchas gracias por aguantar la chapa y a ver si algún alma caritativa me echa un cable.
Tienes que poner este firmware y poner los dos archivos en la raiz del USB, te saldrá una IDBox que es lo que necesita el vendedor

Who is online

Users browsing this forum: All compatible Bots and 3 guests