Galaxy 3c no cazado por el SATfinder bt05
Moderators: admin, GTMedia Team
-
- Posts: 1
- Joined: Wed Jul 05, 2023 5:43 pm
Galaxy 3c no cazado por el SATfinder bt05
Saludos a TODOS....por favor ayúdenme a cazar el SAT de DirecTV galaxy 3c con mi SATfinder bt05 azúl...ya q llevo dias , MESES intentando y de ninguna manera me a funcionado...quien lo a cazado con ese modelo de SATfinder bt05 el galaxy 3c????? Gracias de antemano
-
- 网站管理员
- Posts: 7260
- Joined: Thu Aug 11, 2016 1:41 pm
Re: Galaxy 3c no cazado por el SATfinder bt05
Señal ku o ka circular. Need s. Need LNB accordinglyedyperez475 wrote: ↑Wed Jul 05, 2023 6:24 pmSaludos a TODOS....por favor ayúdenme a cazar el SAT de DirecTV galaxy 3c con mi SATfinder bt05 azúl...ya q llevo dias , MESES intentando y de ninguna manera me a funcionado...quien lo a cazado con ese modelo de SATfinder bt05 el galaxy 3c????? Gracias de antemano
-
- Posts: 66
- Joined: Mon Sep 07, 2020 3:36 am
-
- 网站管理员
- Posts: 9104
- Joined: Fri Aug 12, 2016 6:51 am
- Location: New Zealand
Re: Galaxy 3c no cazado por el SATfinder bt05
I wonder if the scan is not scanning the full or enough or the IF band of the input of the finder.
I had this issue with some C Band LNB's.
When they set up the GT Combo the setting for One Cable Solution LNB's 5150/5750 was only scanning half the IF frequency of the input.
To check, maybe set the LNB frequency to 5150/5750 and blind scan as that should scan the full IF of 950 to 2150 MHz.
Any TP found will report the incorrect frequency, but if it is there it will show.
Owen
I had this issue with some C Band LNB's.
When they set up the GT Combo the setting for One Cable Solution LNB's 5150/5750 was only scanning half the IF frequency of the input.
To check, maybe set the LNB frequency to 5150/5750 and blind scan as that should scan the full IF of 950 to 2150 MHz.
Any TP found will report the incorrect frequency, but if it is there it will show.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
- Posts: 1
- Joined: Thu Jul 13, 2023 10:32 am
Re: Galaxy 3c no cazado por el SATfinder bt05
To troubleshoot this, you can try adjusting the LNB frequency to 5150/5750 and perform a blind scan. A blind scan should scan the full IF frequency range of 950 to 2150 MHz. If there are any transponder signals present, they may be reported with incorrect frequencies, but they should still appear in the scan results.Feralkiwi wrote: ↑Thu Jul 06, 2023 3:00 amI wonder if the scan is not scanning the full or enough or the IF band of the input of the finder.
I had this issue with some C Band LNB's.
When they set up the GT Combo the setting for One Cable Solution LNB's 5150/5750 was only scanning half the IF frequency of the input.
To check, maybe set the LNB frequency to 5150/5750 and blind scan as that should scan the full IF of 950 to 2150 MHz.
Any TP found will report the incorrect frequency, but if it is there it will show.
Owen
-
- Posts: 53
- Joined: Mon Jul 12, 2021 11:54 pm
- Location: Argentina
Re: Galaxy 3c no cazado por el SATfinder bt05
Hola
El satélite Galaxy 3C solo es cazable desde Norte América (https://www.lyngsat.com/Galaxy-3C.html) y el único TP que se puede encontrar con ese buscado de satélites es el 12121H2653, dado que el resto de los TP están modulados en DSS y ese "receptor" no los ve. Además de estar sobre la huella del satélite y tener el tamaño adecuado de antena.
Hay que entender que estos buscadores de satélites tienen una concepción para afinamiento más que para ayudar en el apuntamiento; para poder ayudar en un apuntamiento tendrían que tener una parte analógica y no la traen, lo mejor para estos casos es un buscador de aguja de los más baratos.
Saludos
El satélite Galaxy 3C solo es cazable desde Norte América (https://www.lyngsat.com/Galaxy-3C.html) y el único TP que se puede encontrar con ese buscado de satélites es el 12121H2653, dado que el resto de los TP están modulados en DSS y ese "receptor" no los ve. Además de estar sobre la huella del satélite y tener el tamaño adecuado de antena.
Hay que entender que estos buscadores de satélites tienen una concepción para afinamiento más que para ayudar en el apuntamiento; para poder ayudar en un apuntamiento tendrían que tener una parte analógica y no la traen, lo mejor para estos casos es un buscador de aguja de los más baratos.
Saludos